package CPAN; use vars qw{$Try_autoload $Revision $META $Signal $Cwd $End $Suppress_readline %Dontload $Frontend $Defaultsite }; $VERSION = '1.3901'; # $Id: CPAN.pm,v 1.226 1998/07/08 22:29:29 k Exp k $ # only used during development: $Revision = ""; # $Revision = "[".substr(q$Revision: 1.226 $, 10)."]"; use Carp (); use Config (); use Cwd (); use DirHandle; use Exporter (); use ExtUtils::MakeMaker (); use File::Basename (); use File::Copy (); use File::Find; use File::Path (); use FileHandle (); use Safe (); use Text::ParseWords (); use Text::Wrap; END { $End++; &cleanup; } %CPAN::DEBUG = qw( CPAN 1 Index 2 InfoObj 4 Author 8 Distribution 16 Bundle 32 Module 64 CacheMgr 128 Complete 256 FTP 512 Shell 1024 Eval 2048 Config 4096 Tarzip 8192 ); $CPAN::DEBUG ||= 0; $CPAN::Signal ||= 0; $CPAN::Frontend ||= "CPAN::Shell"; $CPAN::Defaultsite ||= "ftp://ftp.perl.org/pub/CPAN"; package CPAN; use vars qw($VERSION @EXPORT $AUTOLOAD $DEBUG $META $term); use strict qw(vars); @CPAN::ISA = qw(CPAN::Debug Exporter MM); # MM will go away # soonish. Already version # 1.29 doesn't rely on # catfile and catdir being # available via # inheritance. Anything else # in danger? @EXPORT = qw( autobundle bundle expand force get install make readme recompile shell test clean ); #-> sub CPAN::AUTOLOAD ; sub AUTOLOAD { my($l) = $AUTOLOAD; $l =~ s/.*:://; my(%EXPORT); @EXPORT{@EXPORT} = ''; if (exists $EXPORT{$l}){ CPAN::Shell->$l(@_); } else { my $ok = CPAN::Shell->try_dot_al($AUTOLOAD); if ($ok) { goto &$AUTOLOAD; # } else { # $CPAN::Frontend->mywarn("Could not autoload $AUTOLOAD"); } $CPAN::Frontend->mywarn(qq{Unknown command "$AUTOLOAD". }. qq{Type ? for help. }); } } #-> sub CPAN::shell ; sub shell { $Suppress_readline ||= ! -t STDIN; my $prompt = "cpan> "; local($^W) = 1; unless ($Suppress_readline) { require Term::ReadLine; # import Term::ReadLine; $term = Term::ReadLine->new('CPAN Monitor'); $readline::rl_completion_function = $readline::rl_completion_function = 'CPAN::Complete::cpl'; } no strict; $META->checklock(); my $getcwd; $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; my $cwd = CPAN->$getcwd(); my $rl_avail = $Suppress_readline ? "suppressed" : ($term->ReadLine ne "Term::ReadLine::Stub") ? "enabled" : "available (try ``install Bundle::CPAN'')"; $CPAN::Frontend->myprint( qq{ cpan shell -- CPAN exploration and modules installation (v$CPAN::VERSION$CPAN::Revision) ReadLine support $rl_avail }) unless $CPAN::Config->{'inhibit_startup_message'} ; my($continuation) = ""; while () { if ($Suppress_readline) { print $prompt; last unless defined ($_ = <> ); chomp; } else { last unless defined ($_ = $term->readline($prompt)); } $_ = "$continuation$_" if $continuation; s/^\s+//; next if /^$/; $_ = 'h' if $_ eq '?'; if (/^(?:q(?:uit)?|bye|exit)$/i) { last; } elsif (s/\\$//s) { chomp; $continuation = $_; $prompt = " > "; } elsif (/^\!/) { s/^\!//; my($eval) = $_; package CPAN::Eval; use vars qw($import_done); CPAN->import(':DEFAULT') unless $import_done++; CPAN->debug("eval[$eval]") if $CPAN::DEBUG; eval($eval); warn $@ if $@; $continuation = ""; $prompt = "cpan> "; } elsif (/./) { my(@line); if ($] < 5.00322) { # parsewords had a bug until recently @line = split; } else { eval { @line = Text::ParseWords::shellwords($_) }; warn($@), next if $@; } $CPAN::META->debug("line[".join("|",@line)."]") if $CPAN::DEBUG; my $command = shift @line; eval { CPAN::Shell->$command(@line) }; warn $@ if $@; chdir $cwd; $CPAN::Frontend->myprint("\n"); $continuation = ""; $prompt = "cpan> "; } } continue { $Signal=0; } } package CPAN::CacheMgr; @CPAN::CacheMgr::ISA = qw(CPAN::InfoObj CPAN); use File::Find; package CPAN::Config; import ExtUtils::MakeMaker 'neatvalue'; use vars qw(%can $dot_cpan); %can = ( 'commit' => "Commit changes to disk", 'defaults' => "Reload defaults from disk", 'init' => "Interactive setting of all options", ); package CPAN::FTP; use vars qw($Ua $Thesite $Themethod); @CPAN::FTP::ISA = qw(CPAN::Debug); package CPAN::Complete; @CPAN::Complete::ISA = qw(CPAN::Debug); package CPAN::Index; use vars qw($last_time $date_of_03); @CPAN::Index::ISA = qw(CPAN::Debug); $last_time ||= 0; $date_of_03 ||= 0; package CPAN::InfoObj; @CPAN::InfoObj::ISA = qw(CPAN::Debug); package CPAN::Author; @CPAN::Author::ISA = qw(CPAN::InfoObj); package CPAN::Distribution; @CPAN::Distribution::ISA = qw(CPAN::InfoObj); package CPAN::Bundle; @CPAN::Bundle::ISA = qw(CPAN::Module); package CPAN::Module; @CPAN::Module::ISA = qw(CPAN::InfoObj); package CPAN::Shell; use vars qw($AUTOLOAD $redef @ISA); @CPAN::Shell::ISA = qw(CPAN::Debug); #-> sub CPAN::Shell::AUTOLOAD ; sub AUTOLOAD { my($autoload) = $AUTOLOAD; my $class = shift(@_); # warn "autoload[$autoload] class[$class]"; $autoload =~ s/.*:://; if ($autoload =~ /^w/) { if ($CPAN::META->has_inst('CPAN::WAIT')) { CPAN::WAIT->$autoload(@_); } else { $CPAN::Frontend->mywarn(qq{ Commands starting with "w" require CPAN::WAIT to be installed. Please consider installing CPAN::WAIT to use the fulltext index. For this you just need to type install CPAN::WAIT }); } } else { my $ok = CPAN::Shell->try_dot_al($AUTOLOAD); if ($ok) { goto &$AUTOLOAD; # } else { # $CPAN::Frontend->mywarn("Could not autoload $autoload"); } $CPAN::Frontend->mywarn(qq{Unknown command '$autoload'. }. qq{Type ? for help. }); } } #-> CPAN::Shell::try_dot_al sub try_dot_al { my($class,$autoload) = @_; return unless $CPAN::Try_autoload; # I don't see how to re-use that from the AutoLoader... my($name,$ok); # Braces used to preserve $1 et al. { my ($pkg,$func) = $autoload =~ /(.*)::([^:]+)$/; $pkg =~ s|::|/|g; if (defined($name=$INC{"$pkg.pm"})) { $name =~ s|^(.*)$pkg\.pm$|$1auto/$pkg/$func.al|; $name = undef unless (-r $name); } unless (defined $name) { $name = "auto/$autoload.al"; $name =~ s|::|/|g; } } my $save = $@; eval {local $SIG{__DIE__};require $name}; if ($@) { if (substr($autoload,-9) eq '::DESTROY') { *$autoload = sub {}; $ok = 1; } else { if ($name =~ s/(\w{12,})\.al$/substr($1,0,11).".al"/e){ eval {local $SIG{__DIE__};require $name}; } if ($@){ $@ =~ s/ at .*\n//; Carp::croak $@; } else { $ok = 1; } } } else { $ok = 1; } $@ = $save; # my $lm = Carp::longmess(); # warn "ok[$ok] autoload[$autoload] longmess[$lm]"; # debug return $ok; } #### autoloader is experimental #### to try it we have to set $Try_autoload and uncomment #### the use statement and uncomment the __END__ below #### You also need AutoSplit 1.01 available. MakeMaker will #### then build CPAN with all the AutoLoad stuff. # use AutoLoader; # $Try_autoload = 1; if ($CPAN::Try_autoload) { my $p; for $p (qw( CPAN::Author CPAN::Bundle CPAN::CacheMgr CPAN::Complete CPAN::Config CPAN::Debug CPAN::Distribution CPAN::FTP CPAN::FTP::netrc CPAN::Index CPAN::InfoObj CPAN::Module )) { *{"$p\::AUTOLOAD"} = \&AutoLoader::AUTOLOAD; } } package CPAN::Tarzip; use vars qw($AUTOLOAD @ISA); @CPAN::Tarzip::ISA = qw(CPAN::Debug); package CPAN::Queue; # currently only used to determine if we should or shouldn't announce # the availability of a new CPAN module sub new { my($class,$mod) = @_; # warn "Queue object for mod[$mod]"; bless {mod => $mod}, $class; } package CPAN; $META ||= CPAN->new; # In case we reeval ourselves we # need a || # Do this after you have set up the whole inheritance CPAN::Config->load unless defined $CPAN::No_Config_is_ok; 1; # __END__ # uncomment this and AutoSplit version 1.01 will split it #-> sub CPAN::autobundle ; sub autobundle; #-> sub CPAN::bundle ; sub bundle; #-> sub CPAN::expand ; sub expand; #-> sub CPAN::force ; sub force; #-> sub CPAN::install ; sub install; #-> sub CPAN::make ; sub make; #-> sub CPAN::clean ; sub clean; #-> sub CPAN::test ; sub test; #-> sub CPAN::all ; sub all { my($mgr,$class) = @_; CPAN->debug("mgr[$mgr] class[$class]") if $CPAN::DEBUG; CPAN::Index->reload; values %{ $META->{$class} }; } # Called by shell, not in batch mode. Not clean XXX #-> sub CPAN::checklock ; sub checklock { my($self) = @_; my $lockfile = MM->catfile($CPAN::Config->{cpan_home},".lock"); if (-f $lockfile && -M _ > 0) { my $fh = FileHandle->new($lockfile); my $other = <$fh>; $fh->close; if (defined $other && $other) { chomp $other; return if $$==$other; # should never happen $CPAN::Frontend->mywarn( qq{ There seems to be running another CPAN process ($other). Contacting... }); if (kill 0, $other) { $CPAN::Frontend->mydie(qq{Other job is running. You may want to kill it and delete the lockfile, maybe. On UNIX try: kill $other rm $lockfile }); } elsif (-w $lockfile) { my($ans) = ExtUtils::MakeMaker::prompt (qq{Other job not responding. Shall I overwrite }. qq{the lockfile? (Y/N)},"y"); $CPAN::Frontend->myexit("Ok, bye\n") unless $ans =~ /^y/i; } else { Carp::croak( qq{Lockfile $lockfile not writeable by you. }. qq{Cannot proceed.\n}. qq{ On UNIX try:\n}. qq{ rm $lockfile\n}. qq{ and then rerun us.\n} ); } } } File::Path::mkpath($CPAN::Config->{cpan_home}); my $fh; unless ($fh = FileHandle->new(">$lockfile")) { if ($! =~ /Permission/) { my $incc = $INC{'CPAN/Config.pm'}; my $myincc = MM->catfile($ENV{HOME},'.cpan','CPAN','MyConfig.pm'); $CPAN::Frontend->myprint(qq{ Your configuration suggests that CPAN.pm should use a working directory of $CPAN::Config->{cpan_home} Unfortunately we could not create the lock file $lockfile due to permission problems. Please make sure that the configuration variable \$CPAN::Config->{cpan_home} points to a directory where you can write a .lock file. You can set this variable in either $incc or $myincc }); } $CPAN::Frontend->mydie("Could not open >$lockfile: $!"); } $fh->print($$, "\n"); $self->{LOCK} = $lockfile; $fh->close; $SIG{'TERM'} = sub { &cleanup; $CPAN::Frontend->mydie("Got SIGTERM, leaving"); }; $SIG{'INT'} = sub { # no blocks!!! &cleanup if $Signal; $CPAN::Frontend->mydie("Got another SIGINT") if $Signal; print "Caught SIGINT\n"; $Signal++; }; $SIG{'__DIE__'} = \&cleanup; $self->debug("Signal handler set.") if $CPAN::DEBUG; } #-> sub CPAN::DESTROY ; sub DESTROY { &cleanup; # need an eval? } #-> sub CPAN::cwd ; sub cwd {Cwd::cwd();} #-> sub CPAN::getcwd ; sub getcwd {Cwd::getcwd();} #-> sub CPAN::exists ; sub exists { my($mgr,$class,$id) = @_; CPAN::Index->reload; ### Carp::croak "exists called without class argument" unless $class; $id ||= ""; exists $META->{$class}{$id}; } #-> sub CPAN::delete ; sub delete { my($mgr,$class,$id) = @_; delete $META->{$class}{$id}; } #-> sub CPAN::has_inst sub has_inst { my($self,$mod,$message) = @_; Carp::croak("CPAN->has_inst() called without an argument") unless defined $mod; if (defined $message && $message eq "no") { $Dontload{$mod}||=1; return 0; } elsif (exists $Dontload{$mod}) { return 0; } my $file = $mod; my $obj; $file =~ s|::|/|g; $file =~ s|/|\\|g if $^O eq 'MSWin32'; $file .= ".pm"; if ($INC{$file}) { # warn "$file in %INC"; #debug return 1; } elsif (eval { require $file }) { # eval is good: if we haven't yet read the database it's # perfect and if we have installed the module in the meantime, # it tries again. The second require is only a NOOP returning # 1 if we had success, otherwise it's retrying $CPAN::Frontend->myprint("CPAN: $mod loaded ok\n"); if ($mod eq "CPAN::WAIT") { push @CPAN::Shell::ISA, CPAN::WAIT; } return 1; } elsif ($mod eq "Net::FTP") { warn qq{ Please, install Net::FTP as soon as possible. CPAN.pm installs it for you if you just type install Bundle::libnet }; sleep 2; } elsif ($mod eq "MD5"){ $CPAN::Frontend->myprint(qq{ CPAN: MD5 security checks disabled because MD5 not installed. Please consider installing the MD5 module. }); sleep 2; } return 0; } #-> sub CPAN::instance ; sub instance { my($mgr,$class,$id) = @_; CPAN::Index->reload; $id ||= ""; $META->{$class}{$id} ||= $class->new(ID => $id ); } #-> sub CPAN::new ; sub new { bless {}, shift; } #-> sub CPAN::cleanup ; sub cleanup { local $SIG{__DIE__} = ''; my $i = 0; my $ineval = 0; my $sub; while ((undef,undef,undef,$sub) = caller(++$i)) { $ineval = 1, last if $sub eq '(eval)'; } return if $ineval && !$End; return unless defined $META->{'LOCK'}; return unless -f $META->{'LOCK'}; unlink $META->{'LOCK'}; $CPAN::Frontend->mywarn("Lockfile removed.\n"); } package CPAN::CacheMgr; #-> sub CPAN::CacheMgr::as_string ; sub as_string { eval { require Data::Dumper }; if ($@) { return shift->SUPER::as_string; } else { return Data::Dumper::Dumper(shift); } } #-> sub CPAN::CacheMgr::cachesize ; sub cachesize { shift->{DU}; } sub tidyup { my($self) = @_; return unless -d $self->{ID}; while ($self->{DU} > $self->{'MAX'} ) { my($toremove) = shift @{$self->{FIFO}}; $CPAN::Frontend->myprint(sprintf( "Deleting from cache". ": $toremove (%.1f>%.1f MB)\n", $self->{DU}, $self->{'MAX'}) ); return if $CPAN::Signal; $self->force_clean_cache($toremove); return if $CPAN::Signal; } } #-> sub CPAN::CacheMgr::dir ; sub dir { shift->{ID}; } #-> sub CPAN::CacheMgr::entries ; sub entries { my($self,$dir) = @_; return unless defined $dir; $self->debug("reading dir[$dir]") if $CPAN::DEBUG; $dir ||= $self->{ID}; my $getcwd; $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; my($cwd) = CPAN->$getcwd(); chdir $dir or Carp::croak("Can't chdir to $dir: $!"); my $dh = DirHandle->new(".") or Carp::croak("Couldn't opendir $dir: $!"); my(@entries); for ($dh->read) { next if $_ eq "." || $_ eq ".."; if (-f $_) { push @entries, MM->catfile($dir,$_); } elsif (-d _) { push @entries, MM->catdir($dir,$_); } else { $CPAN::Frontend->mywarn("Warning: weird direntry in $dir: $_\n"); } } chdir $cwd or Carp::croak("Can't chdir to $cwd: $!"); sort { -M $b <=> -M $a} @entries; } #-> sub CPAN::CacheMgr::disk_usage ; sub disk_usage { my($self,$dir) = @_; return if exists $self->{SIZE}{$dir}; return if $CPAN::Signal; my($Du) = 0; find( sub { $File::Find::prune++ if $CPAN::Signal; return if -l $_; $Du += -s _; }, $dir ); return if $CPAN::Signal; $self->{SIZE}{$dir} = $Du/1024/1024; push @{$self->{FIFO}}, $dir; $self->debug("measured $dir is $Du") if $CPAN::DEBUG; $self->{DU} += $Du/1024/1024; $self->{DU}; } #-> sub CPAN::CacheMgr::force_clean_cache ; sub force_clean_cache { my($self,$dir) = @_; return unless -e $dir; $self->debug("have to rmtree $dir, will free $self->{SIZE}{$dir}") if $CPAN::DEBUG; File::Path::rmtree($dir); $self->{DU} -= $self->{SIZE}{$dir}; delete $self->{SIZE}{$dir}; } #-> sub CPAN::CacheMgr::new ; sub new { my $class = shift; my $time = time; my($debug,$t2); $debug = ""; my $self = { ID => $CPAN::Config->{'build_dir'}, MAX => $CPAN::Config->{'build_cache'}, DU => 0 }; File::Path::mkpath($self->{ID}); my $dh = DirHandle->new($self->{ID}); bless $self, $class; my $e; $CPAN::Frontend->myprint( sprintf("Scanning cache %s for sizes\n", $self->{ID})); for $e ($self->entries($self->{ID})) { next if $e eq ".." || $e eq "."; $self->disk_usage($e); return if $CPAN::Signal; } $self->tidyup; $t2 = time; $debug .= "timing of CacheMgr->new: ".($t2 - $time); $time = $t2; CPAN->debug($debug) if $CPAN::DEBUG; $self; } package CPAN::Debug; #-> sub CPAN::Debug::debug ; sub debug { my($self,$arg) = @_; my($caller,$func,$line,@rest) = caller(1); # caller(0) eg # Complete, caller(1) # eg readline ($caller) = caller(0); $caller =~ s/.*:://; $arg = "" unless defined $arg; my $rest = join "|", map { defined $_ ? $_ : "UNDEF" } @rest; if ($CPAN::DEBUG{$caller} & $CPAN::DEBUG){ if ($arg and ref $arg) { eval { require Data::Dumper }; if ($@) { $CPAN::Frontend->myprint($arg->as_string); } else { $CPAN::Frontend->myprint(Data::Dumper::Dumper($arg)); } } else { $CPAN::Frontend->myprint("Debug($caller:$func,$line,[$rest]): $arg\n"); } } } package CPAN::Config; #-> sub CPAN::Config::edit ; sub edit { my($class,@args) = @_; return unless @args; CPAN->debug("class[$class]args[".join(" | ",@args)."]"); my($o,$str,$func,$args,$key_exists); $o = shift @args; if($can{$o}) { $class->$o(@args); return 1; } else { if (ref($CPAN::Config->{$o}) eq ARRAY) { $func = shift @args; $func ||= ""; # Let's avoid eval, it's easier to comprehend without. if ($func eq "push") { push @{$CPAN::Config->{$o}}, @args; } elsif ($func eq "pop") { pop @{$CPAN::Config->{$o}}; } elsif ($func eq "shift") { shift @{$CPAN::Config->{$o}}; } elsif ($func eq "unshift") { unshift @{$CPAN::Config->{$o}}, @args; } elsif ($func eq "splice") { splice @{$CPAN::Config->{$o}}, @args; } elsif (@args) { $CPAN::Config->{$o} = [@args]; } else { $CPAN::Frontend->myprint( join "", " $o ", ExtUtils::MakeMaker::neatvalue($CPAN::Config->{$o}), "\n" ); } } else { $CPAN::Config->{$o} = $args[0] if defined $args[0]; $CPAN::Frontend->myprint(" $o " . (defined $CPAN::Config->{$o} ? $CPAN::Config->{$o} : "UNDEFINED")); } } } #-> sub CPAN::Config::commit ; sub commit { my($self,$configpm) = @_; unless (defined $configpm){ $configpm ||= $INC{"CPAN/MyConfig.pm"}; $configpm ||= $INC{"CPAN/Config.pm"}; $configpm || Carp::confess(qq{ CPAN::Config::commit called without an argument. Please specify a filename where to save the configuration or try "o conf init" to have an interactive course through configing. }); } my($mode); if (-f $configpm) { $mode = (stat $configpm)[2]; if ($mode && ! -w _) { Carp::confess("$configpm is not writable"); } } my $msg = <new; open $fh, ">$configpm" or warn "Couldn't open >$configpm: $!"; $fh->print(qq[$msg\$CPAN::Config = \{\n]); foreach (sort keys %$CPAN::Config) { $fh->print( " '$_' => ", ExtUtils::MakeMaker::neatvalue($CPAN::Config->{$_}), ",\n" ); } $fh->print("};\n1;\n__END__\n"); close $fh; #$mode = 0444 | ( $mode & 0111 ? 0111 : 0 ); #chmod $mode, $configpm; ###why was that so? $self->defaults; $CPAN::Frontend->myprint("commit: wrote $configpm\n"); 1; } *default = \&defaults; #-> sub CPAN::Config::defaults ; sub defaults { my($self) = @_; $self->unload; $self->load; 1; } sub init { my($self) = @_; undef $CPAN::Config->{'inhibit_startup_message'}; # lazy trick to # have the least # important # variable # undefined $self->load; 1; } #-> sub CPAN::Config::load ; sub load { my($self) = shift; my(@miss); eval {require CPAN::Config;}; # We eval because of some # MakeMaker problems unless ($dot_cpan++){ unshift @INC, MM->catdir($ENV{HOME},".cpan"); eval {require CPAN::MyConfig;}; # where you can override # system wide settings shift @INC; } return unless @miss = $self->not_loaded; # XXX better check for arrayrefs too require CPAN::FirstTime; my($configpm,$fh,$redo,$theycalled); $redo ||= ""; $theycalled++ if @miss==1 && $miss[0] eq 'inhibit_startup_message'; if (defined $INC{"CPAN/Config.pm"} && -w $INC{"CPAN/Config.pm"}) { $configpm = $INC{"CPAN/Config.pm"}; $redo++; } elsif (defined $INC{"CPAN/MyConfig.pm"} && -w $INC{"CPAN/MyConfig.pm"}) { $configpm = $INC{"CPAN/MyConfig.pm"}; $redo++; } else { my($path_to_cpan) = File::Basename::dirname($INC{"CPAN.pm"}); my($configpmdir) = MM->catdir($path_to_cpan,"CPAN"); my($configpmtest) = MM->catfile($configpmdir,"Config.pm"); if (-d $configpmdir or File::Path::mkpath($configpmdir)) { if (-w $configpmtest) { $configpm = $configpmtest; } elsif (-w $configpmdir) { #_#_# following code dumped core on me with 5.003_11, a.k. unlink "$configpmtest.bak" if -f "$configpmtest.bak"; rename $configpmtest, "$configpmtest.bak" if -f $configpmtest; my $fh = FileHandle->new; if ($fh->open(">$configpmtest")) { $fh->print("1;\n"); $configpm = $configpmtest; } else { # Should never happen Carp::confess("Cannot open >$configpmtest"); } } } unless ($configpm) { $configpmdir = MM->catdir($ENV{HOME},".cpan","CPAN"); File::Path::mkpath($configpmdir); $configpmtest = MM->catfile($configpmdir,"MyConfig.pm"); if (-w $configpmtest) { $configpm = $configpmtest; } elsif (-w $configpmdir) { #_#_# following code dumped core on me with 5.003_11, a.k. my $fh = FileHandle->new; if ($fh->open(">$configpmtest")) { $fh->print("1;\n"); $configpm = $configpmtest; } else { # Should never happen Carp::confess("Cannot open >$configpmtest"); } } else { Carp::confess(qq{WARNING: CPAN.pm is unable to }. qq{create a configuration file.}); } } } local($") = ", "; $CPAN::Frontend->myprint(qq{ We have to reconfigure CPAN.pm due to following uninitialized parameters: @miss }) if $redo && ! $theycalled; $CPAN::Frontend->myprint(qq{ $configpm initialized. }); sleep 2; CPAN::FirstTime::init($configpm); } #-> sub CPAN::Config::not_loaded ; sub not_loaded { my(@miss); for (qw( cpan_home keep_source_where build_dir build_cache index_expire gzip tar unzip make pager makepl_arg make_arg make_install_arg urllist inhibit_startup_message ftp_proxy http_proxy no_proxy )) { push @miss, $_ unless defined $CPAN::Config->{$_}; } return @miss; } #-> sub CPAN::Config::unload ; sub unload { delete $INC{'CPAN/MyConfig.pm'}; delete $INC{'CPAN/Config.pm'}; } *h = \&help; #-> sub CPAN::Config::help ; sub help { $CPAN::Frontend->myprint(qq{ Known options: defaults reload default config values from disk commit commit session changes to disk init go through a dialog to set all parameters You may edit key values in the follow fashion: o conf build_cache 15 o conf build_dir "/foo/bar" o conf urllist shift o conf urllist unshift ftp://ftp.foo.bar/ }); undef; #don't reprint CPAN::Config } #-> sub CPAN::Config::cpl ; sub cpl { my($word,$line,$pos) = @_; $word ||= ""; CPAN->debug("word[$word] line[$line] pos[$pos]") if $CPAN::DEBUG; my(@words) = split " ", substr($line,0,$pos+1); if ( defined($words[2]) and ( $words[2] =~ /list$/ && @words == 3 || $words[2] =~ /list$/ && @words == 4 && length($word) ) ) { return grep /^\Q$word\E/, qw(splice shift unshift pop push); } elsif (@words >= 4) { return (); } my(@o_conf) = (keys %CPAN::Config::can, keys %$CPAN::Config); return grep /^\Q$word\E/, @o_conf; } package CPAN::Shell; #-> sub CPAN::Shell::h ; sub h { my($class,$about) = @_; if (defined $about) { $CPAN::Frontend->myprint("Detailed help not yet implemented\n"); } else { $CPAN::Frontend->myprint(q{ command arguments description a string authors b or display bundles d /regex/ info distributions m or about modules i none anything of above r as reinstall recommendations u above uninstalled distributions See manpage for autobundle, recompile, force, look, etc. make make test modules, make test (implies make) install dists, bundles, make install (implies test) clean "r" or "u" make clean readme display the README file reload index|cpan load most recent indices/CPAN.pm h or ? display this menu o various set and query options ! perl-code eval a perl command q quit the shell subroutine }); } } *help = \&h; #-> sub CPAN::Shell::a ; sub a { $CPAN::Frontend->myprint(shift->format_result('Author',@_));} #-> sub CPAN::Shell::b ; sub b { my($self,@which) = @_; CPAN->debug("which[@which]") if $CPAN::DEBUG; my($incdir,$bdir,$dh); foreach $incdir ($CPAN::Config->{'cpan_home'},@INC) { $bdir = MM->catdir($incdir,"Bundle"); if ($dh = DirHandle->new($bdir)) { # may fail my($entry); for $entry ($dh->read) { next if -d MM->catdir($bdir,$entry); next unless $entry =~ s/\.pm$//; $CPAN::META->instance('CPAN::Bundle',"Bundle::$entry"); } } } $CPAN::Frontend->myprint($self->format_result('Bundle',@which)); } #-> sub CPAN::Shell::d ; sub d { $CPAN::Frontend->myprint(shift->format_result('Distribution',@_));} #-> sub CPAN::Shell::m ; sub m { $CPAN::Frontend->myprint(shift->format_result('Module',@_));} #-> sub CPAN::Shell::i ; sub i { my($self) = shift; my(@args) = @_; my(@type,$type,@m); @type = qw/Author Bundle Distribution Module/; @args = '/./' unless @args; my(@result); for $type (@type) { push @result, $self->expand($type,@args); } my $result = @result == 1 ? $result[0]->as_string : join "", map {$_->as_glimpse} @result; $result ||= "No objects found of any type for argument @args\n"; $CPAN::Frontend->myprint($result); } #-> sub CPAN::Shell::o ; sub o { my($self,$o_type,@o_what) = @_; $o_type ||= ""; CPAN->debug("o_type[$o_type] o_what[".join(" | ",@o_what)."]\n"); if ($o_type eq 'conf') { shift @o_what if @o_what && $o_what[0] eq 'help'; if (!@o_what) { my($k,$v); $CPAN::Frontend->myprint("CPAN::Config options"); if (exists $INC{'CPAN/Config.pm'}) { $CPAN::Frontend->myprint(" from $INC{'CPAN/Config.pm'}"); } if (exists $INC{'CPAN/MyConfig.pm'}) { $CPAN::Frontend->myprint(" and $INC{'CPAN/MyConfig.pm'}"); } $CPAN::Frontend->myprint(":\n"); for $k (sort keys %CPAN::Config::can) { $v = $CPAN::Config::can{$k}; $CPAN::Frontend->myprint(sprintf " %-18s %s\n", $k, $v); } $CPAN::Frontend->myprint("\n"); for $k (sort keys %$CPAN::Config) { $v = $CPAN::Config->{$k}; if (ref $v) { $CPAN::Frontend->myprint( join( "", sprintf( " %-18s\n", $k ), map {"\t$_\n"} @{$v} ) ); } else { $CPAN::Frontend->myprint(sprintf " %-18s %s\n", $k, $v); } } $CPAN::Frontend->myprint("\n"); } elsif (!CPAN::Config->edit(@o_what)) { $CPAN::Frontend->myprint(qq[Type 'o conf' to view configuration edit options\n\n]); } } elsif ($o_type eq 'debug') { my(%valid); @o_what = () if defined $o_what[0] && $o_what[0] =~ /help/i; if (@o_what) { while (@o_what) { my($what) = shift @o_what; if ( exists $CPAN::DEBUG{$what} ) { $CPAN::DEBUG |= $CPAN::DEBUG{$what}; } elsif ($what =~ /^\d/) { $CPAN::DEBUG = $what; } elsif (lc $what eq 'all') { my($max) = 0; for (values %CPAN::DEBUG) { $max += $_; } $CPAN::DEBUG = $max; } else { my($known) = 0; for (keys %CPAN::DEBUG) { next unless lc($_) eq lc($what); $CPAN::DEBUG |= $CPAN::DEBUG{$_}; $known = 1; } $CPAN::Frontend->myprint("unknown argument [$what]\n") unless $known; } } } else { $CPAN::Frontend->myprint("Valid options for debug are ". join(", ",sort(keys %CPAN::DEBUG), 'all'). qq{ or a number. Completion works on the options. }. qq{Case is ignored.\n\n}); } if ($CPAN::DEBUG) { $CPAN::Frontend->myprint("Options set for debugging:\n"); my($k,$v); for $k (sort {$CPAN::DEBUG{$a} <=> $CPAN::DEBUG{$b}} keys %CPAN::DEBUG) { $v = $CPAN::DEBUG{$k}; $CPAN::Frontend->myprint(sprintf " %-14s(%s)\n", $k, $v) if $v & $CPAN::DEBUG; } } else { $CPAN::Frontend->myprint("Debugging turned off completely.\n"); } } else { $CPAN::Frontend->myprint(qq{ Known options: conf set or get configuration variables debug set or get debugging options }); } } #-> sub CPAN::Shell::reload ; sub reload { my($self,$command,@arg) = @_; $command ||= ""; $self->debug("self[$self]command[$command]arg[@arg]") if $CPAN::DEBUG; if ($command =~ /cpan/i) { CPAN->debug("reloading the whole CPAN.pm") if $CPAN::DEBUG; my $fh = FileHandle->new($INC{'CPAN.pm'}); local($/); undef $/; $redef = 0; local($SIG{__WARN__}) = sub { if ( $_[0] =~ /Subroutine \w+ redefined/ ) { ++$redef; local($|) = 1; $CPAN::Frontend->myprint("."); return; } warn @_; }; eval <$fh>; warn $@ if $@; $CPAN::Frontend->myprint("\n$redef subroutines redefined\n"); } elsif ($command =~ /index/) { CPAN::Index->force_reload; } else { $CPAN::Frontend->myprint(qq{cpan re-evals the CPAN.pm file index re-reads the index files }); } } #-> sub CPAN::Shell::_binary_extensions ; sub _binary_extensions { my($self) = shift @_; my(@result,$module,%seen,%need,$headerdone); my $isaperl = q{perl5[._-]\\d{3}(_[0-4][0-9])?\\.tar[._-]gz$}; for $module ($self->expand('Module','/./')) { my $file = $module->cpan_file; next if $file eq "N/A"; next if $file =~ /^Contact Author/; next if $file =~ / $isaperl /xo; next unless $module->xs_file; local($|) = 1; $CPAN::Frontend->myprint("."); push @result, $module; } # print join " | ", @result; $CPAN::Frontend->myprint("\n"); return @result; } #-> sub CPAN::Shell::recompile ; sub recompile { my($self) = shift @_; my($module,@module,$cpan_file,%dist); @module = $self->_binary_extensions(); for $module (@module){ # we force now and compile later, so we # don't do it twice $cpan_file = $module->cpan_file; my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file); $pack->force; $dist{$cpan_file}++; } for $cpan_file (sort keys %dist) { $CPAN::Frontend->myprint(" CPAN: Recompiling $cpan_file\n\n"); my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file); $pack->install; $CPAN::Signal = 0; # it's tempting to reset Signal, so we can # stop a package from recompiling, # e.g. IO-1.12 when we have perl5.003_10 } } #-> sub CPAN::Shell::_u_r_common ; sub _u_r_common { my($self) = shift @_; my($what) = shift @_; CPAN->debug("self[$self] what[$what] args[@_]") if $CPAN::DEBUG; Carp::croak "Usage: \$obj->_u_r_common($what)" unless defined $what; Carp::croak "Usage: \$obj->_u_r_common(a|r|u)" unless $what =~ /^[aru]$/; my(@args) = @_; @args = '/./' unless @args; my(@result,$module,%seen,%need,$headerdone, $version_undefs,$version_zeroes); $version_undefs = $version_zeroes = 0; my $sprintf = "%-25s %9s %9s %s\n"; for $module ($self->expand('Module',@args)) { my $file = $module->cpan_file; next unless defined $file; # ?? my($latest) = $module->cpan_version; my($inst_file) = $module->inst_file; my($have); return if $CPAN::Signal; if ($inst_file){ if ($what eq "a") { $have = $module->inst_version; } elsif ($what eq "r") { $have = $module->inst_version; local($^W) = 0; if ($have eq "undef"){ $version_undefs++; } elsif ($have == 0){ $version_zeroes++; } next if $have >= $latest; # to be pedantic we should probably say: # && !($have eq "undef" && $latest ne "undef" && $latest gt ""); # to catch the case where CPAN has a version 0 and we have a version undef } elsif ($what eq "u") { next; } } else { if ($what eq "a") { next; } elsif ($what eq "r") { next; } elsif ($what eq "u") { $have = "-"; } } return if $CPAN::Signal; # this is sometimes lengthy $seen{$file} ||= 0; if ($what eq "a") { push @result, sprintf "%s %s\n", $module->id, $have; } elsif ($what eq "r") { push @result, $module->id; next if $seen{$file}++; } elsif ($what eq "u") { push @result, $module->id; next if $seen{$file}++; next if $file =~ /^Contact/; } unless ($headerdone++){ $CPAN::Frontend->myprint("\n"); $CPAN::Frontend->myprint(sprintf( $sprintf, "Package namespace", "installed", "latest", "in CPAN file" )); } $latest = substr($latest,0,8) if length($latest) > 8; $have = substr($have,0,8) if length($have) > 8; $CPAN::Frontend->myprint(sprintf $sprintf, $module->id, $have, $latest, $file); $need{$module->id}++; } unless (%need) { if ($what eq "u") { $CPAN::Frontend->myprint("No modules found for @args\n"); } elsif ($what eq "r") { $CPAN::Frontend->myprint("All modules are up to date for @args\n"); } } if ($what eq "r") { if ($version_zeroes) { my $s_has = $version_zeroes > 1 ? "s have" : " has"; $CPAN::Frontend->myprint(qq{$version_zeroes installed module$s_has }. qq{a version number of 0\n}); } if ($version_undefs) { my $s_has = $version_undefs > 1 ? "s have" : " has"; $CPAN::Frontend->myprint(qq{$version_undefs installed module$s_has no }. qq{parseable version number\n}); } } @result; } #-> sub CPAN::Shell::r ; sub r { shift->_u_r_common("r",@_); } #-> sub CPAN::Shell::u ; sub u { shift->_u_r_common("u",@_); } #-> sub CPAN::Shell::autobundle ; sub autobundle { my($self) = shift; my(@bundle) = $self->_u_r_common("a",@_); my($todir) = MM->catdir($CPAN::Config->{'cpan_home'},"Bundle"); File::Path::mkpath($todir); unless (-d $todir) { $CPAN::Frontend->myprint("Couldn't mkdir $todir for some reason\n"); return; } my($y,$m,$d) = (localtime)[5,4,3]; $y+=1900; $m++; my($c) = 0; my($me) = sprintf "Snapshot_%04d_%02d_%02d_%02d", $y, $m, $d, $c; my($to) = MM->catfile($todir,"$me.pm"); while (-f $to) { $me = sprintf "Snapshot_%04d_%02d_%02d_%02d", $y, $m, $d, ++$c; $to = MM->catfile($todir,"$me.pm"); } my($fh) = FileHandle->new(">$to") or Carp::croak "Can't open >$to: $!"; $fh->print( "package Bundle::$me;\n\n", "\$VERSION = '0.01';\n\n", "1;\n\n", "__END__\n\n", "=head1 NAME\n\n", "Bundle::$me - Snapshot of installation on ", $Config::Config{'myhostname'}, " on ", scalar(localtime), "\n\n=head1 SYNOPSIS\n\n", "perl -MCPAN -e 'install Bundle::$me'\n\n", "=head1 CONTENTS\n\n", join("\n", @bundle), "\n\n=head1 CONFIGURATION\n\n", Config->myconfig, "\n\n=head1 AUTHOR\n\n", "This Bundle has been generated automatically ", "by the autobundle routine in CPAN.pm.\n", ); $fh->close; $CPAN::Frontend->myprint("\nWrote bundle file $to\n\n"); } #-> sub CPAN::Shell::expand ; sub expand { shift; my($type,@args) = @_; my($arg,@m); for $arg (@args) { my $regex; if ($arg =~ m|^/(.*)/$|) { $regex = $1; } my $class = "CPAN::$type"; my $obj; if (defined $regex) { for $obj ( sort {$a->id cmp $b->id} $CPAN::META->all($class)) { push @m, $obj if $obj->id =~ /$regex/i or ( ( $] < 5.00303 ### provide sort of compatibility with 5.003 || $obj->can('name') ) && $obj->name =~ /$regex/i ); } } else { my($xarg) = $arg; if ( $type eq 'Bundle' ) { $xarg =~ s/^(Bundle::)?(.*)/Bundle::$2/; } if ($CPAN::META->exists($class,$xarg)) { $obj = $CPAN::META->instance($class,$xarg); } elsif ($CPAN::META->exists($class,$arg)) { $obj = $CPAN::META->instance($class,$arg); } else { next; } push @m, $obj; } } return wantarray ? @m : $m[0]; } #-> sub CPAN::Shell::format_result ; sub format_result { my($self) = shift; my($type,@args) = @_; @args = '/./' unless @args; my(@result) = $self->expand($type,@args); my $result = @result == 1 ? $result[0]->as_string : join "", map {$_->as_glimpse} @result; $result ||= "No objects of type $type found for argument @args\n"; $result; } # The only reason for this method is currently to have a reliable # debugging utility that reveals which output is going through which # channel. No, I don't like the colors ;-) sub print_ornamented { my($self,$what,$ornament) = @_; my $longest = 0; my $ornamenting = 0; # turn the colors on if ($ornamenting) { unless (defined &color) { if ($CPAN::META->has_inst("Term::ANSIColor")) { import Term::ANSIColor "color"; } else { *color = sub { return "" }; } } my $line; for $line (split /\n/, $what) { $longest = length($line) if length($line) > $longest; } my $sprintf = "%-" . $longest . "s"; while ($what){ $what =~ s/(.*\n?)//m; my $line = $1; last unless $line; my($nl) = chomp $line ? "\n" : ""; # print "line[$line]ornament[$ornament]sprintf[$sprintf]\n"; print color($ornament), sprintf($sprintf,$line), color("reset"), $nl; } } else { print $what; } } sub myprint { my($self,$what) = @_; $self->print_ornamented($what, 'bold blue on_yellow'); } sub myexit { my($self,$what) = @_; $self->myprint($what); exit; } sub mywarn { my($self,$what) = @_; $self->print_ornamented($what, 'bold red on_yellow'); } sub myconfess { my($self,$what) = @_; $self->print_ornamented($what, 'bold red on_white'); Carp::confess "died"; } sub mydie { my($self,$what) = @_; $self->print_ornamented($what, 'bold red on_white'); die "\n"; } #-> sub CPAN::Shell::rematein ; # RE-adme||MA-ke||TE-st||IN-stall sub rematein { shift; my($meth,@some) = @_; my $pragma = ""; if ($meth eq 'force') { $pragma = $meth; $meth = shift @some; } CPAN->debug("pragma[$pragma]meth[$meth] some[@some]") if $CPAN::DEBUG; my($s,@s); foreach $s (@some) { my $obj; if (ref $s) { $obj = $s; } elsif ($s =~ m|/|) { # looks like a file $obj = $CPAN::META->instance('CPAN::Distribution',$s); } elsif ($s =~ m|^Bundle::|) { $CPAN::META->{'CPAN::Queue'}{$s} ||= CPAN::Queue->new($s); $obj = $CPAN::META->instance('CPAN::Bundle',$s); } else { $CPAN::META->{'CPAN::Queue'}{$s} ||= CPAN::Queue->new($s); $obj = $CPAN::META->instance('CPAN::Module',$s) if $CPAN::META->exists('CPAN::Module',$s); } if (ref $obj) { CPAN->debug( qq{pragma[$pragma] meth[$meth] obj[$obj] as_string\[}. $obj->as_string. qq{\]} ) if $CPAN::DEBUG; $obj->$pragma() if $pragma && ($] < 5.00303 || $obj->can($pragma)); ### ### compatibility ### with ### 5.003 if ($]>=5.00303 && $obj->can('called_for')) { $obj->called_for($s); } $obj->$meth(); } elsif ($CPAN::META->exists('CPAN::Author',$s)) { $obj = $CPAN::META->instance('CPAN::Author',$s); $CPAN::Frontend->myprint( join "", "Don't be silly, you can't $meth ", $obj->fullname, " ;-)\n" ); } else { $CPAN::Frontend->myprint(qq{Warning: Cannot $meth $s, don\'t know what it is. Try the command i /$s/ to find objects with similar identifiers. }); } } } #-> sub CPAN::Shell::force ; sub force { shift->rematein('force',@_); } #-> sub CPAN::Shell::get ; sub get { shift->rematein('get',@_); } #-> sub CPAN::Shell::readme ; sub readme { shift->rematein('readme',@_); } #-> sub CPAN::Shell::make ; sub make { shift->rematein('make',@_); } #-> sub CPAN::Shell::test ; sub test { shift->rematein('test',@_); } #-> sub CPAN::Shell::install ; sub install { shift->rematein('install',@_); } #-> sub CPAN::Shell::clean ; sub clean { shift->rematein('clean',@_); } #-> sub CPAN::Shell::look ; sub look { shift->rematein('look',@_); } package CPAN::FTP; #-> sub CPAN::FTP::ftp_get ; sub ftp_get { my($class,$host,$dir,$file,$target) = @_; $class->debug( qq[Going to fetch file [$file] from dir [$dir] on host [$host] as local [$target]\n] ) if $CPAN::DEBUG; my $ftp = Net::FTP->new($host); return 0 unless defined $ftp; $ftp->debug(1) if $CPAN::DEBUG{'FTP'} & $CPAN::DEBUG; $class->debug(qq[Going to ->login("anonymous","$Config::Config{'cf_email'}")\n]); unless ( $ftp->login("anonymous",$Config::Config{'cf_email'}) ){ warn "Couldn't login on $host"; return; } unless ( $ftp->cwd($dir) ){ warn "Couldn't cwd $dir"; return; } $ftp->binary; $class->debug(qq[Going to ->get("$file","$target")\n]) if $CPAN::DEBUG; unless ( $ftp->get($file,$target) ){ warn "Couldn't fetch $file from $host\n"; return; } $ftp->quit; # it's ok if this fails return 1; } # If more accuracy is wanted/needed, Chris Leach sent me this patch... # leach,> *** /install/perl/live/lib/CPAN.pm- Wed Sep 24 13:08:48 1997 # leach,> --- /tmp/cp Wed Sep 24 13:26:40 1997 # leach,> *************** # leach,> *** 1562,1567 **** # leach,> --- 1562,1580 ---- # leach,> return 1 if substr($url,0,4) eq "file"; # leach,> return 1 unless $url =~ m|://([^/]+)|; # leach,> my $host = $1; # leach,> + my $proxy = $CPAN::Config->{'http_proxy'} || $ENV{'http_proxy'}; # leach,> + if ($proxy) { # leach,> + $proxy =~ m|://([^/:]+)|; # leach,> + $proxy = $1; # leach,> + my $noproxy = $CPAN::Config->{'no_proxy'} || $ENV{'no_proxy'}; # leach,> + if ($noproxy) { # leach,> + if ($host !~ /$noproxy$/) { # leach,> + $host = $proxy; # leach,> + } # leach,> + } else { # leach,> + $host = $proxy; # leach,> + } # leach,> + } # leach,> require Net::Ping; # leach,> return 1 unless $Net::Ping::VERSION >= 2; # leach,> my $p; # this is quite optimistic and returns one on several occasions where # inappropriate. But this does no harm. It would do harm if we were # too pessimistic (as I was before the http_proxy sub is_reachable { my($self,$url) = @_; return 1; # we can't simply roll our own, firewalls may break ping return 0 unless $url; return 1 if substr($url,0,4) eq "file"; return 1 unless $url =~ m|^(\w+)://([^/]+)|; my $proxytype = $1 . "_proxy"; # ftp_proxy or http_proxy my $host = $2; return 1 if $CPAN::Config->{$proxytype} || $ENV{$proxytype}; require Net::Ping; return 1 unless $Net::Ping::VERSION >= 2; my $p; # 1.3101 had it different: only if the first eval raised an # exception we tried it with TCP. Now we are happy if icmp wins # the order and return, we don't even check for $@. Thanks to # thayer@uis.edu for the suggestion. eval {$p = Net::Ping->new("icmp");}; return 1 if $p && ref($p) && $p->ping($host, 10); eval {$p = Net::Ping->new("tcp");}; $CPAN::Frontend->mydie($@) if $@; return $p->ping($host, 10); } #-> sub CPAN::FTP::localize ; # sorry for the ugly code here, I'll clean it up as soon as Net::FTP # is in the core sub localize { my($self,$file,$aslocal,$force) = @_; $force ||= 0; Carp::croak "Usage: ->localize(cpan_file,as_local_file[,$force])" unless defined $aslocal; $self->debug("file[$file] aslocal[$aslocal] force[$force]") if $CPAN::DEBUG; return $aslocal if -f $aslocal && -r _ && !($force & 1); my($restore) = 0; if (-f $aslocal){ rename $aslocal, "$aslocal.bak"; $restore++; } my($aslocal_dir) = File::Basename::dirname($aslocal); File::Path::mkpath($aslocal_dir); $CPAN::Frontend->mywarn(qq{Warning: You are not allowed to write into }. qq{directory "$aslocal_dir". I\'ll continue, but if you encounter problems, they may be due to insufficient permissions.\n}) unless -w $aslocal_dir; # Inheritance is not easier to manage than a few if/else branches if ($CPAN::META->has_inst('LWP')) { require LWP::UserAgent; unless ($Ua) { $Ua = LWP::UserAgent->new; my($var); $Ua->proxy('ftp', $var) if $var = $CPAN::Config->{'ftp_proxy'} || $ENV{'ftp_proxy'}; $Ua->proxy('http', $var) if $var = $CPAN::Config->{'http_proxy'} || $ENV{'http_proxy'}; $Ua->no_proxy($var) if $var = $CPAN::Config->{'no_proxy'} || $ENV{'no_proxy'}; } } # Try the list of urls for each single object. We keep a record # where we did get a file from my(@reordered,$last); $CPAN::Config->{urllist} ||= []; $last = $#{$CPAN::Config->{urllist}}; if ($force & 2) { # local cpans probably out of date, don't reorder @reordered = (0..$last); } else { @reordered = sort { (substr($CPAN::Config->{urllist}[$b],0,4) eq "file") <=> (substr($CPAN::Config->{urllist}[$a],0,4) eq "file") or defined($Thesite) and ($b == $Thesite) <=> ($a == $Thesite) } 0..$last; # ((grep { substr($CPAN::Config->{urllist}[$_],0,4) # eq "file" } 0..$last), # (grep { substr($CPAN::Config->{urllist}[$_],0,4) # ne "file" } 0..$last)); } my($level,@levels); if ($Themethod) { @levels = ($Themethod, grep {$_ ne $Themethod} qw/easy hard hardest/); } else { @levels = qw/easy hard hardest/; } for $level (@levels) { my $method = "host$level"; my @host_seq = $level eq "easy" ? @reordered : 0..$last; # reordered has CDROM up front @host_seq = (0) unless @host_seq; my $ret = $self->$method(\@host_seq,$file,$aslocal); if ($ret) { $Themethod = $level; $self->debug("level[$level]") if $CPAN::DEBUG; return $ret; } } my(@mess); push @mess, qq{Please check, if the URLs I found in your configuration file \(}. join(", ", @{$CPAN::Config->{urllist}}). qq{\) are valid. The urllist can be edited.}, qq{E.g. with ``o conf urllist push ftp://myurl/''}; $CPAN::Frontend->myprint(Text::Wrap::wrap("","",@mess). "\n\n"); sleep 2; $CPAN::Frontend->myprint("Cannot fetch $file\n\n"); if ($restore) { rename "$aslocal.bak", $aslocal; $CPAN::Frontend->myprint("Trying to get away with old file:\n" . $self->ls($aslocal)); return $aslocal; } return; } sub hosteasy { my($self,$host_seq,$file,$aslocal) = @_; my($i); HOSTEASY: for $i (@$host_seq) { my $url = $CPAN::Config->{urllist}[$i] || $CPAN::Defaultsite; unless ($self->is_reachable($url)) { $CPAN::Frontend->myprint("Skipping $url (seems to be not reachable)\n"); sleep 2; next; } $url .= "/" unless substr($url,-1) eq "/"; $url .= $file; $self->debug("localizing perlish[$url]") if $CPAN::DEBUG; if ($url =~ /^file:/) { my $l; if ($CPAN::META->has_inst('LWP')) { require URI::URL; my $u = URI::URL->new($url); $l = $u->path; } else { # works only on Unix, is poorly constructed, but # hopefully better than nothing. # RFC 1738 says fileurl BNF is # fileurl = "file://" [ host | "localhost" ] "/" fpath # Thanks to "Mark D. Baushke" for # the code ($l = $url) =~ s,^file://[^/]+,,; # discard the host part $l =~ s/^file://; # assume they meant file://localhost } if ( -f $l && -r _) { $Thesite = $i; return $l; } # Maybe mirror has compressed it? if (-f "$l.gz") { $self->debug("found compressed $l.gz") if $CPAN::DEBUG; CPAN::Tarzip->gunzip("$l.gz", $aslocal); if ( -f $aslocal) { $Thesite = $i; return $aslocal; } } } if ($CPAN::META->has_inst('LWP')) { $CPAN::Frontend->myprint("Fetching with LWP: $url "); my $res = $Ua->mirror($url, $aslocal); if ($res->is_success) { $Thesite = $i; return $aslocal; } elsif ($url !~ /\.gz$/) { my $gzurl = "$url.gz"; $CPAN::Frontend->myprint("Fetching with LWP: $gzurl "); $res = $Ua->mirror($gzurl, "$aslocal.gz"); if ($res->is_success && CPAN::Tarzip->gunzip("$aslocal.gz",$aslocal) ) { $Thesite = $i; return $aslocal; } else { # next HOSTEASY ; } } else { # Alan Burlison informed me that in firewall envs Net::FTP # can still succeed where LWP fails. So we do not skip # Net::FTP anymore when LWP is available. # next HOSTEASY ; } } else { $self->debug("LWP not installed") if $CPAN::DEBUG; } if ($url =~ m|^ftp://(.*?)/(.*)/(.*)|) { # that's the nice and easy way thanks to Graham my($host,$dir,$getfile) = ($1,$2,$3); if ($CPAN::META->has_inst('Net::FTP')) { $dir =~ s|/+|/|g; $CPAN::Frontend->myprint("Fetching with Net::FTP: $url "); $self->debug("getfile[$getfile]dir[$dir]host[$host]" . "aslocal[$aslocal]") if $CPAN::DEBUG; if (CPAN::FTP->ftp_get($host,$dir,$getfile,$aslocal)) { $Thesite = $i; return $aslocal; } if ($aslocal !~ /\.gz$/) { my $gz = "$aslocal.gz"; $CPAN::Frontend->myprint("Fetching with Net::FTP $url.gz "); if (CPAN::FTP->ftp_get($host, $dir, "$getfile.gz", $gz) && CPAN::Tarzip->gunzip($gz,$aslocal) ){ $Thesite = $i; return $aslocal; } } # next HOSTEASY; } } } } sub hosthard { my($self,$host_seq,$file,$aslocal) = @_; # Came back if Net::FTP couldn't establish connection (or # failed otherwise) Maybe they are behind a firewall, but they # gave us a socksified (or other) ftp program... my($i); my($aslocal_dir) = File::Basename::dirname($aslocal); File::Path::mkpath($aslocal_dir); HOSTHARD: for $i (@$host_seq) { my $url = $CPAN::Config->{urllist}[$i] || $CPAN::Defaultsite; unless ($self->is_reachable($url)) { $CPAN::Frontend->myprint("Skipping $url (not reachable)\n"); next; } $url .= "/" unless substr($url,-1) eq "/"; $url .= $file; my($proto,$host,$dir,$getfile); # Courtesy Mark Conty mark_conty@cargill.com change from # if ($url =~ m|^ftp://(.*?)/(.*)/(.*)|) { # to if ($url =~ m|^([^:]+)://(.*?)/(.*)/(.*)|) { # proto not yet used ($proto,$host,$dir,$getfile) = ($1,$2,$3,$4); } else { next HOSTHARD; # who said, we could ftp anything except ftp? } $self->debug("localizing funkyftpwise[$url]") if $CPAN::DEBUG; my($f,$funkyftp); for $f ('lynx','ncftp') { next unless exists $CPAN::Config->{$f}; $funkyftp = $CPAN::Config->{$f}; next unless defined $funkyftp; next if $funkyftp =~ /^\s*$/; my($want_compressed); my $aslocal_uncompressed; ($aslocal_uncompressed = $aslocal) =~ s/\.gz//; my($source_switch) = ""; $source_switch = "-source" if $funkyftp =~ /\blynx$/; $source_switch = "-c" if $funkyftp =~ /\bncftp$/; $CPAN::Frontend->myprint( qq{ Trying with "$funkyftp $source_switch" to get $url }); my($system) = "$funkyftp $source_switch '$url' > ". "$aslocal_uncompressed"; $self->debug("system[$system]") if $CPAN::DEBUG; my($wstatus); if (($wstatus = system($system)) == 0 && -s $aslocal_uncompressed # lynx returns 0 on my # system even if it fails ) { if ($aslocal_uncompressed ne $aslocal) { # test gzip integrity if ( CPAN::Tarzip->gtest($aslocal_uncompressed) ) { rename $aslocal_uncompressed, $aslocal; } else { CPAN::Tarzip->gzip($aslocal_uncompressed, "$aslocal_uncompressed.gz"); } $Thesite = $i; return $aslocal; } } elsif ($url !~ /\.gz$/) { my $gz = "$aslocal.gz"; my $gzurl = "$url.gz"; $CPAN::Frontend->myprint( qq{ Trying with "$funkyftp $source_switch" to get $url.gz }); my($system) = "$funkyftp $source_switch '$url.gz' > ". "$aslocal_uncompressed.gz"; $self->debug("system[$system]") if $CPAN::DEBUG; my($wstatus); if (($wstatus = system($system)) == 0 && -s "$aslocal_uncompressed.gz" ) { # test gzip integrity if (CPAN::Tarzip->gtest("$aslocal_uncompressed.gz")) { CPAN::Tarzip->gunzip("$aslocal_uncompressed.gz", $aslocal); } else { rename $aslocal_uncompressed, $aslocal; } #line 1739 $Thesite = $i; return $aslocal; } } else { my $estatus = $wstatus >> 8; my $size = -f $aslocal ? ", left\n$aslocal with size ".-s _ : ""; $CPAN::Frontend->myprint(qq{ System call "$system" returned status $estatus (wstat $wstatus)$size }); } } } } sub hosthardest { my($self,$host_seq,$file,$aslocal) = @_; my($i); my($aslocal_dir) = File::Basename::dirname($aslocal); File::Path::mkpath($aslocal_dir); HOSTHARDEST: for $i (@$host_seq) { unless (length $CPAN::Config->{'ftp'}) { $CPAN::Frontend->myprint("No external ftp command available\n\n"); last HOSTHARDEST; } my $url = $CPAN::Config->{urllist}[$i] || $CPAN::Defaultsite; unless ($self->is_reachable($url)) { $CPAN::Frontend->myprint("Skipping $url (not reachable)\n"); next; } $url .= "/" unless substr($url,-1) eq "/"; $url .= $file; $self->debug("localizing ftpwise[$url]") if $CPAN::DEBUG; unless ($url =~ m|^ftp://(.*?)/(.*)/(.*)|) { next; } my($host,$dir,$getfile) = ($1,$2,$3); my($netrcfile,$fh); my $timestamp = 0; my($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,$atime,$mtime, $ctime,$blksize,$blocks) = stat($aslocal); $timestamp = $mtime ||= 0; my($netrc) = CPAN::FTP::netrc->new; my($verbose) = $CPAN::DEBUG{'FTP'} & $CPAN::DEBUG ? " -v" : ""; my $targetfile = File::Basename::basename($aslocal); my(@dialog); push( @dialog, "lcd $aslocal_dir", "cd /", map("cd $_", split "/", $dir), # RFC 1738 "bin", "get $getfile $targetfile", "quit" ); if (! $netrc->netrc) { CPAN->debug("No ~/.netrc file found") if $CPAN::DEBUG; } elsif ($netrc->hasdefault || $netrc->contains($host)) { CPAN->debug(sprintf("hasdef[%d]cont($host)[%d]", $netrc->hasdefault, $netrc->contains($host))) if $CPAN::DEBUG; if ($netrc->protected) { $CPAN::Frontend->myprint(qq{ Trying with external ftp to get $url As this requires some features that are not thoroughly tested, we\'re not sure, that we get it right.... } ); $self->talk_ftp("$CPAN::Config->{'ftp'}$verbose $host", @dialog); ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($aslocal); $mtime ||= 0; if ($mtime > $timestamp) { $CPAN::Frontend->myprint("GOT $aslocal\n"); $Thesite = $i; return $aslocal; } else { $CPAN::Frontend->myprint("Hmm... Still failed!\n"); } } else { $CPAN::Frontend->mywarn(qq{Your $netrcfile is not }. qq{correctly protected.\n}); } } else { $CPAN::Frontend->mywarn("Your ~/.netrc neither contains $host nor does it have a default entry\n"); } # OK, they don't have a valid ~/.netrc. Use 'ftp -n' # then and login manually to host, using e-mail as # password. $CPAN::Frontend->myprint(qq{Issuing "$CPAN::Config->{'ftp'}$verbose -n"\n}); unshift( @dialog, "open $host", "user anonymous $Config::Config{'cf_email'}" ); $self->talk_ftp("$CPAN::Config->{'ftp'}$verbose -n", @dialog); ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($aslocal); $mtime ||= 0; if ($mtime > $timestamp) { $CPAN::Frontend->myprint("GOT $aslocal\n"); $Thesite = $i; return $aslocal; } else { $CPAN::Frontend->myprint("Bad luck... Still failed!\n"); } $CPAN::Frontend->myprint("Can't access URL $url.\n\n"); sleep 2; } } sub talk_ftp { my($self,$command,@dialog) = @_; my $fh = FileHandle->new; $fh->open("|$command") or die "Couldn't open ftp: $!"; foreach (@dialog) { $fh->print("$_\n") } $fh->close; # Wait for process to complete my $wstatus = $?; my $estatus = $wstatus >> 8; $CPAN::Frontend->myprint(qq{ Subprocess "|$command" returned status $estatus (wstat $wstatus) }) if $wstatus; } # find2perl needs modularization, too, all the following is stolen # from there # CPAN::FTP::ls sub ls { my($self,$name) = @_; my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$sizemm, $atime,$mtime,$ctime,$blksize,$blocks) = lstat($name); my($perms,%user,%group); my $pname = $name; if ($blocks) { $blocks = int(($blocks + 1) / 2); } else { $blocks = int(($sizemm + 1023) / 1024); } if (-f _) { $perms = '-'; } elsif (-d _) { $perms = 'd'; } elsif (-c _) { $perms = 'c'; $sizemm = &sizemm; } elsif (-b _) { $perms = 'b'; $sizemm = &sizemm; } elsif (-p _) { $perms = 'p'; } elsif (-S _) { $perms = 's'; } else { $perms = 'l'; $pname .= ' -> ' . readlink($_); } my(@rwx) = ('---','--x','-w-','-wx','r--','r-x','rw-','rwx'); my(@moname) = qw(Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec); my $tmpmode = $mode; my $tmp = $rwx[$tmpmode & 7]; $tmpmode >>= 3; $tmp = $rwx[$tmpmode & 7] . $tmp; $tmpmode >>= 3; $tmp = $rwx[$tmpmode & 7] . $tmp; substr($tmp,2,1) =~ tr/-x/Ss/ if -u _; substr($tmp,5,1) =~ tr/-x/Ss/ if -g _; substr($tmp,8,1) =~ tr/-x/Tt/ if -k _; $perms .= $tmp; my $user = $user{$uid} || $uid; # too lazy to implement lookup my $group = $group{$gid} || $gid; my($sec,$min,$hour,$mday,$mon,$year) = localtime($mtime); my($timeyear); my($moname) = $moname[$mon]; if (-M _ > 365.25 / 2) { $timeyear = $year + 1900; } else { $timeyear = sprintf("%02d:%02d", $hour, $min); } sprintf "%5lu %4ld %-10s %2d %-8s %-8s %8s %s %2d %5s %s\n", $ino, $blocks, $perms, $nlink, $user, $group, $sizemm, $moname, $mday, $timeyear, $pname; } package CPAN::FTP::netrc; sub new { my($class) = @_; my $file = MM->catfile($ENV{HOME},".netrc"); my($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($file); $mode ||= 0; my $protected = 0; my($fh,@machines,$hasdefault); $hasdefault = 0; $fh = FileHandle->new or die "Could not create a filehandle"; if($fh->open($file)){ $protected = ($mode & 077) == 0; local($/) = ""; NETRC: while (<$fh>) { my(@tokens) = split " ", $_; TOKEN: while (@tokens) { my($t) = shift @tokens; if ($t eq "default"){ $hasdefault++; last NETRC; } last TOKEN if $t eq "macdef"; if ($t eq "machine") { push @machines, shift @tokens; } } } } else { $file = $hasdefault = $protected = ""; } bless { 'mach' => [@machines], 'netrc' => $file, 'hasdefault' => $hasdefault, 'protected' => $protected, }, $class; } sub hasdefault { shift->{'hasdefault'} } sub netrc { shift->{'netrc'} } sub protected { shift->{'protected'} } sub contains { my($self,$mach) = @_; for ( @{$self->{'mach'}} ) { return 1 if $_ eq $mach; } return 0; } package CPAN::Complete; #-> sub CPAN::Complete::cpl ; sub cpl { my($word,$line,$pos) = @_; $word ||= ""; $line ||= ""; $pos ||= 0; CPAN->debug("word [$word] line[$line] pos[$pos]") if $CPAN::DEBUG; $line =~ s/^\s*//; if ($line =~ s/^(force\s*)//) { $pos -= length($1); } my @return; if ($pos == 0) { @return = grep( /^$word/, sort qw( ! a b d h i m o q r u autobundle clean make test install force reload look ) ); } elsif ( $line !~ /^[\!abdhimorutl]/ ) { @return = (); } elsif ($line =~ /^a\s/) { @return = cplx('CPAN::Author',$word); } elsif ($line =~ /^b\s/) { @return = cplx('CPAN::Bundle',$word); } elsif ($line =~ /^d\s/) { @return = cplx('CPAN::Distribution',$word); } elsif ($line =~ /^([mru]|make|clean|test|install|readme|look)\s/ ) { @return = (cplx('CPAN::Module',$word),cplx('CPAN::Bundle',$word)); } elsif ($line =~ /^i\s/) { @return = cpl_any($word); } elsif ($line =~ /^reload\s/) { @return = cpl_reload($word,$line,$pos); } elsif ($line =~ /^o\s/) { @return = cpl_option($word,$line,$pos); } else { @return = (); } return @return; } #-> sub CPAN::Complete::cplx ; sub cplx { my($class, $word) = @_; grep /^\Q$word\E/, map { $_->id } $CPAN::META->all($class); } #-> sub CPAN::Complete::cpl_any ; sub cpl_any { my($word) = shift; return ( cplx('CPAN::Author',$word), cplx('CPAN::Bundle',$word), cplx('CPAN::Distribution',$word), cplx('CPAN::Module',$word), ); } #-> sub CPAN::Complete::cpl_reload ; sub cpl_reload { my($word,$line,$pos) = @_; $word ||= ""; my(@words) = split " ", $line; CPAN->debug("word[$word] line[$line] pos[$pos]") if $CPAN::DEBUG; my(@ok) = qw(cpan index); return @ok if @words == 1; return grep /^\Q$word\E/, @ok if @words == 2 && $word; } #-> sub CPAN::Complete::cpl_option ; sub cpl_option { my($word,$line,$pos) = @_; $word ||= ""; my(@words) = split " ", $line; CPAN->debug("word[$word] line[$line] pos[$pos]") if $CPAN::DEBUG; my(@ok) = qw(conf debug); return @ok if @words == 1; return grep /^\Q$word\E/, @ok if @words == 2 && length($word); if (0) { } elsif ($words[1] eq 'index') { return (); } elsif ($words[1] eq 'conf') { return CPAN::Config::cpl(@_); } elsif ($words[1] eq 'debug') { return sort grep /^\Q$word\E/, sort keys %CPAN::DEBUG, 'all'; } } package CPAN::Index; #-> sub CPAN::Index::force_reload ; sub force_reload { my($class) = @_; $CPAN::Index::last_time = 0; $class->reload(1); } #-> sub CPAN::Index::reload ; sub reload { my($cl,$force) = @_; my $time = time; # XXX check if a newer one is available. (We currently read it # from time to time) for ($CPAN::Config->{index_expire}) { $_ = 0.001 unless $_ > 0.001; } return if $last_time + $CPAN::Config->{index_expire}*86400 > $time and ! $force; my($debug,$t2); $last_time = $time; my $needshort = $^O eq "dos"; $cl->rd_authindex($cl->reload_x( "authors/01mailrc.txt.gz", $needshort ? "01mailrc.gz" : "", $force)); $t2 = time; $debug = "timing reading 01[".($t2 - $time)."]"; $time = $t2; return if $CPAN::Signal; # this is sometimes lengthy $cl->rd_modpacks($cl->reload_x( "modules/02packages.details.txt.gz", $needshort ? "02packag.gz" : "", $force)); $t2 = time; $debug .= "02[".($t2 - $time)."]"; $time = $t2; return if $CPAN::Signal; # this is sometimes lengthy $cl->rd_modlist($cl->reload_x( "modules/03modlist.data.gz", $needshort ? "03mlist.gz" : "", $force)); $t2 = time; $debug .= "03[".($t2 - $time)."]"; $time = $t2; CPAN->debug($debug) if $CPAN::DEBUG; } #-> sub CPAN::Index::reload_x ; sub reload_x { my($cl,$wanted,$localname,$force) = @_; $force |= 2; # means we're dealing with an index here CPAN::Config->load; # we should guarantee loading wherever we rely # on Config XXX $localname ||= $wanted; my $abs_wanted = MM->catfile($CPAN::Config->{'keep_source_where'}, $localname); if ( -f $abs_wanted && -M $abs_wanted < $CPAN::Config->{'index_expire'} && !($force & 1) ) { my $s = $CPAN::Config->{'index_expire'} == 1 ? "" : "s"; $cl->debug(qq{$abs_wanted younger than $CPAN::Config->{'index_expire'} }. qq{day$s. I\'ll use that.}); return $abs_wanted; } else { $force |= 1; # means we're quite serious about it. } return CPAN::FTP->localize($wanted,$abs_wanted,$force); } #-> sub CPAN::Index::rd_authindex ; sub rd_authindex { my($cl,$index_target) = @_; return unless defined $index_target; $CPAN::Frontend->myprint("Going to read $index_target\n"); # my $fh = CPAN::Tarzip->TIEHANDLE($index_target); # while ($_ = $fh->READLINE) { # no strict 'refs'; local(*FH); tie *FH, CPAN::Tarzip, $index_target; local($/) = "\n"; while () { chomp; my($userid,$fullname,$email) = /alias\s+(\S+)\s+\"([^\"\<]+)\s+<([^\>]+)\>\"/; next unless $userid && $fullname && $email; # instantiate an author object my $userobj = $CPAN::META->instance('CPAN::Author',$userid); $userobj->set('FULLNAME' => $fullname, 'EMAIL' => $email); return if $CPAN::Signal; } } sub userid { my($self,$dist) = @_; $dist = $self->{'id'} unless defined $dist; my($ret) = $dist =~ m|(?:\w/\w\w/)?([^/]+)/|; $ret; } #-> sub CPAN::Index::rd_modpacks ; sub rd_modpacks { my($cl,$index_target) = @_; return unless defined $index_target; $CPAN::Frontend->myprint("Going to read $index_target\n"); my $fh = CPAN::Tarzip->TIEHANDLE($index_target); local($/) = "\n"; while ($_ = $fh->READLINE) { last if /^\s*$/; } while ($_ = $fh->READLINE) { chomp; my($mod,$version,$dist) = split; ### $version =~ s/^\+//; # if it is a bundle, instatiate a bundle object my($bundle,$id,$userid); if ($mod eq 'CPAN' && ! ( $CPAN::META->exists('CPAN::Queue','Bundle::CPAN') || $CPAN::META->exists('CPAN::Queue','CPAN') ) ) { local($^W)= 0; if ($version > $CPAN::VERSION){ $CPAN::Frontend->myprint(qq{ There\'s a new CPAN.pm version (v$version) available! You might want to try install Bundle::CPAN reload cpan without quitting the current session. It should be a seamless upgrade while we are running... }); sleep 2; $CPAN::Frontend->myprint(qq{\n}); } last if $CPAN::Signal; } elsif ($mod =~ /^Bundle::(.*)/) { $bundle = $1; } if ($bundle){ $id = $CPAN::META->instance('CPAN::Bundle',$mod); # Let's make it a module too, because bundles have so much # in common with modules $CPAN::META->instance('CPAN::Module',$mod); # This "next" makes us faster but if the job is running long, we ignore # rereads which is bad. So we have to be a bit slower again. # } elsif ($CPAN::META->exists('CPAN::Module',$mod)) { # next; } else { # instantiate a module object $id = $CPAN::META->instance('CPAN::Module',$mod); } if ($id->cpan_file ne $dist){ $userid = $cl->userid($dist); $id->set( 'CPAN_USERID' => $userid, 'CPAN_VERSION' => $version, 'CPAN_FILE' => $dist ); } # instantiate a distribution object unless ($CPAN::META->exists('CPAN::Distribution',$dist)) { $CPAN::META->instance( 'CPAN::Distribution' => $dist )->set( 'CPAN_USERID' => $userid ); } return if $CPAN::Signal; } undef $fh; } #-> sub CPAN::Index::rd_modlist ; sub rd_modlist { my($cl,$index_target) = @_; return unless defined $index_target; $CPAN::Frontend->myprint("Going to read $index_target\n"); my $fh = CPAN::Tarzip->TIEHANDLE($index_target); my @eval; local($/) = "\n"; while ($_ = $fh->READLINE) { if (/^Date:\s+(.*)/){ return if $date_of_03 eq $1; ($date_of_03) = $1; } last if /^\s*$/; } push @eval, $_ while $_ = $fh->READLINE; undef $fh; push @eval, q{CPAN::Modulelist->data;}; local($^W) = 0; my($comp) = Safe->new("CPAN::Safe1"); my($eval) = join("", @eval); my $ret = $comp->reval($eval); Carp::confess($@) if $@; return if $CPAN::Signal; for (keys %$ret) { my $obj = $CPAN::META->instance(CPAN::Module,$_); $obj->set(%{$ret->{$_}}); return if $CPAN::Signal; } } package CPAN::InfoObj; #-> sub CPAN::InfoObj::new ; sub new { my $this = bless {}, shift; %$this = @_; $this } #-> sub CPAN::InfoObj::set ; sub set { my($self,%att) = @_; my(%oldatt) = %$self; %$self = (%oldatt, %att); } #-> sub CPAN::InfoObj::id ; sub id { shift->{'ID'} } #-> sub CPAN::InfoObj::as_glimpse ; sub as_glimpse { my($self) = @_; my(@m); my $class = ref($self); $class =~ s/^CPAN:://; push @m, sprintf "%-15s %s\n", $class, $self->{ID}; join "", @m; } #-> sub CPAN::InfoObj::as_string ; sub as_string { my($self) = @_; my(@m); my $class = ref($self); $class =~ s/^CPAN:://; push @m, $class, " id = $self->{ID}\n"; for (sort keys %$self) { next if $_ eq 'ID'; my $extra = ""; if ($_ eq "CPAN_USERID") { $extra .= " (".$self->author; my $email; # old perls! if ($email = $CPAN::META->instance(CPAN::Author, $self->{$_} )->email) { $extra .= " <$email>"; } else { $extra .= " "; } $extra .= ")"; } if (ref($self->{$_}) eq "ARRAY") { # language interface? XXX push @m, sprintf " %-12s %s%s\n", $_, "@{$self->{$_}}", $extra; } else { push @m, sprintf " %-12s %s%s\n", $_, $self->{$_}, $extra; } } join "", @m, "\n"; } #-> sub CPAN::InfoObj::author ; sub author { my($self) = @_; $CPAN::META->instance(CPAN::Author,$self->{CPAN_USERID})->fullname; } package CPAN::Author; #-> sub CPAN::Author::as_glimpse ; sub as_glimpse { my($self) = @_; my(@m); my $class = ref($self); $class =~ s/^CPAN:://; push @m, sprintf "%-15s %s (%s)\n", $class, $self->{ID}, $self->fullname; join "", @m; } # Dead code, I would have liked to have,,, but it was never reached,,, #sub make { # my($self) = @_; # return "Don't be silly, you can't make $self->{FULLNAME} ;-)\n"; #} #-> sub CPAN::Author::fullname ; sub fullname { shift->{'FULLNAME'} } *name = \&fullname; #-> sub CPAN::Author::email ; sub email { shift->{'EMAIL'} } package CPAN::Distribution; #-> sub CPAN::Distribution::called_for ; sub called_for { my($self,$id) = @_; $self->{'CALLED_FOR'} = $id if defined $id; return $self->{'CALLED_FOR'}; } #-> sub CPAN::Distribution::get ; sub get { my($self) = @_; EXCUSE: { my @e; exists $self->{'build_dir'} and push @e, "Unwrapped into directory $self->{'build_dir'}"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } my($local_file); my($local_wanted) = MM->catfile( $CPAN::Config->{keep_source_where}, "authors", "id", split("/",$self->{ID}) ); $self->debug("Doing localize") if $CPAN::DEBUG; $local_file = CPAN::FTP->localize("authors/id/$self->{ID}", $local_wanted) or $CPAN::Frontend->mydie("Giving up on '$local_wanted'\n"); $self->{localfile} = $local_file; my $builddir = $CPAN::META->{cachemgr}->dir; $self->debug("doing chdir $builddir") if $CPAN::DEBUG; chdir $builddir or Carp::croak("Couldn't chdir $builddir: $!"); my $packagedir; $self->debug("local_file[$local_file]") if $CPAN::DEBUG; if ($CPAN::META->has_inst('MD5')) { $self->debug("MD5 is installed, verifying"); $self->verifyMD5; } else { $self->debug("MD5 is NOT installed"); } $self->debug("Removing tmp") if $CPAN::DEBUG; File::Path::rmtree("tmp"); mkdir "tmp", 0755 or Carp::croak "Couldn't mkdir tmp: $!"; chdir "tmp"; $self->debug("Changed directory to tmp") if $CPAN::DEBUG; if (! $local_file) { Carp::croak "bad download, can't do anything :-(\n"; } elsif ($local_file =~ /(\.tar\.(gz|Z)|\.tgz)$/i){ $self->untar_me($local_file); } elsif ( $local_file =~ /\.zip$/i ) { $self->unzip_me($local_file); } elsif ( $local_file =~ /\.pm\.(gz|Z)$/) { $self->pm2dir_me($local_file); } else { $self->{archived} = "NO"; } chdir ".."; if ($self->{archived} ne 'NO') { chdir "tmp"; # Let's check if the package has its own directory. my $dh = DirHandle->new(".") or Carp::croak("Couldn't opendir .: $!"); my @readdir = grep $_ !~ /^\.\.?$/, $dh->read; ### MAC?? $dh->close; my ($distdir,$packagedir); if (@readdir == 1 && -d $readdir[0]) { $distdir = $readdir[0]; $packagedir = MM->catdir($builddir,$distdir); -d $packagedir and $CPAN::Frontend->myprint("Removing previously used $packagedir\n"); File::Path::rmtree($packagedir); rename($distdir,$packagedir) or Carp::confess("Couldn't rename $distdir to $packagedir: $!"); } else { my $pragmatic_dir = $self->{'CPAN_USERID'} . '000'; $pragmatic_dir =~ s/\W_//g; $pragmatic_dir++ while -d "../$pragmatic_dir"; $packagedir = MM->catdir($builddir,$pragmatic_dir); File::Path::mkpath($packagedir); my($f); for $f (@readdir) { # is already without "." and ".." my $to = MM->catdir($packagedir,$f); rename($f,$to) or Carp::confess("Couldn't rename $f to $to: $!"); } } $self->{'build_dir'} = $packagedir; chdir ".."; $self->debug("Changed directory to .. (self is $self [".$self->as_string."])") if $CPAN::DEBUG; File::Path::rmtree("tmp"); if ($CPAN::Config->{keep_source_where} =~ /^no/i ){ $CPAN::Frontend->myprint("Going to unlink $local_file\n"); unlink $local_file or Carp::carp "Couldn't unlink $local_file"; } my($makefilepl) = MM->catfile($packagedir,"Makefile.PL"); unless (-f $makefilepl) { my($configure) = MM->catfile($packagedir,"Configure"); if (-f $configure) { # do we have anything to do? $self->{'configure'} = $configure; } elsif (-f MM->catfile($packagedir,"Makefile")) { $CPAN::Frontend->myprint(qq{ Package comes with a Makefile and without a Makefile.PL. We\'ll try to build it with that Makefile then. }); $self->{writemakefile} = "YES"; sleep 2; } else { my $fh = FileHandle->new(">$makefilepl") or Carp::croak("Could not open >$makefilepl"); my $cf = $self->called_for || "unknown"; $fh->print( qq{# This Makefile.PL has been autogenerated by the module CPAN.pm # because there was no Makefile.PL supplied. # Autogenerated on: }.scalar localtime().qq{ use ExtUtils::MakeMaker; WriteMakefile(NAME => q[$cf]); }); $CPAN::Frontend->myprint(qq{Package comes without Makefile.PL. Writing one on our own (calling it $cf)\n}); } } } return $self; } sub untar_me { my($self,$local_file) = @_; $self->{archived} = "tar"; if (CPAN::Tarzip->untar($local_file)) { $self->{unwrapped} = "YES"; } else { $self->{unwrapped} = "NO"; } } sub unzip_me { my($self,$local_file) = @_; $self->{archived} = "zip"; my $system = "$CPAN::Config->{unzip} $local_file"; if (system($system) == 0) { $self->{unwrapped} = "YES"; } else { $self->{unwrapped} = "NO"; } } sub pm2dir_me { my($self,$local_file) = @_; $self->{archived} = "pm"; my $to = File::Basename::basename($local_file); $to =~ s/\.(gz|Z)$//; if (CPAN::Tarzip->gunzip($local_file,$to)) { $self->{unwrapped} = "YES"; } else { $self->{unwrapped} = "NO"; } } #-> sub CPAN::Distribution::new ; sub new { my($class,%att) = @_; $CPAN::META->{cachemgr} ||= CPAN::CacheMgr->new(); my $this = { %att }; return bless $this, $class; } #-> sub CPAN::Distribution::look ; sub look { my($self) = @_; if ( $CPAN::Config->{'shell'} ) { $CPAN::Frontend->myprint(qq{ Trying to open a subshell in the build directory... }); } else { $CPAN::Frontend->myprint(qq{ Your configuration does not define a value for subshells. Please define it with "o conf shell " }); return; } my $dist = $self->id; my $dir = $self->dir or $self->get; $dir = $self->dir; my $getcwd; $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; my $pwd = CPAN->$getcwd(); chdir($dir); $CPAN::Frontend->myprint(qq{Working directory is $dir\n}); system($CPAN::Config->{'shell'}) == 0 or $CPAN::Frontend->mydie("Subprocess shell error"); chdir($pwd); } #-> sub CPAN::Distribution::readme ; sub readme { my($self) = @_; my($dist) = $self->id; my($sans,$suffix) = $dist =~ /(.+)\.(tgz|tar[\._-]gz|tar\.Z|zip)$/; $self->debug("sans[$sans] suffix[$suffix]\n") if $CPAN::DEBUG; my($local_file); my($local_wanted) = MM->catfile( $CPAN::Config->{keep_source_where}, "authors", "id", split("/","$sans.readme"), ); $self->debug("Doing localize") if $CPAN::DEBUG; $local_file = CPAN::FTP->localize("authors/id/$sans.readme", $local_wanted) or $CPAN::Frontend->mydie(qq{No $sans.readme found});; my $fh_pager = FileHandle->new; local($SIG{PIPE}) = "IGNORE"; $fh_pager->open("|$CPAN::Config->{'pager'}") or die "Could not open pager $CPAN::Config->{'pager'}: $!"; my $fh_readme = FileHandle->new; $fh_readme->open($local_file) or $CPAN::Frontend->mydie(qq{Could not open "$local_file": $!}); $CPAN::Frontend->myprint(qq{ Displaying file $local_file with pager "$CPAN::Config->{'pager'}" }); sleep 2; $fh_pager->print(<$fh_readme>); } #-> sub CPAN::Distribution::verifyMD5 ; sub verifyMD5 { my($self) = @_; EXCUSE: { my @e; $self->{MD5_STATUS} ||= ""; $self->{MD5_STATUS} eq "OK" and push @e, "MD5 Checksum was ok"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } my($lc_want,$lc_file,@local,$basename); @local = split("/",$self->{ID}); pop @local; push @local, "CHECKSUMS"; $lc_want = MM->catfile($CPAN::Config->{keep_source_where}, "authors", "id", @local); local($") = "/"; if ( -s $lc_want && $self->MD5_check_file($lc_want) ) { return $self->{MD5_STATUS} = "OK"; } $lc_file = CPAN::FTP->localize("authors/id/@local", $lc_want,1); unless ($lc_file) { $local[-1] .= ".gz"; $lc_file = CPAN::FTP->localize("authors/id/@local", "$lc_want.gz",1); if ($lc_file) { $lc_file =~ s/\.gz$//; CPAN::Tarzip->gunzip("$lc_file.gz",$lc_file); } else { return; } } $self->MD5_check_file($lc_file); } #-> sub CPAN::Distribution::MD5_check_file ; sub MD5_check_file { my($self,$chk_file) = @_; my($cksum,$file,$basename); $file = $self->{localfile}; $basename = File::Basename::basename($file); my $fh = FileHandle->new; if (open $fh, $chk_file){ local($/); my $eval = <$fh>; close $fh; my($comp) = Safe->new(); $cksum = $comp->reval($eval); if ($@) { rename $chk_file, "$chk_file.bad"; Carp::confess($@) if $@; } } else { Carp::carp "Could not open $chk_file for reading"; } if (exists $cksum->{$basename}{md5}) { $self->debug("Found checksum for $basename:" . "$cksum->{$basename}{md5}\n") if $CPAN::DEBUG; open($fh, $file); binmode $fh; my $eq = $self->eq_MD5($fh,$cksum->{$basename}{'md5'}); $fh->close; $fh = CPAN::Tarzip->TIEHANDLE($file); unless ($eq) { # had to inline it, when I tied it, the tiedness got lost on # the call to eq_MD5. (Jan 1998) my $md5 = MD5->new; my($data,$ref); $ref = \$data; while ($fh->READ($ref, 4096)){ $md5->add($data); } my $hexdigest = $md5->hexdigest; $eq += $hexdigest eq $cksum->{$basename}{'md5-ungz'}; } if ($eq) { $CPAN::Frontend->myprint("Checksum for $file ok\n"); return $self->{MD5_STATUS} = "OK"; } else { $CPAN::Frontend->myprint(qq{Checksum mismatch for }. qq{distribution file. }. qq{Please investigate.\n\n}. $self->as_string, $CPAN::META->instance( 'CPAN::Author', $self->{CPAN_USERID} )->as_string); my $wrap = qq{I\'d recommend removing $file. It seems to be a bogus file. Maybe you have configured your \`urllist\' with a bad URL. Please check this array with \`o conf urllist\', and retry.}; $CPAN::Frontend->myprint(Text::Wrap::wrap("","",$wrap)); $CPAN::Frontend->myprint("\n\n"); sleep 3; return; } # close $fh if fileno($fh); } else { $self->{MD5_STATUS} ||= ""; if ($self->{MD5_STATUS} eq "NIL") { $CPAN::Frontend->myprint(qq{ No md5 checksum for $basename in local $chk_file. Removing $chk_file }); unlink $chk_file or $CPAN::Frontend->myprint("Could not unlink: $!"); sleep 1; } $self->{MD5_STATUS} = "NIL"; return; } } #-> sub CPAN::Distribution::eq_MD5 ; sub eq_MD5 { my($self,$fh,$expectMD5) = @_; my $md5 = MD5->new; my($data); while (read($fh, $data, 4096)){ $md5->add($data); } # $md5->addfile($fh); my $hexdigest = $md5->hexdigest; # warn "fh[$fh] hex[$hexdigest] aexp[$expectMD5]"; $hexdigest eq $expectMD5; } #-> sub CPAN::Distribution::force ; sub force { my($self) = @_; $self->{'force_update'}++; delete $self->{'MD5_STATUS'}; delete $self->{'archived'}; delete $self->{'build_dir'}; delete $self->{'localfile'}; delete $self->{'make'}; delete $self->{'install'}; delete $self->{'unwrapped'}; delete $self->{'writemakefile'}; } sub isa_perl { my($self) = @_; my $file = File::Basename::basename($self->id); return unless $file =~ m{ ^ perl (5) ([._-]) (\d{3}(_[0-4][0-9])?) \.tar[._-]gz $ }x; "$1.$3"; } #-> sub CPAN::Distribution::perl ; sub perl { my($self) = @_; my($perl) = MM->file_name_is_absolute($^X) ? $^X : ""; my $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; my $pwd = CPAN->$getcwd(); my $candidate = MM->catfile($pwd,$^X); $perl ||= $candidate if MM->maybe_command($candidate); unless ($perl) { my ($component,$perl_name); DIST_PERLNAME: foreach $perl_name ($^X, 'perl', 'perl5', "perl$]") { PATH_COMPONENT: foreach $component (MM->path(), $Config::Config{'binexp'}) { next unless defined($component) && $component; my($abs) = MM->catfile($component,$perl_name); if (MM->maybe_command($abs)) { $perl = $abs; last DIST_PERLNAME; } } } } $perl; } #-> sub CPAN::Distribution::make ; sub make { my($self) = @_; $CPAN::Frontend->myprint(sprintf "Running make for %s\n", $self->id); # Emergency brake if they said install Pippi and get newest perl if ($self->isa_perl) { if ( $self->called_for ne $self->id && ! $self->{'force_update'} ) { $CPAN::Frontend->mydie(sprintf qq{ The most recent version "%s" of the module "%s" comes with the current version of perl (%s). I\'ll build that only if you ask for something like force install %s or install %s }, $CPAN::META->instance( 'CPAN::Module', $self->called_for )->cpan_version, $self->called_for, $self->isa_perl, $self->called_for, $self->id); } } $self->get; EXCUSE: { my @e; $self->{archived} eq "NO" and push @e, "Is neither a tar nor a zip archive."; $self->{unwrapped} eq "NO" and push @e, "had problems unarchiving. Please build manually"; exists $self->{writemakefile} && $self->{writemakefile} eq "NO" and push @e, "Had some problem writing Makefile"; defined $self->{'make'} and push @e, "Has already been processed within this session"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } $CPAN::Frontend->myprint("\n CPAN.pm: Going to build ".$self->id."\n\n"); my $builddir = $self->dir; chdir $builddir or Carp::croak("Couldn't chdir $builddir: $!"); $self->debug("Changed directory to $builddir") if $CPAN::DEBUG; my $system; if ($self->{'configure'}) { $system = $self->{'configure'}; } else { my($perl) = $self->perl or die "Couldn\'t find executable perl\n"; my $switch = ""; # This needs a handler that can be turned on or off: # $switch = "-MExtUtils::MakeMaker ". # "-Mops=:default,:filesys_read,:filesys_open,require,chdir" # if $] > 5.00310; $system = "$perl $switch Makefile.PL $CPAN::Config->{makepl_arg}"; } unless (exists $self->{writemakefile}) { local($SIG{ALRM}) = sub { die "inactivity_timeout reached\n" }; my($ret,$pid); $@ = ""; if ($CPAN::Config->{inactivity_timeout}) { eval { alarm $CPAN::Config->{inactivity_timeout}; local $SIG{CHLD} = sub { wait }; if (defined($pid = fork)) { if ($pid) { #parent wait; } else { #child # note, this exec isn't necessary if # inactivity_timeout is 0. On the Mac I'd # suggest, we set it always to 0. exec $system; } } else { $CPAN::Frontend->myprint("Cannot fork: $!"); return; } }; alarm 0; if ($@){ kill 9, $pid; waitpid $pid, 0; $CPAN::Frontend->myprint($@); $self->{writemakefile} = "NO - $@"; $@ = ""; return; } } else { if (0) { warn "Trying to intercept the output of 'perl Makefile.PL'"; require IO::File; # my $fh = FileHandle->new("$system 2>&1 |") or my $fh = IO::File->new("$system 2>&1 |") or die "Couldn't run '$system': $!"; local($|) = 1; while (length($_ = getc($fh))) { print $_; # we want to parse that some day! # unfortunately we have Makefile.PLs that want to talk # and we can't emulate that reliably. I think, we have # to parse Makefile.PL directly } $ret = $fh->close; unless ($ret) { warn $! ? "Error during 'perl Makefile.PL' subprocess: $!" : "Exit status of 'perl Makefile.PL': $?"; $self->{writemakefile} = "NO"; return; } } else { $ret = system($system); if ($ret != 0) { $self->{writemakefile} = "NO"; return; } } } $self->{writemakefile} = "YES"; } return if $CPAN::Signal; $system = join " ", $CPAN::Config->{'make'}, $CPAN::Config->{make_arg}; if (system($system) == 0) { $CPAN::Frontend->myprint(" $system -- OK\n"); $self->{'make'} = "YES"; } else { $self->{writemakefile} = "YES"; $self->{'make'} = "NO"; $CPAN::Frontend->myprint(" $system -- NOT OK\n"); } } #-> sub CPAN::Distribution::test ; sub test { my($self) = @_; $self->make; return if $CPAN::Signal; $CPAN::Frontend->myprint("Running make test\n"); EXCUSE: { my @e; exists $self->{'make'} or push @e, "Make had some problems, maybe interrupted? Won't test"; exists $self->{'make'} and $self->{'make'} eq 'NO' and push @e, "Oops, make had returned bad status"; exists $self->{'build_dir'} or push @e, "Has no own directory"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}"); $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG; my $system = join " ", $CPAN::Config->{'make'}, "test"; if (system($system) == 0) { $CPAN::Frontend->myprint(" $system -- OK\n"); $self->{'make_test'} = "YES"; } else { $self->{'make_test'} = "NO"; $CPAN::Frontend->myprint(" $system -- NOT OK\n"); } } #-> sub CPAN::Distribution::clean ; sub clean { my($self) = @_; $CPAN::Frontend->myprint("Running make clean\n"); EXCUSE: { my @e; exists $self->{'build_dir'} or push @e, "Has no own directory"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}"); $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG; my $system = join " ", $CPAN::Config->{'make'}, "clean"; if (system($system) == 0) { $CPAN::Frontend->myprint(" $system -- OK\n"); $self->force; } else { # Hmmm, what to do if make clean failed? } } #-> sub CPAN::Distribution::install ; sub install { my($self) = @_; $self->test; return if $CPAN::Signal; $CPAN::Frontend->myprint("Running make install\n"); EXCUSE: { my @e; exists $self->{'build_dir'} or push @e, "Has no own directory"; exists $self->{'make'} or push @e, "Make had some problems, maybe interrupted? Won't install"; exists $self->{'make'} and $self->{'make'} eq 'NO' and push @e, "Oops, make had returned bad status"; push @e, "make test had returned bad status, ". "won't install without force" if exists $self->{'make_test'} and $self->{'make_test'} eq 'NO' and ! $self->{'force_update'}; exists $self->{'install'} and push @e, $self->{'install'} eq "YES" ? "Already done" : "Already tried without success"; $CPAN::Frontend->myprint(join "", map {" $_\n"} @e) and return if @e; } chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}"); $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG; my $system = join(" ", $CPAN::Config->{'make'}, "install", $CPAN::Config->{make_install_arg}); my($pipe) = FileHandle->new("$system 2>&1 |"); my($makeout) = ""; while (<$pipe>){ $CPAN::Frontend->myprint($_); $makeout .= $_; } $pipe->close; if ($?==0) { $CPAN::Frontend->myprint(" $system -- OK\n"); $self->{'install'} = "YES"; } else { $self->{'install'} = "NO"; $CPAN::Frontend->myprint(" $system -- NOT OK\n"); if ($makeout =~ /permission/s && $> > 0) { $CPAN::Frontend->myprint(qq{ You may have to su }. qq{to root to install the package\n}); } } } #-> sub CPAN::Distribution::dir ; sub dir { shift->{'build_dir'}; } package CPAN::Bundle; #-> sub CPAN::Bundle::as_string ; sub as_string { my($self) = @_; $self->contains; $self->{INST_VERSION} = $self->inst_version; return $self->SUPER::as_string; } #-> sub CPAN::Bundle::contains ; sub contains { my($self) = @_; my($parsefile) = $self->inst_file; my($id) = $self->id; $self->debug("parsefile[$parsefile]id[$id]") if $CPAN::DEBUG; unless ($parsefile) { # Try to get at it in the cpan directory $self->debug("no parsefile") if $CPAN::DEBUG; Carp::confess "I don't know a $id" unless $self->{CPAN_FILE}; my $dist = $CPAN::META->instance('CPAN::Distribution', $self->{CPAN_FILE}); $dist->get; $self->debug($dist->as_string) if $CPAN::DEBUG; my($todir) = $CPAN::Config->{'cpan_home'}; my(@me,$from,$to,$me); @me = split /::/, $self->id; $me[-1] .= ".pm"; $me = MM->catfile(@me); $from = $self->find_bundle_file($dist->{'build_dir'},$me); $to = MM->catfile($todir,$me); File::Path::mkpath(File::Basename::dirname($to)); File::Copy::copy($from, $to) or Carp::confess("Couldn't copy $from to $to: $!"); $parsefile = $to; } my @result; my $fh = FileHandle->new; local $/ = "\n"; open($fh,$parsefile) or die "Could not open '$parsefile': $!"; my $inpod = 0; $self->debug("parsefile[$parsefile]") if $CPAN::DEBUG; while (<$fh>) { $inpod = /^=(?!head1\s+CONTENTS)/ ? 0 : /^=head1\s+CONTENTS/ ? 1 : $inpod; next unless $inpod; next if /^=/; next if /^\s+$/; chomp; push @result, (split " ", $_, 2)[0]; } close $fh; delete $self->{STATUS}; $self->{CONTAINS} = join ", ", @result; $self->debug("CONTAINS[@result]") if $CPAN::DEBUG; @result; } #-> sub CPAN::Bundle::find_bundle_file sub find_bundle_file { my($self,$where,$what) = @_; $self->debug("where[$where]what[$what]") if $CPAN::DEBUG; my $bu = MM->catfile($where,$what); return $bu if -f $bu; my $manifest = MM->catfile($where,"MANIFEST"); unless (-f $manifest) { require ExtUtils::Manifest; my $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; my $cwd = CPAN->$getcwd(); chdir $where; ExtUtils::Manifest::mkmanifest(); chdir $cwd; } my $fh = FileHandle->new($manifest) or Carp::croak("Couldn't open $manifest: $!"); local($/) = "\n"; while (<$fh>) { next if /^\s*\#/; my($file) = /(\S+)/; if ($file =~ m|\Q$what\E$|) { $bu = $file; return MM->catfile($where,$bu); } elsif ($what =~ s|Bundle/||) { # retry if she managed to # have no Bundle directory if ($file =~ m|\Q$what\E$|) { $bu = $file; return MM->catfile($where,$bu); } } } Carp::croak("Couldn't find a Bundle file in $where"); } #-> sub CPAN::Bundle::inst_file ; sub inst_file { my($self) = @_; my($me,$inst_file); ($me = $self->id) =~ s/.*://; ## my(@me,$inst_file); ## @me = split /::/, $self->id; ## $me[-1] .= ".pm"; $inst_file = MM->catfile($CPAN::Config->{'cpan_home'}, "Bundle", "$me.pm"); ## "Bundle", @me); return $self->{'INST_FILE'} = $inst_file if -f $inst_file; # $inst_file = $self->SUPER::inst_file; # return $self->{'INST_FILE'} = $inst_file if -f $inst_file; # return $self->{'INST_FILE'}; # even if undefined? } #-> sub CPAN::Bundle::rematein ; sub rematein { my($self,$meth) = @_; $self->debug("self[$self] meth[$meth]") if $CPAN::DEBUG; my($id) = $self->id; Carp::croak "Can't $meth $id, don't have an associated bundle file. :-(\n" unless $self->inst_file || $self->{CPAN_FILE}; my($s); for $s ($self->contains) { my($type) = $s =~ m|/| ? 'CPAN::Distribution' : $s =~ m|^Bundle::| ? 'CPAN::Bundle' : 'CPAN::Module'; if ($type eq 'CPAN::Distribution') { $CPAN::Frontend->mywarn(qq{ The Bundle }.$self->id.qq{ contains explicitly a file $s. }); sleep 3; } $CPAN::META->instance($type,$s)->$meth(); } } #sub CPAN::Bundle::xs_file sub xs_file { # If a bundle contains another that contains an xs_file we have # here, we just don't bother I suppose return 0; } #-> sub CPAN::Bundle::force ; sub force { shift->rematein('force',@_); } #-> sub CPAN::Bundle::get ; sub get { shift->rematein('get',@_); } #-> sub CPAN::Bundle::make ; sub make { shift->rematein('make',@_); } #-> sub CPAN::Bundle::test ; sub test { shift->rematein('test',@_); } #-> sub CPAN::Bundle::install ; sub install { my $self = shift; $self->rematein('install',@_); $CPAN::META->delete('CPAN::Queue',$self->id); } #-> sub CPAN::Bundle::clean ; sub clean { shift->rematein('clean',@_); } #-> sub CPAN::Bundle::readme ; sub readme { my($self) = @_; my($file) = $self->cpan_file or $CPAN::Frontend->myprint(qq{ No File found for bundle } . $self->id . qq{\n}), return; $self->debug("self[$self] file[$file]") if $CPAN::DEBUG; $CPAN::META->instance('CPAN::Distribution',$file)->readme; } package CPAN::Module; #-> sub CPAN::Module::as_glimpse ; sub as_glimpse { my($self) = @_; my(@m); my $class = ref($self); $class =~ s/^CPAN:://; push @m, sprintf("%-15s %-15s (%s)\n", $class, $self->{ID}, $self->cpan_file); join "", @m; } #-> sub CPAN::Module::as_string ; sub as_string { my($self) = @_; my(@m); CPAN->debug($self) if $CPAN::DEBUG; my $class = ref($self); $class =~ s/^CPAN:://; local($^W) = 0; push @m, $class, " id = $self->{ID}\n"; my $sprintf = " %-12s %s\n"; push @m, sprintf($sprintf, 'DESCRIPTION', $self->{description}) if $self->{description}; my $sprintf2 = " %-12s %s (%s)\n"; my($userid); if ($userid = $self->{'CPAN_USERID'} || $self->{'userid'}){ my $author; if ($author = CPAN::Shell->expand('Author',$userid)) { my $email = ""; my $m; # old perls if ($m = $author->email) { $email = " <$m>"; } push @m, sprintf( $sprintf2, 'CPAN_USERID', $userid, $author->fullname . $email ); } } push @m, sprintf($sprintf, 'CPAN_VERSION', $self->{CPAN_VERSION}) if $self->{CPAN_VERSION}; push @m, sprintf($sprintf, 'CPAN_FILE', $self->{CPAN_FILE}) if $self->{CPAN_FILE}; my $sprintf3 = " %-12s %1s%1s%1s%1s (%s,%s,%s,%s)\n"; my(%statd,%stats,%statl,%stati); @statd{qw,? i c a b R M S,} = qw,unknown idea pre-alpha alpha beta released mature standard,; @stats{qw,? m d u n,} = qw,unknown mailing-list developer comp.lang.perl.* none,; @statl{qw,? p c + o,} = qw,unknown perl C C++ other,; @stati{qw,? f r O,} = qw,unknown functions references+ties object-oriented,; $statd{' '} = 'unknown'; $stats{' '} = 'unknown'; $statl{' '} = 'unknown'; $stati{' '} = 'unknown'; push @m, sprintf( $sprintf3, 'DSLI_STATUS', $self->{statd}, $self->{stats}, $self->{statl}, $self->{stati}, $statd{$self->{statd}}, $stats{$self->{stats}}, $statl{$self->{statl}}, $stati{$self->{stati}} ) if $self->{statd}; my $local_file = $self->inst_file; if ($local_file) { $self->{MANPAGE} ||= $self->manpage_headline($local_file); } my($item); for $item (qw/MANPAGE CONTAINS/) { push @m, sprintf($sprintf, $item, $self->{$item}) if exists $self->{$item}; } push @m, sprintf($sprintf, 'INST_FILE', $local_file || "(not installed)"); push @m, sprintf($sprintf, 'INST_VERSION', $self->inst_version) if $local_file; join "", @m, "\n"; } sub manpage_headline { my($self,$local_file) = @_; my(@local_file) = $local_file; $local_file =~ s/\.pm$/.pod/; push @local_file, $local_file; my(@result,$locf); for $locf (@local_file) { next unless -f $locf; my $fh = FileHandle->new($locf) or $Carp::Frontend->mydie("Couldn't open $locf: $!"); my $inpod = 0; local $/ = "\n"; while (<$fh>) { $inpod = /^=(?!head1\s+NAME)/ ? 0 : /^=head1\s+NAME/ ? 1 : $inpod; next unless $inpod; next if /^=/; next if /^\s+$/; chomp; push @result, $_; } close $fh; last if @result; } join " ", @result; } #-> sub CPAN::Module::cpan_file ; sub cpan_file { my $self = shift; CPAN->debug($self->id) if $CPAN::DEBUG; unless (defined $self->{'CPAN_FILE'}) { CPAN::Index->reload; } if (exists $self->{'CPAN_FILE'} && defined $self->{'CPAN_FILE'}){ return $self->{'CPAN_FILE'}; } elsif (exists $self->{'userid'} && defined $self->{'userid'}) { my $fullname = $CPAN::META->instance(CPAN::Author, $self->{'userid'})->fullname; my $email = $CPAN::META->instance(CPAN::Author, $self->{'userid'})->email; unless (defined $fullname && defined $email) { return "Contact Author $self->{userid} (Try ``a $self->{userid}'')"; } return "Contact Author $fullname <$email>"; } else { return "N/A"; } } *name = \&cpan_file; #-> sub CPAN::Module::cpan_version ; sub cpan_version { my $self = shift; $self->{'CPAN_VERSION'} = 'undef' unless defined $self->{'CPAN_VERSION'}; # I believe this is # always a bug in the # index and should be # reported as such, # but usually I find # out such an error # and do not want to # provoke too many # bugreports $self->{'CPAN_VERSION'}; } #-> sub CPAN::Module::force ; sub force { my($self) = @_; $self->{'force_update'}++; } #-> sub CPAN::Module::rematein ; sub rematein { my($self,$meth) = @_; $self->debug($self->id) if $CPAN::DEBUG; my $cpan_file = $self->cpan_file; if ($cpan_file eq "N/A" || $cpan_file =~ /^Contact Author/){ $CPAN::Frontend->mywarn(sprintf qq{ The module %s isn\'t available on CPAN. Either the module has not yet been uploaded to CPAN, or it is temporary unavailable. Please contact the author to find out more about the status. Try ``i %s''. }, $self->id, $self->id, ); return; } my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file); $pack->called_for($self->id); $pack->force if exists $self->{'force_update'}; $pack->$meth(); delete $self->{'force_update'}; } #-> sub CPAN::Module::readme ; sub readme { shift->rematein('readme') } #-> sub CPAN::Module::look ; sub look { shift->rematein('look') } #-> sub CPAN::Module::get ; sub get { shift->rematein('get',@_); } #-> sub CPAN::Module::make ; sub make { shift->rematein('make') } #-> sub CPAN::Module::test ; sub test { shift->rematein('test') } #-> sub CPAN::Module::install ; sub install { my($self) = @_; my($doit) = 0; my($latest) = $self->cpan_version; $latest ||= 0; my($inst_file) = $self->inst_file; my($have) = 0; if (defined $inst_file) { $have = $self->inst_version; } if (1){ # A block for scoping $^W, the if is just for the visual # appeal local($^W)=0; if ($inst_file && $have >= $latest && not exists $self->{'force_update'} ) { $CPAN::Frontend->myprint( $self->id. " is up to date.\n"); } else { $doit = 1; } } $self->rematein('install') if $doit; $CPAN::META->delete('CPAN::Queue',$self->id); } #-> sub CPAN::Module::clean ; sub clean { shift->rematein('clean') } #-> sub CPAN::Module::inst_file ; sub inst_file { my($self) = @_; my($dir,@packpath); @packpath = split /::/, $self->{ID}; $packpath[-1] .= ".pm"; foreach $dir (@INC) { my $pmfile = MM->catfile($dir,@packpath); if (-f $pmfile){ return $pmfile; } } return; } #-> sub CPAN::Module::xs_file ; sub xs_file { my($self) = @_; my($dir,@packpath); @packpath = split /::/, $self->{ID}; push @packpath, $packpath[-1]; $packpath[-1] .= "." . $Config::Config{'dlext'}; foreach $dir (@INC) { my $xsfile = MM->catfile($dir,'auto',@packpath); if (-f $xsfile){ return $xsfile; } } return; } #-> sub CPAN::Module::inst_version ; sub inst_version { my($self) = @_; my $parsefile = $self->inst_file or return; local($^W) = 0 if $] < 5.00303 && $ExtUtils::MakeMaker::VERSION < 5.38; my $have = MM->parse_version($parsefile) || "undef"; $have =~ s/\s+//g; $have; } package CPAN::Tarzip; sub gzip { my($class,$read,$write) = @_; if ($CPAN::META->has_inst("Compress::Zlib")) { my($buffer,$fhw); $fhw = FileHandle->new($read) or $CPAN::Frontend->mydie("Could not open $read: $!"); my $gz = Compress::Zlib::gzopen($write, "wb") or $CPAN::Frontend->mydie("Cannot gzopen $write: $!\n"); $gz->gzwrite($buffer) while read($fhw,$buffer,4096) > 0 ; $gz->gzclose() ; $fhw->close; return 1; } else { system("$CPAN::Config->{'gzip'} -c $read > $write")==0; } } sub gunzip { my($class,$read,$write) = @_; if ($CPAN::META->has_inst("Compress::Zlib")) { my($buffer,$fhw); $fhw = FileHandle->new(">$write") or $CPAN::Frontend->mydie("Could not open >$write: $!"); my $gz = Compress::Zlib::gzopen($read, "rb") or $CPAN::Frontend->mydie("Cannot gzopen $read: $!\n"); $fhw->print($buffer) while $gz->gzread($buffer) > 0 ; $CPAN::Frontend->mydie("Error reading from $read: $!\n") if $gz->gzerror != Compress::Zlib::Z_STREAM_END(); $gz->gzclose() ; $fhw->close; return 1; } else { system("$CPAN::Config->{'gzip'} -dc $read > $write")==0; } } sub gtest { my($class,$read) = @_; if ($CPAN::META->has_inst("Compress::Zlib")) { my($buffer); my $gz = Compress::Zlib::gzopen($read, "rb") or $CPAN::Frontend->mydie("Cannot open $read: $!\n"); 1 while $gz->gzread($buffer) > 0 ; $CPAN::Frontend->mydie("Error reading from $read: $!\n") if $gz->gzerror != Compress::Zlib::Z_STREAM_END(); $gz->gzclose() ; return 1; } else { return system("$CPAN::Config->{'gzip'} -dt $read")==0; } } sub TIEHANDLE { my($class,$file) = @_; my $ret; $class->debug("file[$file]"); if ($CPAN::META->has_inst("Compress::Zlib")) { my $gz = Compress::Zlib::gzopen($file,"rb") or die "Could not gzopen $file"; $ret = bless {GZ => $gz}, $class; } else { my $pipe = "$CPAN::Config->{'gzip'} --decompress --stdout $file |"; my $fh = FileHandle->new($pipe) or die "Could pipe[$pipe]: $!"; binmode $fh; $ret = bless {FH => $fh}, $class; } $ret; } sub READLINE { my($self) = @_; if (exists $self->{GZ}) { my $gz = $self->{GZ}; my($line,$bytesread); $bytesread = $gz->gzreadline($line); return undef if $bytesread == 0; return $line; } else { my $fh = $self->{FH}; return scalar <$fh>; } } sub READ { my($self,$ref,$length,$offset) = @_; die "read with offset not implemented" if defined $offset; if (exists $self->{GZ}) { my $gz = $self->{GZ}; my $byteread = $gz->gzread($$ref,$length);# 30eaf79e8b446ef52464b5422da328a8 return $byteread; } else { my $fh = $self->{FH}; return read($fh,$$ref,$length); } } sub DESTROY { my($self) = @_; if (exists $self->{GZ}) { my $gz = $self->{GZ}; $gz->gzclose(); } else { my $fh = $self->{FH}; $fh->close; } undef $self; } sub untar { my($class,$file) = @_; # had to disable, because version 0.07 seems to be buggy if (MM->maybe_command($CPAN::Config->{'gzip'}) && MM->maybe_command($CPAN::Config->{'tar'})) { my $system = "$CPAN::Config->{'gzip'} --decompress --stdout " . "$file | $CPAN::Config->{tar} xvf -"; return system($system) == 0; } elsif ($CPAN::META->has_inst("Archive::Tar") && $CPAN::META->has_inst("Compress::Zlib") ) { my $tar = Archive::Tar->new($file,1); $tar->extract($tar->list_files); # I'm pretty sure we have nothing # that isn't compressed return 1; } else { $CPAN::Frontend->mydie(qq{ CPAN.pm needs either both external programs tar and gzip installed or both the modules Archive::Tar and Compress::Zlib. Neither prerequisite is available. Can\'t continue. }); } } package CPAN; 1; __END__ =head1 NAME CPAN - query, download and build perl modules from CPAN sites =head1 SYNOPSIS Interactive mode: perl -MCPAN -e shell; Batch mode: use CPAN; autobundle, clean, install, make, recompile, test =head1 DESCRIPTION The CPAN module is designed to automate the make and install of perl modules and extensions. It includes some searching capabilities and knows how to use Net::FTP or LWP (or lynx or an external ftp client) to fetch the raw data from the net. Modules are fetched from one or more of the mirrored CPAN (Comprehensive Perl Archive Network) sites and unpacked in a dedicated directory. The CPAN module also supports the concept of named and versioned 'bundles' of modules. Bundles simplify the handling of sets of related modules. See BUNDLES below. The package contains a session manager and a cache manager. There is no status retained between sessions. The session manager keeps track of what has been fetched, built and installed in the current session. The cache manager keeps track of the disk space occupied by the make processes and deletes excess space according to a simple FIFO mechanism. All methods provided are accessible in a programmer style and in an interactive shell style. =head2 Interactive Mode The interactive mode is entered by running perl -MCPAN -e shell which puts you into a readline interface. You will have the most fun if you install Term::ReadKey and Term::ReadLine to enjoy both history and command completion. Once you are on the command line, type 'h' and the rest should be self-explanatory. The most common uses of the interactive modes are =over 2 =item Searching for authors, bundles, distribution files and modules There are corresponding one-letter commands C, C, C, and C for each of the four categories and another, C for any of the mentioned four. Each of the four entities is implemented as a class with slightly differing methods for displaying an object. Arguments you pass to these commands are either strings exactly matching the identification string of an object or regular expressions that are then matched case-insensitively against various attributes of the objects. The parser recognizes a regular expression only if you enclose it between two slashes. The principle is that the number of found objects influences how an item is displayed. If the search finds one item, the result is displayed as object-Eas_string, but if we find more than one, we display each as object-Eas_glimpse. E.g. cpan> a ANDK Author id = ANDK EMAIL a.koenig@franz.ww.TU-Berlin.DE FULLNAME Andreas König cpan> a /andk/ Author id = ANDK EMAIL a.koenig@franz.ww.TU-Berlin.DE FULLNAME Andreas König cpan> a /and.*rt/ Author ANDYD (Andy Dougherty) Author MERLYN (Randal L. Schwartz) =item make, test, install, clean modules or distributions These commands take any number of arguments and investigate what is necessary to perform the action. If the argument is a distribution file name (recognized by embedded slashes), it is processed. If it is a module, CPAN determines the distribution file in which this module is included and processes that. Any C or C are run unconditionally. An install also is run unconditionally. But for install CPAN checks if an install is actually needed for it and prints I in the case that the distribution file containing the module doesnE<39>t need to be updated. CPAN also keeps track of what it has done within the current session and doesnE<39>t try to build a package a second time regardless if it succeeded or not. The C command takes as a first argument the method to invoke (currently: C, C, or C) and executes the command from scratch. Example: cpan> install OpenGL OpenGL is up to date. cpan> force install OpenGL Running make OpenGL-0.4/ OpenGL-0.4/COPYRIGHT [...] A C command results in a make clean being executed within the distribution file's working directory. =item readme, look module or distribution These two commands take only one argument, be it a module or a distribution file. C unconditionally runs, displaying the README of the associated distribution file. C gets and untars (if not yet done) the distribution file, changes to the appropriate directory and opens a subshell process in that directory. =item Signals CPAN.pm installs signal handlers for SIGINT and SIGTERM. While you are in the cpan-shell it is intended that you can press C<^C> anytime and return to the cpan-shell prompt. A SIGTERM will cause the cpan-shell to clean up and leave the shell loop. You can emulate the effect of a SIGTERM by sending two consecutive SIGINTs, which usually means by pressing C<^C> twice. CPAN.pm ignores a SIGPIPE. If the user sets inactivity_timeout, a SIGALRM is used during the run of the C subprocess. =back =head2 CPAN::Shell The commands that are available in the shell interface are methods in the package CPAN::Shell. If you enter the shell command, all your input is split by the Text::ParseWords::shellwords() routine which acts like most shells do. The first word is being interpreted as the method to be called and the rest of the words are treated as arguments to this method. Continuation lines are supported if a line ends with a literal backslash. =head2 autobundle C writes a bundle file into the C<$CPAN::Config-E{cpan_home}/Bundle> directory. The file contains a list of all modules that are both available from CPAN and currently installed within @INC. The name of the bundle file is based on the current date and a counter. =head2 recompile recompile() is a very special command in that it takes no argument and runs the make/test/install cycle with brute force over all installed dynamically loadable extensions (aka XS modules) with 'force' in effect. The primary purpose of this command is to finish a network installation. Imagine, you have a common source tree for two different architectures. You decide to do a completely independent fresh installation. You start on one architecture with the help of a Bundle file produced earlier. CPAN installs the whole Bundle for you, but when you try to repeat the job on the second architecture, CPAN responds with a C<"Foo up to date"> message for all modules. So you invoke CPAN's recompile on the second architecture and youE<39>re done. Another popular use for C is to act as a rescue in case your perl breaks binary compatibility. If one of the modules that CPAN uses is in turn depending on binary compatibility (so you cannot run CPAN commands), then you should try the CPAN::Nox module for recovery. =head2 The four C Classes: Author, Bundle, Module, Distribution Although it may be considered internal, the class hierarchy does matter for both users and programmer. CPAN.pm deals with above mentioned four classes, and all those classes share a set of methods. A classical single polymorphism is in effect. A metaclass object registers all objects of all kinds and indexes them with a string. The strings referencing objects have a separated namespace (well, not completely separated): Namespace Class words containing a "/" (slash) Distribution words starting with Bundle:: Bundle everything else Module or Author Modules know their associated Distribution objects. They always refer to the most recent official release. Developers may mark their releases as unstable development versions (by inserting an underbar into the visible version number), so the really hottest and newest distribution file is not always the default. If a module Foo circulates on CPAN in both version 1.23 and 1.23_90, CPAN.pm offers a convenient way to install version 1.23 by saying install Foo This would install the complete distribution file (say BAR/Foo-1.23.tar.gz) with all accompanying material. But if you would like to install version 1.23_90, you need to know where the distribution file resides on CPAN relative to the authors/id/ directory. If the author is BAR, this might be BAR/Foo-1.23_90.tar.gz; so you would have to say install BAR/Foo-1.23_90.tar.gz The first example will be driven by an object of the class CPAN::Module, the second by an object of class CPAN::Distribution. =head2 ProgrammerE<39>s interface If you do not enter the shell, the available shell commands are both available as methods (Cinstall(...)>) and as functions in the calling package (C). There's currently only one class that has a stable interface - CPAN::Shell. All commands that are available in the CPAN shell are methods of the class CPAN::Shell. Each of the commands that produce listings of modules (C, C, C) returns a list of the IDs of all modules within the list. =over 2 =item expand($type,@things) The IDs of all objects available within a program are strings that can be expanded to the corresponding real objects with the Cexpand("Module",@things)> method. Expand returns a list of CPAN::Module objects according to the C<@things> arguments given. In scalar context it only returns the first element of the list. =item Programming Examples This enables the programmer to do operations that combine functionalities that are available in the shell. # install everything that is outdated on my disk: perl -MCPAN -e 'CPAN::Shell->install(CPAN::Shell->r)' # install my favorite programs if necessary: for $mod (qw(Net::FTP MD5 Data::Dumper)){ my $obj = CPAN::Shell->expand('Module',$mod); $obj->install; } # list all modules on my disk that have no VERSION number for $mod (CPAN::Shell->expand("Module","/./")){ next unless $mod->inst_file; # MakeMaker convention for undefined $VERSION: next unless $mod->inst_version eq "undef"; print "No VERSION in ", $mod->id, "\n"; } =back =head2 Methods in the four =head2 Cache Manager Currently the cache manager only keeps track of the build directory ($CPAN::Config->{build_dir}). It is a simple FIFO mechanism that deletes complete directories below C as soon as the size of all directories there gets bigger than $CPAN::Config->{build_cache} (in MB). The contents of this cache may be used for later re-installations that you intend to do manually, but will never be trusted by CPAN itself. This is due to the fact that the user might use these directories for building modules on different architectures. There is another directory ($CPAN::Config->{keep_source_where}) where the original distribution files are kept. This directory is not covered by the cache manager and must be controlled by the user. If you choose to have the same directory as build_dir and as keep_source_where directory, then your sources will be deleted with the same fifo mechanism. =head2 Bundles A bundle is just a perl module in the namespace Bundle:: that does not define any functions or methods. It usually only contains documentation. It starts like a perl module with a package declaration and a $VERSION variable. After that the pod section looks like any other pod with the only difference being that I exists starting with (verbatim): =head1 CONTENTS In this pod section each line obeys the format Module_Name [Version_String] [- optional text] The only required part is the first field, the name of a module (e.g. Foo::Bar, ie. I the name of the distribution file). The rest of the line is optional. The comment part is delimited by a dash just as in the man page header. The distribution of a bundle should follow the same convention as other distributions. Bundles are treated specially in the CPAN package. If you say 'install Bundle::Tkkit' (assuming such a bundle exists), CPAN will install all the modules in the CONTENTS section of the pod. You can install your own Bundles locally by placing a conformant Bundle file somewhere into your @INC path. The autobundle() command which is available in the shell interface does that for you by including all currently installed modules in a snapshot bundle file. =head2 Prerequisites If you have a local mirror of CPAN and can access all files with "file:" URLs, then you only need a perl better than perl5.003 to run this module. Otherwise Net::FTP is strongly recommended. LWP may be required for non-UNIX systems or if your nearest CPAN site is associated with an URL that is not C. If you have neither Net::FTP nor LWP, there is a fallback mechanism implemented for an external ftp command or for an external lynx command. =head2 Finding packages and VERSION This module presumes that all packages on CPAN =over 2 =item * declare their $VERSION variable in an easy to parse manner. This prerequisite can hardly be relaxed because it consumes far too much memory to load all packages into the running program just to determine the $VERSION variable. Currently all programs that are dealing with version use something like this perl -MExtUtils::MakeMaker -le \ 'print MM->parse_version($ARGV[0])' filename If you are author of a package and wonder if your $VERSION can be parsed, please try the above method. =item * come as compressed or gzipped tarfiles or as zip files and contain a Makefile.PL (well, we try to handle a bit more, but without much enthusiasm). =back =head2 Debugging The debugging of this module is pretty difficult, because we have interferences of the software producing the indices on CPAN, of the mirroring process on CPAN, of packaging, of configuration, of synchronicity, and of bugs within CPAN.pm. In interactive mode you can try "o debug" which will list options for debugging the various parts of the package. The output may not be very useful for you as it's just a by-product of my own testing, but if you have an idea which part of the package may have a bug, it's sometimes worth to give it a try and send me more specific output. You should know that "o debug" has built-in completion support. =head2 Floppy, Zip, and all that Jazz CPAN.pm works nicely without network too. If you maintain machines that are not networked at all, you should consider working with file: URLs. Of course, you have to collect your modules somewhere first. So you might use CPAN.pm to put together all you need on a networked machine. Then copy the $CPAN::Config->{keep_source_where} (but not $CPAN::Config->{build_dir}) directory on a floppy. This floppy is kind of a personal CPAN. CPAN.pm on the non-networked machines works nicely with this floppy. =head1 CONFIGURATION When the CPAN module is installed, a site wide configuration file is created as CPAN/Config.pm. The default values defined there can be overridden in another configuration file: CPAN/MyConfig.pm. You can store this file in $HOME/.cpan/CPAN/MyConfig.pm if you want, because $HOME/.cpan is added to the search path of the CPAN module before the use() or require() statements. Currently the following keys in the hash reference $CPAN::Config are defined: build_cache size of cache for directories to build modules build_dir locally accessible directory to build modules index_expire after this many days refetch index files cpan_home local directory reserved for this package gzip location of external program gzip inactivity_timeout breaks interactive Makefile.PLs after this many seconds inactivity. Set to 0 to never break. inhibit_startup_message if true, does not print the startup message keep_source keep the source in a local directory? keep_source_where directory in which to keep the source (if we do) make location of external make program make_arg arguments that should always be passed to 'make' make_install_arg same as make_arg for 'make install' makepl_arg arguments passed to 'perl Makefile.PL' pager location of external program more (or any pager) tar location of external program tar unzip location of external program unzip urllist arrayref to nearby CPAN sites (or equivalent locations) wait_list arrayref to a wait server to try (See CPAN::WAIT) You can set and query each of these options interactively in the cpan shell with the command set defined within the C command: =over 2 =item o conf Escalar optionE prints the current value of the I =item o conf Escalar optionE EvalueE Sets the value of the I to I =item o conf Elist optionE prints the current value of the I in MakeMaker's neatvalue format. =item o conf Elist optionE [shift|pop] shifts or pops the array in the I variable =item o conf Elist optionE [unshift|push|splice] ElistE works like the corresponding perl commands. =back =head2 CD-ROM support The C parameter of the configuration table contains a list of URLs that are to be used for downloading. If the list contains any C URLs, CPAN always tries to get files from there first. This feature is disabled for index files. So the recommendation for the owner of a CD-ROM with CPAN contents is: include your local, possibly outdated CD-ROM as a C URL at the end of urllist, e.g. o conf urllist push file://localhost/CDROM/CPAN CPAN.pm will then fetch the index files from one of the CPAN sites that come at the beginning of urllist. It will later check for each module if there is a local copy of the most recent version. =head1 SECURITY There's no strong security layer in CPAN.pm. CPAN.pm helps you to install foreign, unmasked, unsigned code on your machine. We compare to a checksum that comes from the net just as the distribution file itself. If somebody has managed to tamper with the distribution file, they may have as well tampered with the CHECKSUMS file. Future development will go towards strong authentification. =head1 EXPORT Most functions in package CPAN are exported per default. The reason for this is that the primary use is intended for the cpan shell or for oneliners. =head1 BUGS We should give coverage for _all_ of the CPAN and not just the PAUSE part, right? In this discussion CPAN and PAUSE have become equal -- but they are not. PAUSE is authors/ and modules/. CPAN is PAUSE plus the clpa/, doc/, misc/, ports/, src/, scripts/. Future development should be directed towards a better integration of the other parts. If a Makefile.PL requires special customization of libraries, prompts the user for special input, etc. then you may find CPAN is not able to build the distribution. In that case, you should attempt the traditional method of building a Perl module package from a shell. =head1 AUTHOR Andreas König Ea.koenig@mind.deE =head1 SEE ALSO perl(1), CPAN::Nox(3) =cut