# IO::Socket.pm # # Copyright (c) 1996 Graham Barr . All rights # reserved. This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Socket; =head1 NAME IO::Socket - Object interface to socket communications =head1 SYNOPSIS use IO::Socket; =head1 DESCRIPTION C provides an object interface to creating and using sockets. It is built upon the L interface and inherits all the methods defined by L. C only defines methods for those operations which are common to all types of socket. Operations which are specified to a socket in a particular domain have methods defined in sub classes of C C will export all functions (and constants) defined by L. =head1 CONSTRUCTOR =over 4 =item new ( [ARGS] ) Creates an C, which is a reference to a newly created symbol (see the C package). C optionally takes arguments, these arguments are in key-value pairs. C only looks for one key C which tells new which domain the socket will be in. All other arguments will be passed to the configuration method of the package for that domain, See below. Cs will be in autoflush mode after creation. Note that versions of IO::Socket prior to 1.1603 (as shipped with Perl 5.004_04) did not do this. So if you need backward compatibility, you should set autoflush explicitly. =back =head1 METHODS See L for complete descriptions of each of the following supported C methods, which are just front ends for the corresponding built-in functions: socket socketpair bind listen accept send recv peername (getpeername) sockname (getsockname) Some methods take slightly different arguments to those defined in L in attempt to make the interface more flexible. These are =over 4 =item accept([PKG]) perform the system call C on the socket and return a new object. The new object will be created in the same class as the listen socket, unless C is specified. This object can be used to communicate with the client that was trying to connect. In a scalar context the new socket is returned, or undef upon failure. In an array context a two-element array is returned containing the new socket and the peer address, the list will be empty upon failure. Additional methods that are provided are =item timeout([VAL]) Set or get the timeout value associated with this socket. If called without any arguments then the current setting is returned. If called with an argument the current setting is changed and the previous value returned. =item sockopt(OPT [, VAL]) Unified method to both set and get options in the SOL_SOCKET level. If called with one argument then getsockopt is called, otherwise setsockopt is called. =item sockdomain Returns the numerical number for the socket domain type. For example, for a AF_INET socket the value of &AF_INET will be returned. =item socktype Returns the numerical number for the socket type. For example, for a SOCK_STREAM socket the value of &SOCK_STREAM will be returned. =item protocol Returns the numerical number for the protocol being used on the socket, if known. If the protocol is unknown, as with an AF_UNIX socket, zero is returned. =back =cut require 5.000; use Config; use IO::Handle; use Socket 1.3; use Carp; use strict; use vars qw(@ISA $VERSION); use Exporter; @ISA = qw(IO::Handle); $VERSION = "1.1603"; sub import { my $pkg = shift; my $callpkg = caller; Exporter::export 'Socket', $callpkg, @_; } sub new { my($class,%arg) = @_; my $fh = $class->SUPER::new(); $fh->autoflush; ${*$fh}{'io_socket_timeout'} = delete $arg{Timeout}; return scalar(%arg) ? $fh->configure(\%arg) : $fh; } my @domain2pkg = (); sub register_domain { my($p,$d) = @_; $domain2pkg[$d] = $p; } sub configure { my($fh,$arg) = @_; my $domain = delete $arg->{Domain}; croak 'IO::Socket: Cannot configure a generic socket' unless defined $domain; croak "IO::Socket: Unsupported socket domain" unless defined $domain2pkg[$domain]; croak "IO::Socket: Cannot configure socket in domain '$domain'" unless ref($fh) eq "IO::Socket"; bless($fh, $domain2pkg[$domain]); $fh->configure($arg); } sub socket { @_ == 4 or croak 'usage: $fh->socket(DOMAIN, TYPE, PROTOCOL)'; my($fh,$domain,$type,$protocol) = @_; socket($fh,$domain,$type,$protocol) or return undef; ${*$fh}{'io_socket_domain'} = $domain; ${*$fh}{'io_socket_type'} = $type; ${*$fh}{'io_socket_proto'} = $protocol; $fh; } sub socketpair { @_ == 4 || croak 'usage: IO::Socket->pair(DOMAIN, TYPE, PROTOCOL)'; my($class,$domain,$type,$protocol) = @_; my $fh1 = $class->new(); my $fh2 = $class->new(); socketpair($fh1,$fh2,$domain,$type,$protocol) or return (); ${*$fh1}{'io_socket_type'} = ${*$fh2}{'io_socket_type'} = $type; ${*$fh1}{'io_socket_proto'} = ${*$fh2}{'io_socket_proto'} = $protocol; ($fh1,$fh2); } sub connect { @_ == 2 || @_ == 3 or croak 'usage: $fh->connect(NAME) or $fh->connect(PORT, ADDR)'; my $fh = shift; my $addr = @_ == 1 ? shift : sockaddr_in(@_); my $timeout = ${*$fh}{'io_socket_timeout'}; local($SIG{ALRM}) = $timeout ? sub { undef $fh; } : $SIG{ALRM} || 'DEFAULT'; eval { croak 'connect: Bad address' if(@_ == 2 && !defined $_[1]); if($timeout) { defined $Config{d_alarm} && defined alarm($timeout) or $timeout = 0; } my $ok = connect($fh, $addr); alarm(0) if($timeout); croak "connect: timeout" unless defined $fh; undef $fh unless $ok; }; $fh; } sub bind { @_ == 2 || @_ == 3 or croak 'usage: $fh->bind(NAME) or $fh->bind(PORT, ADDR)'; my $fh = shift; my $addr = @_ == 1 ? shift : sockaddr_in(@_); return bind($fh, $addr) ? $fh : undef; } sub listen { @_ >= 1 && @_ <= 2 or croak 'usage: $fh->listen([QUEUE])'; my($fh,$queue) = @_; $queue = 5 unless $queue && $queue > 0; return listen($fh, $queue) ? $fh : undef; } sub accept { @_ == 1 || @_ == 2 or croak 'usage $fh->accept([PKG])'; my $fh = shift; my $pkg = shift || $fh; my $timeout = ${*$fh}{'io_socket_timeout'}; my $new = $pkg->new(Timeout => $timeout); my $peer = undef; eval { if($timeout) { my $fdset = ""; vec($fdset, $fh->fileno,1) = 1; croak "accept: timeout" unless select($fdset,undef,undef,$timeout); } $peer = accept($new,$fh); }; return wantarray ? defined $peer ? ($new, $peer) : () : defined $peer ? $new : undef; } sub sockname { @_ == 1 or croak 'usage: $fh->sockname()'; getsockname($_[0]); } sub peername { @_ == 1 or croak 'usage: $fh->peername()'; my($fh) = @_; getpeername($fh) || ${*$fh}{'io_socket_peername'} || undef; } sub send { @_ >= 2 && @_ <= 4 or croak 'usage: $fh->send(BUF, [FLAGS, [TO]])'; my $fh = $_[0]; my $flags = $_[2] || 0; my $peer = $_[3] || $fh->peername; croak 'send: Cannot determine peer address' unless($peer); my $r = defined(getpeername($fh)) ? send($fh, $_[1], $flags) : send($fh, $_[1], $flags, $peer); # remember who we send to, if it was sucessful ${*$fh}{'io_socket_peername'} = $peer if(@_ == 4 && defined $r); $r; } sub recv { @_ == 3 || @_ == 4 or croak 'usage: $fh->recv(BUF, LEN [, FLAGS])'; my $sock = $_[0]; my $len = $_[2]; my $flags = $_[3] || 0; # remember who we recv'd from ${*$sock}{'io_socket_peername'} = recv($sock, $_[1]='', $len, $flags); } sub setsockopt { @_ == 4 or croak '$fh->setsockopt(LEVEL, OPTNAME)'; setsockopt($_[0],$_[1],$_[2],$_[3]); } my $intsize = length(pack("i",0)); sub getsockopt { @_ == 3 or croak '$fh->getsockopt(LEVEL, OPTNAME)'; my $r = getsockopt($_[0],$_[1],$_[2]); # Just a guess $r = unpack("i", $r) if(defined $r && length($r) == $intsize); $r; } sub sockopt { my $fh = shift; @_ == 1 ? $fh->getsockopt(SOL_SOCKET,@_) : $fh->setsockopt(SOL_SOCKET,@_); } sub timeout { @_ == 1 || @_ == 2 or croak 'usage: $fh->timeout([VALUE])'; my($fh,$val) = @_; my $r = ${*$fh}{'io_socket_timeout'} || undef; ${*$fh}{'io_socket_timeout'} = 0 + $val if(@_ == 2); $r; } sub sockdomain { @_ == 1 or croak 'usage: $fh->sockdomain()'; my $fh = shift; ${*$fh}{'io_socket_domain'}; } sub socktype { @_ == 1 or croak 'usage: $fh->socktype()'; my $fh = shift; ${*$fh}{'io_socket_type'} } sub protocol { @_ == 1 or croak 'usage: $fh->protocol()'; my($fh) = @_; ${*$fh}{'io_socket_protocol'}; } =head1 SUB-CLASSES =cut ## ## AF_INET ## package IO::Socket::INET; use strict; use vars qw(@ISA); use Socket; use Carp; use Exporter; @ISA = qw(IO::Socket); IO::Socket::INET->register_domain( AF_INET ); my %socket_type = ( tcp => SOCK_STREAM, udp => SOCK_DGRAM, icmp => SOCK_RAW, ); =head2 IO::Socket::INET C provides a constructor to create an AF_INET domain socket and some related methods. The constructor can take the following options PeerAddr Remote host address [:] PeerPort Remote port or service [()] | LocalAddr Local host bind address hostname[:port] LocalPort Local host bind port [()] | Proto Protocol name (or number) "tcp" | "udp" | ... Type Socket type SOCK_STREAM | SOCK_DGRAM | ... Listen Queue size for listen Reuse Set SO_REUSEADDR before binding Timeout Timeout value for various operations If C is defined then a listen socket is created, else if the socket type, which is derived from the protocol, is SOCK_STREAM then connect() is called. The C can be a hostname or the IP-address on the "xx.xx.xx.xx" form. The C can be a number or a symbolic service name. The service name might be followed by a number in parenthesis which is used if the service is not known by the system. The C specification can also be embedded in the C by preceding it with a ":". If C is not given and you specify a symbolic C port, then the constructor will try to derive C from the service name. As a last resort C "tcp" is assumed. The C parameter will be deduced from C if not specified. If the constructor is only passed a single argument, it is assumed to be a C specification. Examples: $sock = IO::Socket::INET->new(PeerAddr => 'www.perl.org', PeerPort => 'http(80)', Proto => 'tcp'); $sock = IO::Socket::INET->new(PeerAddr => 'localhost:smtp(25)'); $sock = IO::Socket::INET->new(Listen => 5, LocalAddr => 'localhost', LocalPort => 9000, Proto => 'tcp'); $sock = IO::Socket::INET->new('127.0.0.1:25'); =head2 METHODS =over 4 =item sockaddr () Return the address part of the sockaddr structure for the socket =item sockport () Return the port number that the socket is using on the local host =item sockhost () Return the address part of the sockaddr structure for the socket in a text form xx.xx.xx.xx =item peeraddr () Return the address part of the sockaddr structure for the socket on the peer host =item peerport () Return the port number for the socket on the peer host. =item peerhost () Return the address part of the sockaddr structure for the socket on the peer host in a text form xx.xx.xx.xx =back =cut sub new { my $class = shift; unshift(@_, "PeerAddr") if @_ == 1; return $class->SUPER::new(@_); } sub _sock_info { my($addr,$port,$proto) = @_; my @proto = (); my @serv = (); $port = $1 if(defined $addr && $addr =~ s,:([\w\(\)/]+)$,,); if(defined $proto) { @proto = $proto =~ m,\D, ? getprotobyname($proto) : getprotobynumber($proto); $proto = $proto[2] || undef; } if(defined $port) { $port =~ s,\((\d+)\)$,,; my $defport = $1 || undef; my $pnum = ($port =~ m,^(\d+)$,)[0]; @serv= getservbyname($port, $proto[0] || "") if($port =~ m,\D,); $port = $pnum || $serv[2] || $defport || undef; $proto = (getprotobyname($serv[3]))[2] || undef if @serv && !$proto; } return ($addr || undef, $port || undef, $proto || undef ); } sub _error { my $fh = shift; $@ = join("",ref($fh),": ",@_); carp $@ if $^W; close($fh) if(defined fileno($fh)); return undef; } sub configure { my($fh,$arg) = @_; my($lport,$rport,$laddr,$raddr,$proto,$type); ($laddr,$lport,$proto) = _sock_info($arg->{LocalAddr}, $arg->{LocalPort}, $arg->{Proto}); $laddr = defined $laddr ? inet_aton($laddr) : INADDR_ANY; return _error($fh,"Bad hostname '",$arg->{LocalAddr},"'") unless(defined $laddr); unless(exists $arg->{Listen}) { ($raddr,$rport,$proto) = _sock_info($arg->{PeerAddr}, $arg->{PeerPort}, $proto); } if(defined $raddr) { $raddr = inet_aton($raddr); return _error($fh,"Bad hostname '",$arg->{PeerAddr},"'") unless(defined $raddr); } $proto ||= (getprotobyname "tcp")[2]; return _error($fh,'Cannot determine protocol') unless($proto); my $pname = (getprotobynumber($proto))[0]; $type = $arg->{Type} || $socket_type{$pname}; $fh->socket(AF_INET, $type, $proto) or return _error($fh,"$!"); if ($arg->{Reuse}) { $fh->sockopt(SO_REUSEADDR,1) or return _error($fh); } $fh->bind($lport || 0, $laddr) or return _error($fh,"$!"); if(exists $arg->{Listen}) { $fh->listen($arg->{Listen} || 5) or return _error($fh,"$!"); } else { return _error($fh,'Cannot determine remote port') unless($rport || $type == SOCK_DGRAM || $type == SOCK_RAW); if($type == SOCK_STREAM || defined $raddr) { return _error($fh,'Bad peer address') unless(defined $raddr); $fh->connect($rport,$raddr) or return _error($fh,"$!"); } } $fh; } sub sockaddr { @_ == 1 or croak 'usage: $fh->sockaddr()'; my($fh) = @_; (sockaddr_in($fh->sockname))[1]; } sub sockport { @_ == 1 or croak 'usage: $fh->sockport()'; my($fh) = @_; (sockaddr_in($fh->sockname))[0]; } sub sockhost { @_ == 1 or croak 'usage: $fh->sockhost()'; my($fh) = @_; inet_ntoa($fh->sockaddr); } sub peeraddr { @_ == 1 or croak 'usage: $fh->peeraddr()'; my($fh) = @_; (sockaddr_in($fh->peername))[1]; } sub peerport { @_ == 1 or croak 'usage: $fh->peerport()'; my($fh) = @_; (sockaddr_in($fh->peername))[0]; } sub peerhost { @_ == 1 or croak 'usage: $fh->peerhost()'; my($fh) = @_; inet_ntoa($fh->peeraddr); } ## ## AF_UNIX ## package IO::Socket::UNIX; use strict; use vars qw(@ISA $VERSION); use Socket; use Carp; use Exporter; @ISA = qw(IO::Socket); IO::Socket::UNIX->register_domain( AF_UNIX ); =head2 IO::Socket::UNIX C provides a constructor to create an AF_UNIX domain socket and some related methods. The constructor can take the following options Type Type of socket (eg SOCK_STREAM or SOCK_DGRAM) Local Path to local fifo Peer Path to peer fifo Listen Create a listen socket =head2 METHODS =over 4 =item hostpath() Returns the pathname to the fifo at the local end =item peerpath() Returns the pathname to the fifo at the peer end =back =cut sub configure { my($fh,$arg) = @_; my($bport,$cport); my $type = $arg->{Type} || SOCK_STREAM; $fh->socket(AF_UNIX, $type, 0) or return undef; if(exists $arg->{Local}) { my $addr = sockaddr_un($arg->{Local}); $fh->bind($addr) or return undef; } if(exists $arg->{Listen}) { $fh->listen($arg->{Listen} || 5) or return undef; } elsif(exists $arg->{Peer}) { my $addr = sockaddr_un($arg->{Peer}); $fh->connect($addr) or return undef; } $fh; } sub hostpath { @_ == 1 or croak 'usage: $fh->hostpath()'; my $n = $_[0]->sockname || return undef; (sockaddr_un($n))[0]; } sub peerpath { @_ == 1 or croak 'usage: $fh->peerpath()'; my $n = $_[0]->peername || return undef; (sockaddr_un($n))[0]; } =head1 SEE ALSO L, L =head1 AUTHOR Graham Barr EFE =head1 COPYRIGHT Copyright (c) 1996 Graham Barr. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut 1; # Keep require happy