You are viewing the version of this documentation from Perl 5.14.1. View the latest version

CONTENTS

NAME

Locale::Codes - a distribution of modules to handle locale codes

DESCRIPTION

Locale::Codes is a distribution containing a set of modules. The modules each deal with different types of codes which identify parts of the locale including languages, countries, currency, etc.

Currently, the following modules are included:

Locale::Country

This includes support for country codes (such as those listed in ISO-3166) to specify the country.

Locale::Language

This includes support for language codes (such as those listed in ISO-639) to specify the language.

Locale::Currency

This includes support for currency codes (such as those listed in ISO-4217) to specify the currency.

Locale::Script

This includes support for script codes (such as those listed in ISO-15924) to specify the script.

Each module can support an arbitrary number of code sets, and it it not required that the relationship between these code sets be one-to-one. For example, the Locale::Country module supports code sets from ISO-3166 and the FIPS 10 standard, and they do not break the world down into exactly the same sets of countries. This does not cause any problem (though converting codes from ISO-3166 to FIPS or back will not work except for countries that are one-to-one).

All data in all of these modules comes directly from the original standards (or as close to direct as possible), so it should be up-to-date at the time of release.

I plan on releasing a new version a couple of times a year to incorporate any changes made in the standards. However, I don't always know about changes that occur, so if any of the standards change, and you want a new release sooner, just email me and I'll get one out.

NEW CODE SETS

I'm always open to suggestions for new code sets.

In order for me to add a code set, I want the following criteria to be met:

General-use code set

If a code set is not general use, I'm not likely to spend the time to add and support it.

An official source of data

I require an official (or at least, a NEARLY official) source where I can get the data on a regular basis.

Ideally, I'd only get data from an official source, but sometimes that is not possible. For example the ISO standards are not typically available for free, so I may have to get some of that data from alternate sources that I'm confident are getting their data from the official source.

As an example, I get some country data from the CIA World Factbook. Given the nature of the source, I'm sure they're updating data from the official sources and I consider it "nearly" official.

There are many 3rd party sites which maintain lists (many of which are actually in a more convenient form than the official sites). Unfortunately, I will reject most of them since I have no feel for how "official" they are.

A free source of the data

Obviously, the data must be free-of-charge. I'm not interested in paying for the data (and I'm not interested in the overhead of having someone else pay for the data for me).

A reliable source of data

The source of data must come from a source that I can reasonably expect to exist for the foreseeable future since I will be extremely reluctant to drop support for a data set once it's included.

I am also reluctant to accept data sent to me by an individual. Although I appreciate the offer, it is simply not practical to consider an individual contribution as a reliable source of data. The source should be an official agency of some sort.

These requirements are open to discussion. If you have a code set you'd like to see added, but which may not meet all of the above requirements, feel free to email me and we'll discuss it. Depending on circumstances, I may be willing to waive some of these criteria.

COMMON ALIASES

As of version 2.00, the modules supported common variants of names.

For example, Locale::Country supports variant names for countries, and a few of the most common ones are included in the data. The country code for "United States" is "us", so:

country2code('United States');
   => "us"

Now the following will also return 'us':

country2code('United States of America');
country2code('USA');

Any number of common aliases may be included in the data, in addition to the names that come directly from the standards. If you have a common alias for a country, language, or any other of the types of codes, let me know and I'll add it, with some restrictions.

For example, the country name "North Korea" never appeared in any of the official sources (instead, it was "Korea, North" or "Korea, Democratic People's Republic of". I would honor a request to add an alias "North Korea" since that's a very common way to specify the country (please don't request this... I've already added it).

On the other hand, a request to add Zaire as an alias for "Congo, The Democratic Republic of" may not be honored. The country's official name is not Zaire, so adding it as an alias violates the standard. Zaire was kept as an alias in versions prior to 3.00, but it has been removed. Other aliases (if any) which no longer appear in any standard have also been removed.

ROUTINES

As of 3.10, the interface for all of the modules listed above are identical (as a matter of fact, they are all just wrappers around a central module which does all the real work).

In order to maintain the documentation for the modules consistently, the functions are all documented here, rather than in the documentation for the separate modules.

The name of the function depends on the module. For example, every module contains a function "code2XXX" where XXX refers to the type of data (country, language, currency, or script). So, the Locale::Country module contains the function code2country, the Locale::Language module contains the function code2language, etc.

In all of the functions below, CODE refers to a code for one element in the code set. For example, in the two-letter country codes from ISO 3166-1, the code 'fi' is used to refer to the country Finland. CODE is always case insensitive (though when a code is returned, it will always be in the case as used in the standard), so 'fi', 'FI', and 'Fi' would all be equivalent.

CODESET refers to a constant specified in the documentation for each module to label the various code sets. For example, in the Locale::Language module, CODESET could be LOCALE_CODE_ALPHA_2 or LOCALE_CODE_ALPHA_3 (among others). Most functions have a default one, so they do not need to be specified. So the following calls are valid:

code2country("fi");
code2country("fi",LOCALE_CODE_ALPHA_2);
code2country("fin",LOCALE_CODE_ALPHA_3);

Since LOCALE_CODE_ALPHA_2 is the default code set, the first two are identical.

code2country ( CODE [,CODESET] )
code2language( CODE [,CODESET] )
code2currency( CODE [,CODESET] )
code2script ( CODE [,CODESET] )

These functions take a code and returns a string which contains the name of the element identified. If the code is not a valid code in the CODESET specified then undef will be returned.

The name of the element is the name as specified in the standard, and as a result, different variations of an element name may be returned for different values of CODESET.

For example, the alpha-2 country code set defines the two-letter code "bo" to be "Bolivia, Plurinational State of", whereas the alpha-3 code set defines the code 'bol' to be the country "Bolivia (Plurinational State of)". So:

code2country('bo',LOCALE_CODE_ALPHA_2);
   => 'Bolivia, Plurinational State of'

code2country('bol',LOCALE_CODE_ALPHA_3);
   => 'Bolivia (Plurinational State of)'
country2code ( NAME [,CODESET] )
language2code( NAME [,CODESET] )
currency2code( NAME [,CODESET] )
script2code ( NAME [,CODESET] )

These functions takes the name of an element (or any of it's aliases) and returns the code that corresponds to it, if it exists. If NAME could not be identified as the name of one of the elements, then undef will be returned.

The name is not case sensitive. Also, any known variation of a name may be passed in.

For example, even though the country name returned using LOCALE_CODE_ALPHA_2 and LOCALE_CODE_ALPHA_3 country codes for Bolivia is different, either country name may be passed in since for each code set, in addition to the alias 'Bolivia'. So:

country2code('Bolivia, Plurinational State of',
             LOCALE_CODE_ALPHA_2);
   => bo

country2code('Bolivia (Plurinational State of)',
             LOCALE_CODE_ALPHA_2);
   => bo

country2code('Bolivia',LOCALE_CODE_ALPHA_2);
   => bo
country_code2code ( CODE ,CODESET ,CODESET2 )
language_code2code( CODE ,CODESET ,CODESET2 )
currency_code2code( CODE ,CODESET ,CODESET2 )
script_code2code ( CODE ,CODESET ,CODESET2 )

These functions takes a a code from one code set, and returns the corresponding code from another code set. CODE must exists in the code set specified by CODESET and must have a corresponding code in the code set specified by CODESET2 or undef will be returned.

Both CODESETs must be explicitly entered.

country_code2code('fin', LOCALE_CODE_ALPHA_3,
                  LOCALE_CODE_ALPHA_2);
   => 'fi'
all_country_codes ( [CODESET] )
all_language_codes( [CODESET] )
all_currency_codes( [CODESET] )
all_script_codes ( [CODESET] )

These returns a list of all code in the code set. The codes will be sorted.

all_country_names ( [CODESET] )
all_language_names( [CODESET] )
all_currency_names( [CODESET] )
all_script_names ( [CODESET] )

These return a list of all elements names for which there is a corresponding code in the specified code set.

The names returned are exactly as they are specified in the standard, and are sorted.

Since not all elements are listed in all code sets, the list of elements may differ depending on the code set specified.

SEMI-PRIVATE ROUTINES

Additional semi-private routines which may be used to modify the internal data are also available. Given their status, they aren't exported, and so need to be called by prefixing the function name with the package name.

Locale::Country::rename_country ( CODE ,NEW_NAME [,CODESET] )
Locale::Language::rename_language( CODE ,NEW_NAME [,CODESET] )
Locale::Currency::rename_currency( CODE ,NEW_NAME [,CODESET] )
Locale::Script::rename_script ( CODE ,NEW_NAME [,CODESET] )

These routines are used to change the official name of an element. At that point, the name returned by the code2XXX routine would be NEW_NAME instead of the name specified in the standard.

The original name will remain as an alias.

For example, the official country name for code 'gb' is 'United Kingdom'. If you want to change that, you might call:

Locale::Country::rename_country('gb', 'Great Britain');

This means that calling code2country('gb') will now return 'Great Britain' instead of 'United Kingdom'.

If any error occurs, a warning is issued and 0 is returned. An error occurs if CODE doesn't exist in the specified code set, or if NEW_NAME is already in use but for a different element.

If the routine succeeds, 1 is returned.

Locale::Country::add_country ( CODE ,NAME [,CODESET] )
Locale::Language::add_language( CODE ,NAME [,CODESET] )
Locale::Currency::add_currency( CODE ,NAME [,CODESET] )
Locale::Script::add_script ( CODE ,NAME [,CODESET] )

These routines are used to add a new code and name to the data.

Both CODE and NAME must be unused in the data set or an error occurs (though NAME may be used in a different data set).

For example, to create the fictitious country named "Duchy of Grand Fenwick" with codes "gf" and "fen", use the following:

Locale::Country::add_country("fe","Duchy of Grand Fenwick",
                             LOCALE_CODE_ALPHA_2);

Locale::Country::add_country("fen","Duchy of Grand Fenwick",
                             LOCALE_CODE_ALPHA_3);

The return value is 1 on success, 0 on an error.

Locale::Country::delete_country ( CODE [,CODESET] )
Locale::Language::delete_language( CODE [,CODESET] )
Locale::Currency::delete_currency( CODE [,CODESET] )
Locale::Script::delete_script ( CODE [,CODESET] )

These routines are used to delete a code from the data.

CODE must refer to an existing code in the code set.

The return value is 1 on success, 0 on an error.

Locale::Country::add_country_alias ( NAME ,NEW_NAME )
Locale::Language::add_language_alias( NAME ,NEW_NAME )
Locale::Currency::add_currency_alias( NAME ,NEW_NAME )
Locale::Script::add_script_alias ( NAME ,NEW_NAME )

These routines are used to add a new alias to the data. They do not alter the return value of the code2XXX function.

NAME must be an existing element name, and NEW_NAME must be unused or an error occurs.

The return value is 1 on success, 0 on an error.

Locale::Country::delete_country_alias ( NAME )
Locale::Language::delete_language_alias( NAME )
Locale::Currency::delete_currency_alias( NAME )
Locale::Script::delete_script_alias ( NAME )

These routines are used to delete an alias from the data. Once removed, the element may not be referred to by NAME.

NAME must be one of a list of at least two names that may be used to specify an element. If the element may only be referred to by a single name, you'll need to use the add_XXX_alias function to add a new alias first, or the remove_XXX function to remove the element entirely.

If the alias is used as the name in any code set, one of the other names will be used instead. Predicting exactly which one will be used requires you to know the order in which the standards were read, which is not reliable, so you may want to use the rename_XXX function to force one of the alternate names to be used.

The return value is 1 on success, 0 on an error.

Locale::Country::rename_country_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Language::rename_language_code( CODE ,NEW_CODE [,CODESET] )
Locale::Currency::rename_currency_code( CODE ,NEW_CODE [,CODESET] )
Locale::Script::rename_script_code ( CODE ,NEW_CODE [,CODESET] )

These routines are used to change the official code for an element. At that point, the code returned by the XXX2code routine would be NEW_CODE instead of the code specified in the standard.

NEW_CODE may either be a code that is not in use, or it may be an alias for CODE (in which case, CODE becomes and alias and NEW_CODE becomes the "real" code).

The original code is kept as an alias, so that the code2XXX routines will work with either the code from the standard or the new code.

However, the all_XXX_codes routine will only return the codes which are considered "real" (which means that the list of codes will now contain NEW_CODE, but will not contain CODE).

Locale::Country::add_country_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Language::add_language_code_alias( CODE ,NEW_CODE [,CODESET] )
Locale::Currency::add_currency_code_alias( CODE ,NEW_CODE [,CODESET] )
Locale::Script::add_script_code_alias ( CODE ,NEW_CODE [,CODESET] )

These routines add an alias for the code. At that point, NEW_CODE and CODE will both work in the code2XXX routines. However, the XXX2code routines will still return the original code.

Locale::Country::delete_country_code_alias ( CODE [,CODESET] )
Locale::Language::delete_language_code_alias( CODE [,CODESET] )
Locale::Currency::delete_currency_code_alias( CODE [,CODESET] )
Locale::Script::delete_script_code_alias ( CODE [,CODESET] )

These routines delete an alias for the code.

These will only work if CODE is actually an alias. If it is the "real" code, it will not be deleted. You will need to use the rename_XXX_code function to switch the real code with one of the aliases, and then delete the alias.

KNOWN BUGS AND LIMITATIONS

*

Because each code set uses a slightly different list of elements, and they are not necessarily one-to-one, there may be some confusion about the relationship between codes from different code sets.

For example, ISO 3166 assigns one code to the country "United States Minor Outlying Islands", but the FIPS 10 codes give different codes to different islands (Baker Island, Howland Island, etc.).

This may cause some confusion... I've done the best that I could do to minimize it.

*

Currently all names must be all ASCII. I plan on relaxing that limitation in the future.

SEE ALSO

Locale::Constants

Constants for Locale codes.

Locale::Country

Codes for identification of countries.

Locale::Language

Codes for identification of languages.

Locale::Script

Codes for identification of scripts.

Locale::Currency

Codes for identification of currencies and funds.

AUTHOR

Locale::Country and Locale::Language were originally written by Neil Bowers at the Canon Research Centre Europe (CRE). They maintained the distribution from 1997 to 2001.

Locale::Currency was originally written by Michael Hennecke.

From 2001 to 2004, maintenance was continued by Neil Bowers. He modified Locale::Currency for inclusion in the distribution. He also added Locale::Constants and Locale::Script.

From 2004-2009, the module was unmaintained.

In 2010, maintenance was taken over by Sullivan Beck (sbeck@cpan.org) with Neil Bower's permission.

COPYRIGHT

Copyright (c) 1997-2001 Canon Research Centre Europe (CRE).
Copyright (c) 2001      Michael Hennecke (Locale::Currency)
Copyright (c) 2001-2010 Neil Bowers
Copyright (c) 2010-2011 Sullivan Beck

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.