NAME
local::lib - create and use a local lib/ for perl modules with PERL5LIB
SYNOPSIS
In code -
use
local
::lib;
# sets up a local lib at ~/perl5
use
local
::lib
'~/foo'
;
# same, but ~/foo
# Or...
use
FindBin;
use
local
::lib
"$FindBin::Bin/../support"
;
# app-local support library
From the shell -
# Install LWP and its missing dependencies to the '~/perl5' directory
perl -MCPAN -Mlocal::lib -e
'CPAN::install(LWP)'
# Just print out useful shell commands
$ perl -Mlocal::lib
PERL_MB_OPT=
'--install_base /home/username/perl5'
; export PERL_MB_OPT;
PERL_MM_OPT=
'INSTALL_BASE=/home/username/perl5'
; export PERL_MM_OPT;
PERL5LIB=
"/home/username/perl5/lib/perl5"
; export PERL5LIB;
PATH=
"/home/username/perl5/bin:$PATH"
; export PATH;
PERL_LOCAL_LIB_ROOT=
"/home/usename/perl5:$PERL_LOCAL_LIB_ROOT"
; export PERL_LOCAL_LIB_ROOT;
From a .bash_profile or .bashrc file -
eval
"$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)"
The bootstrapping technique
A typical way to install local::lib is using what is known as the "bootstrapping" technique. You would do this if your system administrator hasn't already installed local::lib. In this case, you'll need to install local::lib in your home directory.
Even if you do have administrative privileges, you will still want to set up your environment variables, as discussed in step 4. Without this, you would still install the modules into the system CPAN installation and also your Perl scripts will not use the lib/ path you bootstrapped with local::lib.
By default local::lib installs itself and the CPAN modules into ~/perl5.
Windows users must also see "Differences when using this module under Win32".
Download and unpack the local::lib tarball from CPAN (search for "Download" on the CPAN page about local::lib). Do this as an ordinary user, not as root or administrator. Unpack the file in your home directory or in any other convenient location.
Run this:
perl Makefile.PL --bootstrap
If the system asks you whether it should automatically configure as much as possible, you would typically answer yes.
Run this: (local::lib assumes you have make installed on your system)
make test && make install
Now we need to setup the appropriate environment variables, so that Perl starts using our newly generated lib/ directory. If you are using bash or any other Bourne shells, you can add this to your shell startup script this way:
echo
'eval "$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)"'
>>~/.bashrc
If you are using C shell, you can do this as follows:
% echo
$SHELL
/bin/csh
$ echo
'eval `perl -I$HOME/perl5/lib/perl5 -Mlocal::lib`'
>> ~/.cshrc
After writing your shell configuration file, be sure to re-read it to get the changed settings into your current shell's environment. Bourne shells use
. ~/.bashrc
for this, whereas C shells usesource ~/.cshrc
.
Bootstrapping into an alternate directory
In order to install local::lib into a directory other than the default, you need to specify the name of the directory when you call bootstrap. Then, when setting up the environment variables, both perl and local::lib must be told the location of the bootstrap directory. The setup process would look as follows:
perl Makefile.PL --bootstrap=~/foo
make test && make install
echo
'eval "$(perl -I$HOME/foo/lib/perl5 -Mlocal::lib=$HOME/foo)"'
>>~/.bashrc
. ~/.bashrc
Other bootstrapping options
If you're on a slower machine, or are operating under draconian disk space limitations, you can disable the automatic generation of manpages from POD when installing modules by using the --no-manpages
argument when bootstrapping:
perl Makefile.PL --bootstrap --
no
-manpages
To avoid doing several bootstrap for several Perl module environments on the same account, for example if you use it for several different deployed applications independently, you can use one bootstrapped local::lib installation to install modules in different directories directly this way:
cd ~/mydir1
perl -Mlocal::lib=./
eval
$(perl -Mlocal::lib=./)
### To set the environment for this shell alone
printenv
### You will see that ~/mydir1 is in the PERL5LIB
perl -MCPAN -e install ...
### whatever modules you want
cd ../mydir2
... REPEAT ...
If you use .bashrc to activate a local::lib automatically, the local::lib will be re-enabled in any sub-shells used, overriding adjustments you may have made in the parent shell. To avoid this, you can initialize the local::lib in .bash_profile rather than .bashrc, or protect the local::lib invocation with a $SHLVL
check:
[
$SHLVL
-eq 1 ] &&
eval
"$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)"
If you are working with several local::lib
environments, you may want to remove some of them from the current environment without disturbing the others. You can deactivate one environment like this (using bourne sh):
eval
$(perl -Mlocal::lib=--deactivate,~/path)
which will generate and run the commands needed to remove ~/path
from your various search paths. Whichever environment was activated most recently will remain the target for module installations. That is, if you activate ~/path_A
and then you activate ~/path_B
, new modules you install will go in ~/path_B
. If you deactivate ~/path_B
then modules will be installed into ~/pathA
-- but if you deactivate ~/path_A
then they will still be installed in ~/pathB
because pathB was activated later.
You can also ask local::lib
to clean itself completely out of the current shell's environment with the --deactivate-all
option. For multiple environments for multiple apps you may need to include a modified version of the use FindBin
instructions in the "In code" sample above. If you did something like the above, you have a set of Perl modules at ~/mydir1/lib
. If you have a script at ~/mydir1/scripts/myscript.pl
, you need to tell it where to find the modules you installed for it at ~/mydir1/lib
.
In ~/mydir1/scripts/myscript.pl
:
Put this before any BEGIN { ... } blocks that require the modules you installed.
Differences when using this module under Win32
To set up the proper environment variables for your current session of CMD.exe
, you can use this:
C:\>perl -Mlocal::lib
set PERL_MB_OPT=--install_base C:\DOCUME~1\ADMINI~1\perl5
set PERL_MM_OPT=INSTALL_BASE=C:\DOCUME~1\ADMINI~1\perl5
set PERL5LIB=C:\DOCUME~1\ADMINI~1\perl5\lib\perl5
set PATH=C:\DOCUME~1\ADMINI~1\perl5\bin;
%PATH
%
### To set the environment for this shell alone
C:\>perl -Mlocal::lib >
%TEMP
%\tmp.bat &&
%TEMP
%\tmp.bat && del
%TEMP
%\tmp.bat
### instead of $(perl -Mlocal::lib=./)
If you want the environment entries to persist, you'll need to add them to the Control Panel's System applet yourself or use App::local::lib::Win32Helper.
The "~" is translated to the user's profile directory (the directory named for the user under "Documents and Settings" (Windows XP or earlier) or "Users" (Windows Vista or later)) unless $ENV{HOME} exists. After that, the home directory is translated to a short name (which means the directory must exist) and the subdirectories are created.
PowerShell
local::lib also supports PowerShell, and can be used with the Invoke-Expression
cmdlet.
Invoke-Expression
"$(perl -Mlocal::lib)"
RATIONALE
The version of a Perl package on your machine is not always the version you need. Obviously, the best thing to do would be to update to the version you need. However, you might be in a situation where you're prevented from doing this. Perhaps you don't have system administrator privileges; or perhaps you are using a package management system such as Debian, and nobody has yet gotten around to packaging up the version you need.
local::lib solves this problem by allowing you to create your own directory of Perl packages downloaded from CPAN (in a multi-user system, this would typically be within your own home directory). The existing system Perl installation is not affected; you simply invoke Perl with special options so that Perl uses the packages in your own local package directory rather than the system packages. local::lib arranges things so that your locally installed version of the Perl packages takes precedence over the system installation.
If you are using a package management system (such as Debian), you don't need to worry about Debian and CPAN stepping on each other's toes. Your local version of the packages will be written to an entirely separate directory from those installed by Debian.
DESCRIPTION
This module provides a quick, convenient way of bootstrapping a user-local Perl module library located within the user's home directory. It also constructs and prints out for the user the list of environment variables using the syntax appropriate for the user's current shell (as specified by the SHELL
environment variable), suitable for directly adding to one's shell configuration file.
More generally, local::lib allows for the bootstrapping and usage of a directory containing Perl modules outside of Perl's @INC
. This makes it easier to ship an application with an app-specific copy of a Perl module, or collection of modules. Useful in cases like when an upstream maintainer hasn't applied a patch to a module of theirs that you need for your application.
On import, local::lib sets the following environment variables to appropriate values:
When possible, these will be appended to instead of overwritten entirely.
These values are then available for reference by any code after import.
CREATING A SELF-CONTAINED SET OF MODULES
See lib::core::only for one way to do this - but note that there are a number of caveats, and the best approach is always to perform a build against a clean perl (i.e. site and vendor as close to empty as possible).
IMPORT OPTIONS
Options are values that can be passed to the local::lib
import besides the directory to use. They are specified as use local::lib '--option'[, path];
or perl -Mlocal::lib=--option[,path]
.
--deactivate
Remove the chosen path (or the default path) from the module search paths if it was added by local::lib
, instead of adding it.
--deactivate-all
Remove all directories that were added to search paths by local::lib
from the search paths.
--quiet
Don't output any messages about directories being created.
--always
Always add directories to environment variables, ignoring if they are already included.
--shelltype
Specify the shell type to use for output. By default, the shell will be detected based on the environment. Should be one of: bourne
, csh
, cmd
, or powershell
.
--no-create
Prevents local::lib
from creating directories when activating dirs. This is likely to cause issues on Win32 systems.
CLASS METHODS
ensure_dir_structure_for
Attempts to create a local::lib directory, including subdirectories and all required parent directories. Throws an exception on failure.
print_environment_vars_for
Prints to standard output the variables listed above, properly set to use the given path as the base directory.
build_environment_vars_for
Returns a hash with the variables listed above, properly set to use the given path as the base directory.
setup_env_hash_for
Constructs the %ENV
keys for the given path, by calling "build_environment_vars_for".
active_paths
Returns a list of active local::lib
paths, according to the PERL_LOCAL_LIB_ROOT
environment variable and verified against what is really in @INC
.
install_base_perl_path
Returns a path describing where to install the Perl modules for this local library installation. Appends the directories lib
and perl5
to the given path.
lib_paths_for
Returns the list of paths perl will search for libraries, given a base path. This includes the base path itself, the architecture specific subdirectory, and perl version specific subdirectories. These paths may not all exist.
install_base_bin_path
Returns a path describing where to install the executable programs for this local library installation. Appends the directory bin
to the given path.
installer_options_for
Returns a hash of environment variables that should be set to cause installation into the given path.
resolve_empty_path
Builds and returns the base path into which to set up the local module installation. Defaults to ~/perl5
.
resolve_home_path
Attempts to find the user's home directory. If no definite answer is available, throws an exception.
resolve_relative_path
Translates the given path into an absolute path.
resolve_path
Calls the following in a pipeline, passing the result from the previous to the next, in an attempt to find where to configure the environment for a local library installation: "resolve_empty_path", "resolve_home_path", "resolve_relative_path". Passes the given path argument to "resolve_empty_path" which then returns a result that is passed to "resolve_home_path", which then has its result passed to "resolve_relative_path". The result of this final call is returned from "resolve_path".
OBJECT INTERFACE
new
Constructs a new local::lib
object, representing the current state of @INC
and the relevant environment variables.
ATTRIBUTES
roots
An arrayref representing active local::lib
directories.
inc
An arrayref representing @INC
.
libs
An arrayref representing the PERL5LIB environment variable.
bins
An arrayref representing the PATH environment variable.
extra
A hashref of extra environment variables (e.g. PERL_MM_OPT
and PERL_MB_OPT
)
no_create
If set, local::lib
will not try to create directories when activating them.
OBJECT METHODS
clone
Constructs a new local::lib
object based on the existing one, overriding the specified attributes.
activate
Constructs a new instance with the specified path active.
deactivate
Constructs a new instance with the specified path deactivated.
deactivate_all
Constructs a new instance with all local::lib
directories deactivated.
environment_vars_string
Returns a string to set up the local::lib
, meant to be run by a shell.
build_environment_vars
Returns a hash with the variables listed above, properly set to use the given path as the base directory.
setup_env_hash
Constructs the %ENV
keys for the given path, by calling "build_environment_vars".
setup_local_lib
Constructs the %ENV
hash using "setup_env_hash", and set up @INC
.
A WARNING ABOUT UNINST=1
Be careful about using local::lib in combination with "make install UNINST=1". The idea of this feature is that will uninstall an old version of a module before installing a new one. However it lacks a safety check that the old version and the new version will go in the same directory. Used in combination with local::lib, you can potentially delete a globally accessible version of a module while installing the new version in a local place. Only combine "make install UNINST=1" and local::lib if you understand these possible consequences.
LIMITATIONS
Directory names with spaces in them are not well supported by the perl toolchain and the programs it uses. Pure-perl distributions should support spaces, but problems are more likely with dists that require compilation. A workaround you can do is moving your local::lib to a directory with spaces after you installed all modules inside your local::lib bootstrap. But be aware that you can't update or install CPAN modules after the move.
Rather basic shell detection. Right now anything with csh in its name is assumed to be a C shell or something compatible, and everything else is assumed to be Bourne, except on Win32 systems. If the
SHELL
environment variable is not set, a Bourne-compatible shell is assumed.Kills any existing PERL_MM_OPT or PERL_MB_OPT.
Should probably auto-fixup CPAN config if not already done.
On VMS and MacOS Classic (pre-OS X), local::lib loads File::Spec. This means any File::Spec version installed in the local::lib will be ignored by scripts using local::lib. A workaround for this is using
use lib "$local_lib/lib/perl5";
instead of usinglocal::lib
directly.Conflicts with ExtUtils::MakeMaker's
PREFIX
option.local::lib
uses theINSTALL_BASE
option, as it has more predictable and sane behavior. If something attempts to use thePREFIX
option when running a Makefile.PL, ExtUtils::MakeMaker will refuse to run, as the two options conflict. This can be worked around by temporarily unsetting thePERL_MM_OPT
environment variable.Conflicts with Module::Build's
--prefix
option. Similar to the previous limitation, but any--prefix
option specified will be ignored. This can be worked around by temporarily unsetting thePERL_MB_OPT
environment variable.
Patches very much welcome for any of the above.
On Win32 systems, does not have a way to write the created environment variables to the registry, so that they can persist through a reboot.
TROUBLESHOOTING
If you've configured local::lib to install CPAN modules somewhere in to your home directory, and at some point later you try to install a module with cpan -i Foo::Bar
, but it fails with an error like: Warning: You do not have permissions to install into /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux at /usr/lib64/perl5/5.8.8/Foo/Bar.pm
and buried within the install log is an error saying 'INSTALL_BASE' is not a known MakeMaker parameter name
, then you've somehow lost your updated ExtUtils::MakeMaker module.
To remedy this situation, rerun the bootstrapping procedure documented above.
Then, run rm -r ~/.cpan/build/Foo-Bar*
Finally, re-run cpan -i Foo::Bar
and it should install without problems.
ENVIRONMENT
- SHELL
- COMSPEC
-
local::lib looks at the user's
SHELL
environment variable when printing out commands to add to the shell configuration file.On Win32 systems,
COMSPEC
is also examined.
SEE ALSO
SUPPORT
IRC:
Join
#toolchain on irc.perl.org.
AUTHOR
Matt S Trout <mst@shadowcat.co.uk> http://www.shadowcat.co.uk/
auto_install fixes kindly sponsored by http://www.takkle.com/
CONTRIBUTORS
Patches to correctly output commands for csh style shells, as well as some documentation additions, contributed by Christopher Nehren <apeiron@cpan.org>.
Doc patches for a custom local::lib directory, more cleanups in the english documentation and a german documentation contributed by Torsten Raudssus <torsten@raudssus.de>.
Hans Dieter Pearcey <hdp@cpan.org> sent in some additional tests for ensuring things will install properly, submitted a fix for the bug causing problems with writing Makefiles during bootstrapping, contributed an example program, and submitted yet another fix to ensure that local::lib can install and bootstrap properly. Many, many thanks!
pattern of Freenode IRC contributed the beginnings of the Troubleshooting section. Many thanks!
Patch to add Win32 support contributed by Curtis Jewell <csjewell@cpan.org>.
Warnings for missing PATH/PERL5LIB (as when not running interactively) silenced by a patch from Marco Emilio Poleggi.
Mark Stosberg <mark@summersault.com> provided the code for the now deleted '--self-contained' option.
Documentation patches to make win32 usage clearer by David Mertens <dcmertens.perl@gmail.com> (run4flat).
Brazilian portuguese translation and minor doc patches contributed by Breno G. de Oliveira <garu@cpan.org>.
Improvements to stacking multiple local::lib dirs and removing them from the environment later on contributed by Andrew Rodland <arodland@cpan.org>.
Patch for Carp version mismatch contributed by Hakim Cassimally <osfameron@cpan.org>.
Rewrite of internals and numerous bug fixes and added features contributed by Graham Knop <haarg@haarg.org>.
COPYRIGHT
Copyright (c) 2007 - 2013 the local::lib "AUTHOR" and "CONTRIBUTORS" as listed above.
LICENSE
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.