package Math::BigInt; # # "Mike had an infinite amount to do and a negative amount of time in which # to do it." - Before and After # # The following hash values are used: # value: unsigned int with actual value (as a Math::BigInt::Calc or similar) # sign : +,-,NaN,+inf,-inf # _a : accuracy # _p : precision # _f : flags, used by MBF to flag parts of a float as untouchable # Remember not to take shortcuts ala $xs = $x->{value}; $CALC->foo($xs); since # underlying lib might change the reference! my $class = "Math::BigInt"; use 5.006002; $VERSION = '1.9991'; @ISA = qw(Exporter); @EXPORT_OK = qw(objectify bgcd blcm); # _trap_inf and _trap_nan are internal and should never be accessed from the # outside use vars qw/$round_mode $accuracy $precision $div_scale $rnd_mode $upgrade $downgrade $_trap_nan $_trap_inf/; use strict; # Inside overload, the first arg is always an object. If the original code had # it reversed (like $x = 2 * $y), then the third parameter is true. # In some cases (like add, $x = $x + 2 is the same as $x = 2 + $x) this makes # no difference, but in some cases it does. # For overloaded ops with only one argument we simple use $_[0]->copy() to # preserve the argument. # Thus inheritance of overload operators becomes possible and transparent for # our subclasses without the need to repeat the entire overload section there. # We register ops that are not registerable yet, so suppress warnings { no warnings; use overload '=' => sub { $_[0]->copy(); }, # some shortcuts for speed (assumes that reversed order of arguments is routed # to normal '+' and we thus can always modify first arg. If this is changed, # this breaks and must be adjusted.) '+=' => sub { $_[0]->badd($_[1]); }, '-=' => sub { $_[0]->bsub($_[1]); }, '*=' => sub { $_[0]->bmul($_[1]); }, '/=' => sub { scalar $_[0]->bdiv($_[1]); }, '%=' => sub { $_[0]->bmod($_[1]); }, '^=' => sub { $_[0]->bxor($_[1]); }, '&=' => sub { $_[0]->band($_[1]); }, '|=' => sub { $_[0]->bior($_[1]); }, '**=' => sub { $_[0]->bpow($_[1]); }, '<<=' => sub { $_[0]->blsft($_[1]); }, '>>=' => sub { $_[0]->brsft($_[1]); }, # not supported by Perl yet '..' => \&_pointpoint, '<=>' => sub { my $rc = $_[2] ? ref($_[0])->bcmp($_[1],$_[0]) : $_[0]->bcmp($_[1]); $rc = 1 unless defined $rc; $rc <=> 0; }, # we need '>=' to get things like "1 >= NaN" right: '>=' => sub { my $rc = $_[2] ? ref($_[0])->bcmp($_[1],$_[0]) : $_[0]->bcmp($_[1]); # if there was a NaN involved, return false return '' unless defined $rc; $rc >= 0; }, 'cmp' => sub { $_[2] ? "$_[1]" cmp $_[0]->bstr() : $_[0]->bstr() cmp "$_[1]" }, 'cos' => sub { $_[0]->copy->bcos(); }, 'sin' => sub { $_[0]->copy->bsin(); }, 'atan2' => sub { $_[2] ? ref($_[0])->new($_[1])->batan2($_[0]) : $_[0]->copy()->batan2($_[1]) }, # are not yet overloadable #'hex' => sub { print "hex"; $_[0]; }, #'oct' => sub { print "oct"; $_[0]; }, # log(N) is log(N, e), where e is Euler's number 'log' => sub { $_[0]->copy()->blog($_[1], undef); }, 'exp' => sub { $_[0]->copy()->bexp($_[1]); }, 'int' => sub { $_[0]->copy(); }, 'neg' => sub { $_[0]->copy()->bneg(); }, 'abs' => sub { $_[0]->copy()->babs(); }, 'sqrt' => sub { $_[0]->copy()->bsqrt(); }, '~' => sub { $_[0]->copy()->bnot(); }, # for subtract it's a bit tricky to not modify b: b-a => -a+b '-' => sub { my $c = $_[0]->copy; $_[2] ? $c->bneg()->badd( $_[1]) : $c->bsub( $_[1]) }, '+' => sub { $_[0]->copy()->badd($_[1]); }, '*' => sub { $_[0]->copy()->bmul($_[1]); }, '/' => sub { $_[2] ? ref($_[0])->new($_[1])->bdiv($_[0]) : $_[0]->copy->bdiv($_[1]); }, '%' => sub { $_[2] ? ref($_[0])->new($_[1])->bmod($_[0]) : $_[0]->copy->bmod($_[1]); }, '**' => sub { $_[2] ? ref($_[0])->new($_[1])->bpow($_[0]) : $_[0]->copy->bpow($_[1]); }, '<<' => sub { $_[2] ? ref($_[0])->new($_[1])->blsft($_[0]) : $_[0]->copy->blsft($_[1]); }, '>>' => sub { $_[2] ? ref($_[0])->new($_[1])->brsft($_[0]) : $_[0]->copy->brsft($_[1]); }, '&' => sub { $_[2] ? ref($_[0])->new($_[1])->band($_[0]) : $_[0]->copy->band($_[1]); }, '|' => sub { $_[2] ? ref($_[0])->new($_[1])->bior($_[0]) : $_[0]->copy->bior($_[1]); }, '^' => sub { $_[2] ? ref($_[0])->new($_[1])->bxor($_[0]) : $_[0]->copy->bxor($_[1]); }, # can modify arg of ++ and --, so avoid a copy() for speed, but don't # use $_[0]->bone(), it would modify $_[0] to be 1! '++' => sub { $_[0]->binc() }, '--' => sub { $_[0]->bdec() }, # if overloaded, O(1) instead of O(N) and twice as fast for small numbers 'bool' => sub { # this kludge is needed for perl prior 5.6.0 since returning 0 here fails :-/ # v5.6.1 dumps on this: return !$_[0]->is_zero() || undef; :-( my $t = undef; $t = 1 if !$_[0]->is_zero(); $t; }, # the original qw() does not work with the TIESCALAR below, why? # Order of arguments unsignificant '""' => sub { $_[0]->bstr(); }, '0+' => sub { $_[0]->numify(); } ; } # no warnings scope ############################################################################## # global constants, flags and accessory # These vars are public, but their direct usage is not recommended, use the # accessor methods instead $round_mode = 'even'; # one of 'even', 'odd', '+inf', '-inf', 'zero', 'trunc' or 'common' $accuracy = undef; $precision = undef; $div_scale = 40; $upgrade = undef; # default is no upgrade $downgrade = undef; # default is no downgrade # These are internally, and not to be used from the outside at all $_trap_nan = 0; # are NaNs ok? set w/ config() $_trap_inf = 0; # are infs ok? set w/ config() my $nan = 'NaN'; # constants for easier life my $CALC = 'Math::BigInt::Calc'; # module to do the low level math # default is Calc.pm my $IMPORT = 0; # was import() called yet? # used to make require work my %WARN; # warn only once for low-level libs my %CAN; # cache for $CALC->can(...) my %CALLBACKS; # callbacks to notify on lib loads my $EMU_LIB = 'Math/BigInt/CalcEmu.pm'; # emulate low-level math ############################################################################## # the old code had $rnd_mode, so we need to support it, too $rnd_mode = 'even'; sub TIESCALAR { my ($class) = @_; bless \$round_mode, $class; } sub FETCH { return $round_mode; } sub STORE { $rnd_mode = $_[0]->round_mode($_[1]); } BEGIN { # tie to enable $rnd_mode to work transparently tie $rnd_mode, 'Math::BigInt'; # set up some handy alias names *as_int = \&as_number; *is_pos = \&is_positive; *is_neg = \&is_negative; } ############################################################################## sub round_mode { no strict 'refs'; # make Class->round_mode() work my $self = shift; my $class = ref($self) || $self || __PACKAGE__; if (defined $_[0]) { my $m = shift; if ($m !~ /^(even|odd|\+inf|\-inf|zero|trunc|common)$/) { require Carp; Carp::croak ("Unknown round mode '$m'"); } return ${"${class}::round_mode"} = $m; } ${"${class}::round_mode"}; } sub upgrade { no strict 'refs'; # make Class->upgrade() work my $self = shift; my $class = ref($self) || $self || __PACKAGE__; # need to set new value? if (@_ > 0) { return ${"${class}::upgrade"} = $_[0]; } ${"${class}::upgrade"}; } sub downgrade { no strict 'refs'; # make Class->downgrade() work my $self = shift; my $class = ref($self) || $self || __PACKAGE__; # need to set new value? if (@_ > 0) { return ${"${class}::downgrade"} = $_[0]; } ${"${class}::downgrade"}; } sub div_scale { no strict 'refs'; # make Class->div_scale() work my $self = shift; my $class = ref($self) || $self || __PACKAGE__; if (defined $_[0]) { if ($_[0] < 0) { require Carp; Carp::croak ('div_scale must be greater than zero'); } ${"${class}::div_scale"} = $_[0]; } ${"${class}::div_scale"}; } sub accuracy { # $x->accuracy($a); ref($x) $a # $x->accuracy(); ref($x) # Class->accuracy(); class # Class->accuracy($a); class $a my $x = shift; my $class = ref($x) || $x || __PACKAGE__; no strict 'refs'; # need to set new value? if (@_ > 0) { my $a = shift; # convert objects to scalars to avoid deep recursion. If object doesn't # have numify(), then hopefully it will have overloading for int() and # boolean test without wandering into a deep recursion path... $a = $a->numify() if ref($a) && $a->can('numify'); if (defined $a) { # also croak on non-numerical if (!$a || $a <= 0) { require Carp; Carp::croak ('Argument to accuracy must be greater than zero'); } if (int($a) != $a) { require Carp; Carp::croak ('Argument to accuracy must be an integer'); } } if (ref($x)) { # $object->accuracy() or fallback to global $x->bround($a) if $a; # not for undef, 0 $x->{_a} = $a; # set/overwrite, even if not rounded delete $x->{_p}; # clear P $a = ${"${class}::accuracy"} unless defined $a; # proper return value } else { ${"${class}::accuracy"} = $a; # set global A ${"${class}::precision"} = undef; # clear global P } return $a; # shortcut } my $a; # $object->accuracy() or fallback to global $a = $x->{_a} if ref($x); # but don't return global undef, when $x's accuracy is 0! $a = ${"${class}::accuracy"} if !defined $a; $a; } sub precision { # $x->precision($p); ref($x) $p # $x->precision(); ref($x) # Class->precision(); class # Class->precision($p); class $p my $x = shift; my $class = ref($x) || $x || __PACKAGE__; no strict 'refs'; if (@_ > 0) { my $p = shift; # convert objects to scalars to avoid deep recursion. If object doesn't # have numify(), then hopefully it will have overloading for int() and # boolean test without wandering into a deep recursion path... $p = $p->numify() if ref($p) && $p->can('numify'); if ((defined $p) && (int($p) != $p)) { require Carp; Carp::croak ('Argument to precision must be an integer'); } if (ref($x)) { # $object->precision() or fallback to global $x->bfround($p) if $p; # not for undef, 0 $x->{_p} = $p; # set/overwrite, even if not rounded delete $x->{_a}; # clear A $p = ${"${class}::precision"} unless defined $p; # proper return value } else { ${"${class}::precision"} = $p; # set global P ${"${class}::accuracy"} = undef; # clear global A } return $p; # shortcut } my $p; # $object->precision() or fallback to global $p = $x->{_p} if ref($x); # but don't return global undef, when $x's precision is 0! $p = ${"${class}::precision"} if !defined $p; $p; } sub config { # return (or set) configuration data as hash ref my $class = shift || 'Math::BigInt'; no strict 'refs'; if (@_ > 1 || (@_ == 1 && (ref($_[0]) eq 'HASH'))) { # try to set given options as arguments from hash my $args = $_[0]; if (ref($args) ne 'HASH') { $args = { @_ }; } # these values can be "set" my $set_args = {}; foreach my $key ( qw/trap_inf trap_nan upgrade downgrade precision accuracy round_mode div_scale/ ) { $set_args->{$key} = $args->{$key} if exists $args->{$key}; delete $args->{$key}; } if (keys %$args > 0) { require Carp; Carp::croak ("Illegal key(s) '", join("','",keys %$args),"' passed to $class\->config()"); } foreach my $key (keys %$set_args) { if ($key =~ /^trap_(inf|nan)\z/) { ${"${class}::_trap_$1"} = ($set_args->{"trap_$1"} ? 1 : 0); next; } # use a call instead of just setting the $variable to check argument $class->$key($set_args->{$key}); } } # now return actual configuration my $cfg = { lib => $CALC, lib_version => ${"${CALC}::VERSION"}, class => $class, trap_nan => ${"${class}::_trap_nan"}, trap_inf => ${"${class}::_trap_inf"}, version => ${"${class}::VERSION"}, }; foreach my $key (qw/ upgrade downgrade precision accuracy round_mode div_scale /) { $cfg->{$key} = ${"${class}::$key"}; }; if (@_ == 1 && (ref($_[0]) ne 'HASH')) { # calls of the style config('lib') return just this value return $cfg->{$_[0]}; } $cfg; } sub _scale_a { # select accuracy parameter based on precedence, # used by bround() and bfround(), may return undef for scale (means no op) my ($x,$scale,$mode) = @_; $scale = $x->{_a} unless defined $scale; no strict 'refs'; my $class = ref($x); $scale = ${ $class . '::accuracy' } unless defined $scale; $mode = ${ $class . '::round_mode' } unless defined $mode; if (defined $scale) { $scale = $scale->can('numify') ? $scale->numify() : "$scale" if ref($scale); $scale = int($scale); } ($scale,$mode); } sub _scale_p { # select precision parameter based on precedence, # used by bround() and bfround(), may return undef for scale (means no op) my ($x,$scale,$mode) = @_; $scale = $x->{_p} unless defined $scale; no strict 'refs'; my $class = ref($x); $scale = ${ $class . '::precision' } unless defined $scale; $mode = ${ $class . '::round_mode' } unless defined $mode; if (defined $scale) { $scale = $scale->can('numify') ? $scale->numify() : "$scale" if ref($scale); $scale = int($scale); } ($scale,$mode); } ############################################################################## # constructors sub copy { # if two arguments, the first one is the class to "swallow" subclasses if (@_ > 1) { my $self = bless { sign => $_[1]->{sign}, value => $CALC->_copy($_[1]->{value}), }, $_[0] if @_ > 1; $self->{_a} = $_[1]->{_a} if defined $_[1]->{_a}; $self->{_p} = $_[1]->{_p} if defined $_[1]->{_p}; return $self; } my $self = bless { sign => $_[0]->{sign}, value => $CALC->_copy($_[0]->{value}), }, ref($_[0]); $self->{_a} = $_[0]->{_a} if defined $_[0]->{_a}; $self->{_p} = $_[0]->{_p} if defined $_[0]->{_p}; $self; } sub new { # create a new BigInt object from a string or another BigInt object. # see hash keys documented at top # the argument could be an object, so avoid ||, && etc on it, this would # cause costly overloaded code to be called. The only allowed ops are # ref() and defined. my ($class,$wanted,$a,$p,$r) = @_; # avoid numify-calls by not using || on $wanted! return $class->bzero($a,$p) if !defined $wanted; # default to 0 return $class->copy($wanted,$a,$p,$r) if ref($wanted) && $wanted->isa($class); # MBI or subclass $class->import() if $IMPORT == 0; # make require work my $self = bless {}, $class; # shortcut for "normal" numbers if ((!ref $wanted) && ($wanted =~ /^([+-]?)[1-9][0-9]*\z/)) { $self->{sign} = $1 || '+'; if ($wanted =~ /^[+-]/) { # remove sign without touching wanted to make it work with constants my $t = $wanted; $t =~ s/^[+-]//; $self->{value} = $CALC->_new($t); } else { $self->{value} = $CALC->_new($wanted); } no strict 'refs'; if ( (defined $a) || (defined $p) || (defined ${"${class}::precision"}) || (defined ${"${class}::accuracy"}) ) { $self->round($a,$p,$r) unless (@_ == 4 && !defined $a && !defined $p); } return $self; } # handle '+inf', '-inf' first if ($wanted =~ /^[+-]?inf\z/) { $self->{sign} = $wanted; # set a default sign for bstr() return $self->binf($wanted); } # split str in m mantissa, e exponent, i integer, f fraction, v value, s sign my ($mis,$miv,$mfv,$es,$ev) = _split($wanted); if (!ref $mis) { if ($_trap_nan) { require Carp; Carp::croak("$wanted is not a number in $class"); } $self->{value} = $CALC->_zero(); $self->{sign} = $nan; return $self; } if (!ref $miv) { # _from_hex or _from_bin $self->{value} = $mis->{value}; $self->{sign} = $mis->{sign}; return $self; # throw away $mis } # make integer from mantissa by adjusting exp, then convert to bigint $self->{sign} = $$mis; # store sign $self->{value} = $CALC->_zero(); # for all the NaN cases my $e = int("$$es$$ev"); # exponent (avoid recursion) if ($e > 0) { my $diff = $e - CORE::length($$mfv); if ($diff < 0) # Not integer { if ($_trap_nan) { require Carp; Carp::croak("$wanted not an integer in $class"); } #print "NOI 1\n"; return $upgrade->new($wanted,$a,$p,$r) if defined $upgrade; $self->{sign} = $nan; } else # diff >= 0 { # adjust fraction and add it to value #print "diff > 0 $$miv\n"; $$miv = $$miv . ($$mfv . '0' x $diff); } } else { if ($$mfv ne '') # e <= 0 { # fraction and negative/zero E => NOI if ($_trap_nan) { require Carp; Carp::croak("$wanted not an integer in $class"); } #print "NOI 2 \$\$mfv '$$mfv'\n"; return $upgrade->new($wanted,$a,$p,$r) if defined $upgrade; $self->{sign} = $nan; } elsif ($e < 0) { # xE-y, and empty mfv #print "xE-y\n"; $e = abs($e); if ($$miv !~ s/0{$e}$//) # can strip so many zero's? { if ($_trap_nan) { require Carp; Carp::croak("$wanted not an integer in $class"); } #print "NOI 3\n"; return $upgrade->new($wanted,$a,$p,$r) if defined $upgrade; $self->{sign} = $nan; } } } $self->{sign} = '+' if $$miv eq '0'; # normalize -0 => +0 $self->{value} = $CALC->_new($$miv) if $self->{sign} =~ /^[+-]$/; # if any of the globals is set, use them to round and store them inside $self # do not round for new($x,undef,undef) since that is used by MBF to signal # no rounding $self->round($a,$p,$r) unless @_ == 4 && !defined $a && !defined $p; $self; } sub bnan { # create a bigint 'NaN', if given a BigInt, set it to 'NaN' my $self = shift; $self = $class if !defined $self; if (!ref($self)) { my $c = $self; $self = {}; bless $self, $c; } no strict 'refs'; if (${"${class}::_trap_nan"}) { require Carp; Carp::croak ("Tried to set $self to NaN in $class\::bnan()"); } $self->import() if $IMPORT == 0; # make require work return if $self->modify('bnan'); if ($self->can('_bnan')) { # use subclass to initialize $self->_bnan(); } else { # otherwise do our own thing $self->{value} = $CALC->_zero(); } $self->{sign} = $nan; delete $self->{_a}; delete $self->{_p}; # rounding NaN is silly $self; } sub binf { # create a bigint '+-inf', if given a BigInt, set it to '+-inf' # the sign is either '+', or if given, used from there my $self = shift; my $sign = shift; $sign = '+' if !defined $sign || $sign !~ /^-(inf)?$/; $self = $class if !defined $self; if (!ref($self)) { my $c = $self; $self = {}; bless $self, $c; } no strict 'refs'; if (${"${class}::_trap_inf"}) { require Carp; Carp::croak ("Tried to set $self to +-inf in $class\::binf()"); } $self->import() if $IMPORT == 0; # make require work return if $self->modify('binf'); if ($self->can('_binf')) { # use subclass to initialize $self->_binf(); } else { # otherwise do our own thing $self->{value} = $CALC->_zero(); } $sign = $sign . 'inf' if $sign !~ /inf$/; # - => -inf $self->{sign} = $sign; ($self->{_a},$self->{_p}) = @_; # take over requested rounding $self; } sub bzero { # create a bigint '+0', if given a BigInt, set it to 0 my $self = shift; $self = __PACKAGE__ if !defined $self; if (!ref($self)) { my $c = $self; $self = {}; bless $self, $c; } $self->import() if $IMPORT == 0; # make require work return if $self->modify('bzero'); if ($self->can('_bzero')) { # use subclass to initialize $self->_bzero(); } else { # otherwise do our own thing $self->{value} = $CALC->_zero(); } $self->{sign} = '+'; if (@_ > 0) { if (@_ > 3) { # call like: $x->bzero($a,$p,$r,$y); ($self,$self->{_a},$self->{_p}) = $self->_find_round_parameters(@_); } else { $self->{_a} = $_[0] if ( (!defined $self->{_a}) || (defined $_[0] && $_[0] > $self->{_a})); $self->{_p} = $_[1] if ( (!defined $self->{_p}) || (defined $_[1] && $_[1] > $self->{_p})); } } $self; } sub bone { # create a bigint '+1' (or -1 if given sign '-'), # if given a BigInt, set it to +1 or -1, respectively my $self = shift; my $sign = shift; $sign = '+' if !defined $sign || $sign ne '-'; $self = $class if !defined $self; if (!ref($self)) { my $c = $self; $self = {}; bless $self, $c; } $self->import() if $IMPORT == 0; # make require work return if $self->modify('bone'); if ($self->can('_bone')) { # use subclass to initialize $self->_bone(); } else { # otherwise do our own thing $self->{value} = $CALC->_one(); } $self->{sign} = $sign; if (@_ > 0) { if (@_ > 3) { # call like: $x->bone($sign,$a,$p,$r,$y); ($self,$self->{_a},$self->{_p}) = $self->_find_round_parameters(@_); } else { # call like: $x->bone($sign,$a,$p,$r); $self->{_a} = $_[0] if ( (!defined $self->{_a}) || (defined $_[0] && $_[0] > $self->{_a})); $self->{_p} = $_[1] if ( (!defined $self->{_p}) || (defined $_[1] && $_[1] > $self->{_p})); } } $self; } ############################################################################## # string conversion sub bsstr { # (ref to BFLOAT or num_str ) return num_str # Convert number from internal format to scientific string format. # internal format is always normalized (no leading zeros, "-0E0" => "+0E0") my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); if ($x->{sign} !~ /^[+-]$/) { return $x->{sign} unless $x->{sign} eq '+inf'; # -inf, NaN return 'inf'; # +inf } my ($m,$e) = $x->parts(); #$m->bstr() . 'e+' . $e->bstr(); # e can only be positive in BigInt # 'e+' because E can only be positive in BigInt $m->bstr() . 'e+' . $CALC->_str($e->{value}); } sub bstr { # make a string from bigint object my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); if ($x->{sign} !~ /^[+-]$/) { return $x->{sign} unless $x->{sign} eq '+inf'; # -inf, NaN return 'inf'; # +inf } my $es = ''; $es = $x->{sign} if $x->{sign} eq '-'; $es.$CALC->_str($x->{value}); } sub numify { # Make a "normal" scalar from a BigInt object my $x = shift; $x = $class->new($x) unless ref $x; return $x->bstr() if $x->{sign} !~ /^[+-]$/; my $num = $CALC->_num($x->{value}); return -$num if $x->{sign} eq '-'; $num; } ############################################################################## # public stuff (usually prefixed with "b") sub sign { # return the sign of the number: +/-/-inf/+inf/NaN my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); $x->{sign}; } sub _find_round_parameters { # After any operation or when calling round(), the result is rounded by # regarding the A & P from arguments, local parameters, or globals. # !!!!!!! If you change this, remember to change round(), too! !!!!!!!!!! # This procedure finds the round parameters, but it is for speed reasons # duplicated in round. Otherwise, it is tested by the testsuite and used # by fdiv(). # returns ($self) or ($self,$a,$p,$r) - sets $self to NaN of both A and P # were requested/defined (locally or globally or both) my ($self,$a,$p,$r,@args) = @_; # $a accuracy, if given by caller # $p precision, if given by caller # $r round_mode, if given by caller # @args all 'other' arguments (0 for unary, 1 for binary ops) my $c = ref($self); # find out class of argument(s) no strict 'refs'; # convert to normal scalar for speed and correctness in inner parts $a = $a->can('numify') ? $a->numify() : "$a" if defined $a && ref($a); $p = $p->can('numify') ? $p->numify() : "$p" if defined $p && ref($p); # now pick $a or $p, but only if we have got "arguments" if (!defined $a) { foreach ($self,@args) { # take the defined one, or if both defined, the one that is smaller $a = $_->{_a} if (defined $_->{_a}) && (!defined $a || $_->{_a} < $a); } } if (!defined $p) { # even if $a is defined, take $p, to signal error for both defined foreach ($self,@args) { # take the defined one, or if both defined, the one that is bigger # -2 > -3, and 3 > 2 $p = $_->{_p} if (defined $_->{_p}) && (!defined $p || $_->{_p} > $p); } } # if still none defined, use globals (#2) $a = ${"$c\::accuracy"} unless defined $a; $p = ${"$c\::precision"} unless defined $p; # A == 0 is useless, so undef it to signal no rounding $a = undef if defined $a && $a == 0; # no rounding today? return ($self) unless defined $a || defined $p; # early out # set A and set P is an fatal error return ($self->bnan()) if defined $a && defined $p; # error $r = ${"$c\::round_mode"} unless defined $r; if ($r !~ /^(even|odd|\+inf|\-inf|zero|trunc|common)$/) { require Carp; Carp::croak ("Unknown round mode '$r'"); } $a = int($a) if defined $a; $p = int($p) if defined $p; ($self,$a,$p,$r); } sub round { # Round $self according to given parameters, or given second argument's # parameters or global defaults # for speed reasons, _find_round_parameters is embedded here: my ($self,$a,$p,$r,@args) = @_; # $a accuracy, if given by caller # $p precision, if given by caller # $r round_mode, if given by caller # @args all 'other' arguments (0 for unary, 1 for binary ops) my $c = ref($self); # find out class of argument(s) no strict 'refs'; # now pick $a or $p, but only if we have got "arguments" if (!defined $a) { foreach ($self,@args) { # take the defined one, or if both defined, the one that is smaller $a = $_->{_a} if (defined $_->{_a}) && (!defined $a || $_->{_a} < $a); } } if (!defined $p) { # even if $a is defined, take $p, to signal error for both defined foreach ($self,@args) { # take the defined one, or if both defined, the one that is bigger # -2 > -3, and 3 > 2 $p = $_->{_p} if (defined $_->{_p}) && (!defined $p || $_->{_p} > $p); } } # if still none defined, use globals (#2) $a = ${"$c\::accuracy"} unless defined $a; $p = ${"$c\::precision"} unless defined $p; # A == 0 is useless, so undef it to signal no rounding $a = undef if defined $a && $a == 0; # no rounding today? return $self unless defined $a || defined $p; # early out # set A and set P is an fatal error return $self->bnan() if defined $a && defined $p; $r = ${"$c\::round_mode"} unless defined $r; if ($r !~ /^(even|odd|\+inf|\-inf|zero|trunc|common)$/) { require Carp; Carp::croak ("Unknown round mode '$r'"); } # now round, by calling either fround or ffround: if (defined $a) { $self->bround(int($a),$r) if !defined $self->{_a} || $self->{_a} >= $a; } else # both can't be undefined due to early out { $self->bfround(int($p),$r) if !defined $self->{_p} || $self->{_p} <= $p; } # bround() or bfround() already called bnorm() if nec. $self; } sub bnorm { # (numstr or BINT) return BINT # Normalize number -- no-op here my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); $x; } sub babs { # (BINT or num_str) return BINT # make number absolute, or return absolute BINT from string my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return $x if $x->modify('babs'); # post-normalized abs for internal use (does nothing for NaN) $x->{sign} =~ s/^-/+/; $x; } sub bsgn { # Signum function. my $self = shift; return $self if $self->modify('bsgn'); return $self -> bone("+") if $self -> is_pos(); return $self -> bone("-") if $self -> is_neg(); return $self; # zero or NaN } sub bneg { # (BINT or num_str) return BINT # negate number or make a negated number from string my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return $x if $x->modify('bneg'); # for +0 dont negate (to have always normalized +0). Does nothing for 'NaN' $x->{sign} =~ tr/+-/-+/ unless ($x->{sign} eq '+' && $CALC->_is_zero($x->{value})); $x; } sub bcmp { # Compares 2 values. Returns one of undef, <0, =0, >0. (suitable for sort) # (BINT or num_str, BINT or num_str) return cond_code # set up parameters my ($self,$x,$y) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y) = objectify(2,@_); } return $upgrade->bcmp($x,$y) if defined $upgrade && ((!$x->isa($self)) || (!$y->isa($self))); if (($x->{sign} !~ /^[+-]$/) || ($y->{sign} !~ /^[+-]$/)) { # handle +-inf and NaN return undef if (($x->{sign} eq $nan) || ($y->{sign} eq $nan)); return 0 if $x->{sign} eq $y->{sign} && $x->{sign} =~ /^[+-]inf$/; return +1 if $x->{sign} eq '+inf'; return -1 if $x->{sign} eq '-inf'; return -1 if $y->{sign} eq '+inf'; return +1; } # check sign for speed first return 1 if $x->{sign} eq '+' && $y->{sign} eq '-'; # does also 0 <=> -y return -1 if $x->{sign} eq '-' && $y->{sign} eq '+'; # does also -x <=> 0 # have same sign, so compare absolute values. Don't make tests for zero here # because it's actually slower than testin in Calc (especially w/ Pari et al) # post-normalized compare for internal use (honors signs) if ($x->{sign} eq '+') { # $x and $y both > 0 return $CALC->_acmp($x->{value},$y->{value}); } # $x && $y both < 0 $CALC->_acmp($y->{value},$x->{value}); # swaped acmp (lib returns 0,1,-1) } sub bacmp { # Compares 2 values, ignoring their signs. # Returns one of undef, <0, =0, >0. (suitable for sort) # (BINT, BINT) return cond_code # set up parameters my ($self,$x,$y) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y) = objectify(2,@_); } return $upgrade->bacmp($x,$y) if defined $upgrade && ((!$x->isa($self)) || (!$y->isa($self))); if (($x->{sign} !~ /^[+-]$/) || ($y->{sign} !~ /^[+-]$/)) { # handle +-inf and NaN return undef if (($x->{sign} eq $nan) || ($y->{sign} eq $nan)); return 0 if $x->{sign} =~ /^[+-]inf$/ && $y->{sign} =~ /^[+-]inf$/; return 1 if $x->{sign} =~ /^[+-]inf$/ && $y->{sign} !~ /^[+-]inf$/; return -1; } $CALC->_acmp($x->{value},$y->{value}); # lib does only 0,1,-1 } sub badd { # add second arg (BINT or string) to first (BINT) (modifies first) # return result as BINT # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('badd'); return $upgrade->badd($upgrade->new($x),$upgrade->new($y),@r) if defined $upgrade && ((!$x->isa($self)) || (!$y->isa($self))); $r[3] = $y; # no push! # inf and NaN handling if (($x->{sign} !~ /^[+-]$/) || ($y->{sign} !~ /^[+-]$/)) { # NaN first return $x->bnan() if (($x->{sign} eq $nan) || ($y->{sign} eq $nan)); # inf handling if (($x->{sign} =~ /^[+-]inf$/) && ($y->{sign} =~ /^[+-]inf$/)) { # +inf++inf or -inf+-inf => same, rest is NaN return $x if $x->{sign} eq $y->{sign}; return $x->bnan(); } # +-inf + something => +inf # something +-inf => +-inf $x->{sign} = $y->{sign}, return $x if $y->{sign} =~ /^[+-]inf$/; return $x; } my ($sx, $sy) = ( $x->{sign}, $y->{sign} ); # get signs if ($sx eq $sy) { $x->{value} = $CALC->_add($x->{value},$y->{value}); # same sign, abs add } else { my $a = $CALC->_acmp ($y->{value},$x->{value}); # absolute compare if ($a > 0) { $x->{value} = $CALC->_sub($y->{value},$x->{value},1); # abs sub w/ swap $x->{sign} = $sy; } elsif ($a == 0) { # speedup, if equal, set result to 0 $x->{value} = $CALC->_zero(); $x->{sign} = '+'; } else # a < 0 { $x->{value} = $CALC->_sub($x->{value}, $y->{value}); # abs sub } } $x->round(@r); } sub bsub { # (BINT or num_str, BINT or num_str) return BINT # subtract second arg from first, modify first # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bsub'); return $upgrade->new($x)->bsub($upgrade->new($y),@r) if defined $upgrade && ((!$x->isa($self)) || (!$y->isa($self))); return $x->round(@r) if $y->is_zero(); # To correctly handle the lone special case $x->bsub($x), we note the sign # of $x, then flip the sign from $y, and if the sign of $x did change, too, # then we caught the special case: my $xsign = $x->{sign}; $y->{sign} =~ tr/+\-/-+/; # does nothing for NaN if ($xsign ne $x->{sign}) { # special case of $x->bsub($x) results in 0 return $x->bzero(@r) if $xsign =~ /^[+-]$/; return $x->bnan(); # NaN, -inf, +inf } $x->badd($y,@r); # badd does not leave internal zeros $y->{sign} =~ tr/+\-/-+/; # refix $y (does nothing for NaN) $x; # already rounded by badd() or no round nec. } sub binc { # increment arg by one my ($self,$x,$a,$p,$r) = ref($_[0]) ? (ref($_[0]),@_) : objectify(1,@_); return $x if $x->modify('binc'); if ($x->{sign} eq '+') { $x->{value} = $CALC->_inc($x->{value}); return $x->round($a,$p,$r); } elsif ($x->{sign} eq '-') { $x->{value} = $CALC->_dec($x->{value}); $x->{sign} = '+' if $CALC->_is_zero($x->{value}); # -1 +1 => -0 => +0 return $x->round($a,$p,$r); } # inf, nan handling etc $x->badd($self->bone(),$a,$p,$r); # badd does round } sub bdec { # decrement arg by one my ($self,$x,@r) = ref($_[0]) ? (ref($_[0]),@_) : objectify(1,@_); return $x if $x->modify('bdec'); if ($x->{sign} eq '-') { # x already < 0 $x->{value} = $CALC->_inc($x->{value}); } else { return $x->badd($self->bone('-'),@r) unless $x->{sign} eq '+'; # inf or NaN # >= 0 if ($CALC->_is_zero($x->{value})) { # == 0 $x->{value} = $CALC->_one(); $x->{sign} = '-'; # 0 => -1 } else { # > 0 $x->{value} = $CALC->_dec($x->{value}); } } $x->round(@r); } sub blog { # calculate $x = $a ** $base + $b and return $a (e.g. the log() to base # $base of $x) # set up parameters my ($self,$x,$base,@r) = (undef,@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$base,@r) = objectify(2,@_); } return $x if $x->modify('blog'); $base = $self->new($base) if defined $base && !ref $base; # inf, -inf, NaN, <0 => NaN return $x->bnan() if $x->{sign} ne '+' || (defined $base && $base->{sign} ne '+'); return $upgrade->blog($upgrade->new($x),$base,@r) if defined $upgrade; # fix for bug #24969: # the default base is e (Euler's number) which is not an integer if (!defined $base) { require Math::BigFloat; my $u = Math::BigFloat->blog(Math::BigFloat->new($x))->as_int(); # modify $x in place $x->{value} = $u->{value}; $x->{sign} = $u->{sign}; return $x; } my ($rc,$exact) = $CALC->_log_int($x->{value},$base->{value}); return $x->bnan() unless defined $rc; # not possible to take log? $x->{value} = $rc; $x->round(@r); } sub bnok { # Calculate n over k (binomial coefficient or "choose" function) as integer. # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bnok'); return $x->bnan() if $x->{sign} eq 'NaN' || $y->{sign} eq 'NaN'; return $x->binf() if $x->{sign} eq '+inf'; # k > n or k < 0 => 0 my $cmp = $x->bacmp($y); return $x->bzero() if $cmp < 0 || $y->{sign} =~ /^-/; # k == n => 1 return $x->bone(@r) if $cmp == 0; if ($CALC->can('_nok')) { $x->{value} = $CALC->_nok($x->{value},$y->{value}); } else { # ( 7 ) 7! 1*2*3*4 * 5*6*7 5 * 6 * 7 6 7 # ( - ) = --------- = --------------- = --------- = 5 * - * - # ( 3 ) (7-3)! 3! 1*2*3*4 * 1*2*3 1 * 2 * 3 2 3 if (!$y->is_zero()) { my $z = $x - $y; $z->binc(); my $r = $z->copy(); $z->binc(); my $d = $self->new(2); while ($z->bacmp($x) <= 0) # f <= x ? { $r->bmul($z); $r->bdiv($d); $z->binc(); $d->binc(); } $x->{value} = $r->{value}; $x->{sign} = '+'; } else { $x->bone(); } } $x->round(@r); } sub bexp { # Calculate e ** $x (Euler's number to the power of X), truncated to # an integer value. my ($self,$x,@r) = ref($_[0]) ? (ref($_[0]),@_) : objectify(1,@_); return $x if $x->modify('bexp'); # inf, -inf, NaN, <0 => NaN return $x->bnan() if $x->{sign} eq 'NaN'; return $x->bone() if $x->is_zero(); return $x if $x->{sign} eq '+inf'; return $x->bzero() if $x->{sign} eq '-inf'; my $u; { # run through Math::BigFloat unless told otherwise require Math::BigFloat unless defined $upgrade; local $upgrade = 'Math::BigFloat' unless defined $upgrade; # calculate result, truncate it to integer $u = $upgrade->bexp($upgrade->new($x),@r); } if (!defined $upgrade) { $u = $u->as_int(); # modify $x in place $x->{value} = $u->{value}; $x->round(@r); } else { $x = $u; } } sub blcm { # (BINT or num_str, BINT or num_str) return BINT # does not modify arguments, but returns new object # Lowest Common Multiple my $y = shift; my ($x); if (ref($y)) { $x = $y->copy(); } else { $x = $class->new($y); } my $self = ref($x); while (@_) { my $y = shift; $y = $self->new($y) if !ref ($y); $x = __lcm($x,$y); } $x; } sub bgcd { # (BINT or num_str, BINT or num_str) return BINT # does not modify arguments, but returns new object # GCD -- Euclid's algorithm, variant C (Knuth Vol 3, pg 341 ff) my $y = shift; $y = $class->new($y) if !ref($y); my $self = ref($y); my $x = $y->copy()->babs(); # keep arguments return $x->bnan() if $x->{sign} !~ /^[+-]$/; # x NaN? while (@_) { $y = shift; $y = $self->new($y) if !ref($y); return $x->bnan() if $y->{sign} !~ /^[+-]$/; # y NaN? $x->{value} = $CALC->_gcd($x->{value},$y->{value}); last if $CALC->_is_one($x->{value}); } $x; } sub bnot { # (num_str or BINT) return BINT # represent ~x as twos-complement number # we don't need $self, so undef instead of ref($_[0]) make it slightly faster my ($self,$x,$a,$p,$r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('bnot'); $x->binc()->bneg(); # binc already does round } ############################################################################## # is_foo test routines # we don't need $self, so undef instead of ref($_[0]) make it slightly faster sub is_zero { # return true if arg (BINT or num_str) is zero (array '+', '0') my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return 0 if $x->{sign} !~ /^\+$/; # -, NaN & +-inf aren't $CALC->_is_zero($x->{value}); } sub is_nan { # return true if arg (BINT or num_str) is NaN my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); $x->{sign} eq $nan ? 1 : 0; } sub is_inf { # return true if arg (BINT or num_str) is +-inf my ($self,$x,$sign) = ref($_[0]) ? (undef,@_) : objectify(1,@_); if (defined $sign) { $sign = '[+-]inf' if $sign eq ''; # +- doesn't matter, only that's inf $sign = "[$1]inf" if $sign =~ /^([+-])(inf)?$/; # extract '+' or '-' return $x->{sign} =~ /^$sign$/ ? 1 : 0; } $x->{sign} =~ /^[+-]inf$/ ? 1 : 0; # only +-inf is infinity } sub is_one { # return true if arg (BINT or num_str) is +1, or -1 if sign is given my ($self,$x,$sign) = ref($_[0]) ? (undef,@_) : objectify(1,@_); $sign = '+' if !defined $sign || $sign ne '-'; return 0 if $x->{sign} ne $sign; # -1 != +1, NaN, +-inf aren't either $CALC->_is_one($x->{value}); } sub is_odd { # return true when arg (BINT or num_str) is odd, false for even my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return 0 if $x->{sign} !~ /^[+-]$/; # NaN & +-inf aren't $CALC->_is_odd($x->{value}); } sub is_even { # return true when arg (BINT or num_str) is even, false for odd my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return 0 if $x->{sign} !~ /^[+-]$/; # NaN & +-inf aren't $CALC->_is_even($x->{value}); } sub is_positive { # return true when arg (BINT or num_str) is positive (> 0) my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); return 1 if $x->{sign} eq '+inf'; # +inf is positive # 0+ is neither positive nor negative ($x->{sign} eq '+' && !$x->is_zero()) ? 1 : 0; } sub is_negative { # return true when arg (BINT or num_str) is negative (< 0) my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); $x->{sign} =~ /^-/ ? 1 : 0; # -inf is negative, but NaN is not } sub is_int { # return true when arg (BINT or num_str) is an integer # always true for BigInt, but different for BigFloats my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); $x->{sign} =~ /^[+-]$/ ? 1 : 0; # inf/-inf/NaN aren't } ############################################################################### sub bmul { # multiply the first number by the second number # (BINT or num_str, BINT or num_str) return BINT # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bmul'); return $x->bnan() if (($x->{sign} eq $nan) || ($y->{sign} eq $nan)); # inf handling if (($x->{sign} =~ /^[+-]inf$/) || ($y->{sign} =~ /^[+-]inf$/)) { return $x->bnan() if $x->is_zero() || $y->is_zero(); # result will always be +-inf: # +inf * +/+inf => +inf, -inf * -/-inf => +inf # +inf * -/-inf => -inf, -inf * +/+inf => -inf return $x->binf() if ($x->{sign} =~ /^\+/ && $y->{sign} =~ /^\+/); return $x->binf() if ($x->{sign} =~ /^-/ && $y->{sign} =~ /^-/); return $x->binf('-'); } return $upgrade->bmul($x,$upgrade->new($y),@r) if defined $upgrade && !$y->isa($self); $r[3] = $y; # no push here $x->{sign} = $x->{sign} eq $y->{sign} ? '+' : '-'; # +1 * +1 or -1 * -1 => + $x->{value} = $CALC->_mul($x->{value},$y->{value}); # do actual math $x->{sign} = '+' if $CALC->_is_zero($x->{value}); # no -0 $x->round(@r); } sub bmuladd { # multiply two numbers and then add the third to the result # (BINT or num_str, BINT or num_str, BINT or num_str) return BINT # set up parameters my ($self,$x,$y,$z,@r) = objectify(3,@_); return $x if $x->modify('bmuladd'); return $x->bnan() if ($x->{sign} eq $nan) || ($y->{sign} eq $nan) || ($z->{sign} eq $nan); # inf handling of x and y if (($x->{sign} =~ /^[+-]inf$/) || ($y->{sign} =~ /^[+-]inf$/)) { return $x->bnan() if $x->is_zero() || $y->is_zero(); # result will always be +-inf: # +inf * +/+inf => +inf, -inf * -/-inf => +inf # +inf * -/-inf => -inf, -inf * +/+inf => -inf return $x->binf() if ($x->{sign} =~ /^\+/ && $y->{sign} =~ /^\+/); return $x->binf() if ($x->{sign} =~ /^-/ && $y->{sign} =~ /^-/); return $x->binf('-'); } # inf handling x*y and z if (($z->{sign} =~ /^[+-]inf$/)) { # something +-inf => +-inf $x->{sign} = $z->{sign}, return $x if $z->{sign} =~ /^[+-]inf$/; } return $upgrade->bmuladd($x,$upgrade->new($y),$upgrade->new($z),@r) if defined $upgrade && (!$y->isa($self) || !$z->isa($self) || !$x->isa($self)); # TODO: what if $y and $z have A or P set? $r[3] = $z; # no push here $x->{sign} = $x->{sign} eq $y->{sign} ? '+' : '-'; # +1 * +1 or -1 * -1 => + $x->{value} = $CALC->_mul($x->{value},$y->{value}); # do actual math $x->{sign} = '+' if $CALC->_is_zero($x->{value}); # no -0 my ($sx, $sz) = ( $x->{sign}, $z->{sign} ); # get signs if ($sx eq $sz) { $x->{value} = $CALC->_add($x->{value},$z->{value}); # same sign, abs add } else { my $a = $CALC->_acmp ($z->{value},$x->{value}); # absolute compare if ($a > 0) { $x->{value} = $CALC->_sub($z->{value},$x->{value},1); # abs sub w/ swap $x->{sign} = $sz; } elsif ($a == 0) { # speedup, if equal, set result to 0 $x->{value} = $CALC->_zero(); $x->{sign} = '+'; } else # a < 0 { $x->{value} = $CALC->_sub($x->{value}, $z->{value}); # abs sub } } $x->round(@r); } sub _div_inf { # helper function that handles +-inf cases for bdiv()/bmod() to reuse code my ($self,$x,$y) = @_; # NaN if x == NaN or y == NaN or x==y==0 return wantarray ? ($x->bnan(),$self->bnan()) : $x->bnan() if (($x->is_nan() || $y->is_nan()) || ($x->is_zero() && $y->is_zero())); # +-inf / +-inf == NaN, remainder also NaN if (($x->{sign} =~ /^[+-]inf$/) && ($y->{sign} =~ /^[+-]inf$/)) { return wantarray ? ($x->bnan(),$self->bnan()) : $x->bnan(); } # x / +-inf => 0, remainder x (works even if x == 0) if ($y->{sign} =~ /^[+-]inf$/) { my $t = $x->copy(); # bzero clobbers up $x return wantarray ? ($x->bzero(),$t) : $x->bzero() } # 5 / 0 => +inf, -6 / 0 => -inf # +inf / 0 = inf, inf, and -inf / 0 => -inf, -inf # exception: -8 / 0 has remainder -8, not 8 # exception: -inf / 0 has remainder -inf, not inf if ($y->is_zero()) { # +-inf / 0 => special case for -inf return wantarray ? ($x,$x->copy()) : $x if $x->is_inf(); if (!$x->is_zero() && !$x->is_inf()) { my $t = $x->copy(); # binf clobbers up $x return wantarray ? ($x->binf($x->{sign}),$t) : $x->binf($x->{sign}) } } # last case: +-inf / ordinary number my $sign = '+inf'; $sign = '-inf' if substr($x->{sign},0,1) ne $y->{sign}; $x->{sign} = $sign; return wantarray ? ($x,$self->bzero()) : $x; } sub bdiv { # (dividend: BINT or num_str, divisor: BINT or num_str) return # (BINT,BINT) (quo,rem) or BINT (only rem) # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bdiv'); return $self->_div_inf($x,$y) if (($x->{sign} !~ /^[+-]$/) || ($y->{sign} !~ /^[+-]$/) || $y->is_zero()); return $upgrade->bdiv($upgrade->new($x),$upgrade->new($y),@r) if defined $upgrade; $r[3] = $y; # no push! # calc new sign and in case $y == +/- 1, return $x my $xsign = $x->{sign}; # keep $x->{sign} = ($x->{sign} ne $y->{sign} ? '-' : '+'); if (wantarray) { my $rem = $self->bzero(); ($x->{value},$rem->{value}) = $CALC->_div($x->{value},$y->{value}); $x->{sign} = '+' if $CALC->_is_zero($x->{value}); $rem->{_a} = $x->{_a}; $rem->{_p} = $x->{_p}; $x->round(@r); if (! $CALC->_is_zero($rem->{value})) { $rem->{sign} = $y->{sign}; $rem = $y->copy()->bsub($rem) if $xsign ne $y->{sign}; # one of them '-' } else { $rem->{sign} = '+'; # dont leave -0 } $rem->round(@r); return ($x,$rem); } $x->{value} = $CALC->_div($x->{value},$y->{value}); $x->{sign} = '+' if $CALC->_is_zero($x->{value}); $x->round(@r); } ############################################################################### # modulus functions sub bmod { # modulus (or remainder) # (BINT or num_str, BINT or num_str) return BINT # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bmod'); $r[3] = $y; # no push! if (($x->{sign} !~ /^[+-]$/) || ($y->{sign} !~ /^[+-]$/) || $y->is_zero()) { my ($d,$r) = $self->_div_inf($x,$y); $x->{sign} = $r->{sign}; $x->{value} = $r->{value}; return $x->round(@r); } # calc new sign and in case $y == +/- 1, return $x $x->{value} = $CALC->_mod($x->{value},$y->{value}); if (!$CALC->_is_zero($x->{value})) { $x->{value} = $CALC->_sub($y->{value},$x->{value},1) # $y-$x if ($x->{sign} ne $y->{sign}); $x->{sign} = $y->{sign}; } else { $x->{sign} = '+'; # dont leave -0 } $x->round(@r); } sub bmodinv { # Return modular multiplicative inverse: z is the modular inverse of x (mod # y) if and only if x*z (mod y) = 1 (mod y). If the modulus y is larger than # one, x and z are relative primes (i.e., their greatest common divisor is # one). # # If no modular multiplicative inverse exists, NaN is returned. # set up parameters my ($self,$x,$y,@r) = (undef,@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bmodinv'); # Return NaN if one or both arguments is +inf, -inf, or nan. return $x->bnan() if ($y->{sign} !~ /^[+-]$/ || $x->{sign} !~ /^[+-]$/); # Return NaN if $y is zero; 1 % 0 makes no sense. return $x->bnan() if $y->is_zero(); # Return 0 in the trivial case. $x % 1 or $x % -1 is zero for all finite # integers $x. return $x->bzero() if ($y->is_one() || $y->is_one('-')); # Return NaN if $x = 0, or $x modulo $y is zero. The only valid case when # $x = 0 is when $y = 1 or $y = -1, but that was covered above. # # Note that computing $x modulo $y here affects the value we'll feed to # $CALC->_modinv() below when $x and $y have opposite signs. E.g., if $x = # 5 and $y = 7, those two values are fed to _modinv(), but if $x = -5 and # $y = 7, the values fed to _modinv() are $x = 2 (= -5 % 7) and $y = 7. # The value if $x is affected only when $x and $y have opposite signs. $x->bmod($y); return $x->bnan() if $x->is_zero(); # Compute the modular multiplicative inverse of the absolute values. We'll # correct for the signs of $x and $y later. Return NaN if no GCD is found. ($x->{value}, $x->{sign}) = $CALC->_modinv($x->{value}, $y->{value}); return $x->bnan() if !defined $x->{value}; # Library inconsistency workaround: _modinv() in Math::BigInt::GMP versions # <= 1.32 return undef rather than a "+" for the sign. $x->{sign} = '+' unless defined $x->{sign}; # When one or both arguments are negative, we have the following # relations. If x and y are positive: # # modinv(-x, -y) = -modinv(x, y) # modinv(-x, y) = y - modinv(x, y) = -modinv(x, y) (mod y) # modinv( x, -y) = modinv(x, y) - y = modinv(x, y) (mod -y) # We must swap the sign of the result if the original $x is negative. # However, we must compensate for ignoring the signs when computing the # inverse modulo. The net effect is that we must swap the sign of the # result if $y is negative. $x -> bneg() if $y->{sign} eq '-'; # Compute $x modulo $y again after correcting the sign. $x -> bmod($y) if $x->{sign} ne $y->{sign}; return $x; } sub bmodpow { # Modular exponentiation. Raises a very large number to a very large exponent # in a given very large modulus quickly, thanks to binary exponentiation. # Supports negative exponents. my ($self,$num,$exp,$mod,@r) = objectify(3,@_); return $num if $num->modify('bmodpow'); # When the exponent 'e' is negative, use the following relation, which is # based on finding the multiplicative inverse 'd' of 'b' modulo 'm': # # b^(-e) (mod m) = d^e (mod m) where b*d = 1 (mod m) $num->bmodinv($mod) if ($exp->{sign} eq '-'); # Check for valid input. All operands must be finite, and the modulus must be # non-zero. return $num->bnan() if ($num->{sign} =~ /NaN|inf/ || # NaN, -inf, +inf $exp->{sign} =~ /NaN|inf/ || # NaN, -inf, +inf $mod->{sign} =~ /NaN|inf/ || # NaN, -inf, +inf $mod->is_zero()); # Compute 'a (mod m)', ignoring the signs on 'a' and 'm'. If the resulting # value is zero, the output is also zero, regardless of the signs on 'a' and # 'm'. my $value = $CALC->_modpow($num->{value}, $exp->{value}, $mod->{value}); my $sign = '+'; # If the resulting value is non-zero, we have four special cases, depending # on the signs on 'a' and 'm'. unless ($CALC->_is_zero($value)) { # There is a negative sign on 'a' (= $num**$exp) only if the number we # are exponentiating ($num) is negative and the exponent ($exp) is odd. if ($num->{sign} eq '-' && $exp->is_odd()) { # When both the number 'a' and the modulus 'm' have a negative sign, # use this relation: # # -a (mod -m) = -(a (mod m)) if ($mod->{sign} eq '-') { $sign = '-'; } # When only the number 'a' has a negative sign, use this relation: # # -a (mod m) = m - (a (mod m)) else { # Use copy of $mod since _sub() modifies the first argument. my $mod = $CALC->_copy($mod->{value}); $value = $CALC->_sub($mod, $value); $sign = '+'; } } else { # When only the modulus 'm' has a negative sign, use this relation: # # a (mod -m) = (a (mod m)) - m # = -(m - (a (mod m))) if ($mod->{sign} eq '-') { # Use copy of $mod since _sub() modifies the first argument. my $mod = $CALC->_copy($mod->{value}); $value = $CALC->_sub($mod, $value); $sign = '-'; } # When neither the number 'a' nor the modulus 'm' have a negative # sign, directly return the already computed value. # # (a (mod m)) } } $num->{value} = $value; $num->{sign} = $sign; return $num; } ############################################################################### sub bfac { # (BINT or num_str, BINT or num_str) return BINT # compute factorial number from $x, modify $x in place my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('bfac') || $x->{sign} eq '+inf'; # inf => inf return $x->bnan() if $x->{sign} ne '+'; # NaN, <0 etc => NaN $x->{value} = $CALC->_fac($x->{value}); $x->round(@r); } sub bpow { # (BINT or num_str, BINT or num_str) return BINT # compute power of two numbers -- stolen from Knuth Vol 2 pg 233 # modifies first argument # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bpow'); return $x->bnan() if $x->{sign} eq $nan || $y->{sign} eq $nan; # inf handling if (($x->{sign} =~ /^[+-]inf$/) || ($y->{sign} =~ /^[+-]inf$/)) { if (($x->{sign} =~ /^[+-]inf$/) && ($y->{sign} =~ /^[+-]inf$/)) { # +-inf ** +-inf return $x->bnan(); } # +-inf ** Y if ($x->{sign} =~ /^[+-]inf/) { # +inf ** 0 => NaN return $x->bnan() if $y->is_zero(); # -inf ** -1 => 1/inf => 0 return $x->bzero() if $y->is_one('-') && $x->is_negative(); # +inf ** Y => inf return $x if $x->{sign} eq '+inf'; # -inf ** Y => -inf if Y is odd return $x if $y->is_odd(); return $x->babs(); } # X ** +-inf # 1 ** +inf => 1 return $x if $x->is_one(); # 0 ** inf => 0 return $x if $x->is_zero() && $y->{sign} =~ /^[+]/; # 0 ** -inf => inf return $x->binf() if $x->is_zero(); # -1 ** -inf => NaN return $x->bnan() if $x->is_one('-') && $y->{sign} =~ /^[-]/; # -X ** -inf => 0 return $x->bzero() if $x->{sign} eq '-' && $y->{sign} =~ /^[-]/; # -1 ** inf => NaN return $x->bnan() if $x->{sign} eq '-'; # X ** inf => inf return $x->binf() if $y->{sign} =~ /^[+]/; # X ** -inf => 0 return $x->bzero(); } return $upgrade->bpow($upgrade->new($x),$y,@r) if defined $upgrade && (!$y->isa($self) || $y->{sign} eq '-'); $r[3] = $y; # no push! # cases 0 ** Y, X ** 0, X ** 1, 1 ** Y are handled by Calc or Emu my $new_sign = '+'; $new_sign = $y->is_odd() ? '-' : '+' if ($x->{sign} ne '+'); # 0 ** -7 => ( 1 / (0 ** 7)) => 1 / 0 => +inf return $x->binf() if $y->{sign} eq '-' && $x->{sign} eq '+' && $CALC->_is_zero($x->{value}); # 1 ** -y => 1 / (1 ** |y|) # so do test for negative $y after above's clause return $x->bnan() if $y->{sign} eq '-' && !$CALC->_is_one($x->{value}); $x->{value} = $CALC->_pow($x->{value},$y->{value}); $x->{sign} = $new_sign; $x->{sign} = '+' if $CALC->_is_zero($y->{value}); $x->round(@r); } sub blsft { # (BINT or num_str, BINT or num_str) return BINT # compute x << y, base n, y >= 0 # set up parameters my ($self,$x,$y,$n,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,$n,@r) = objectify(2,@_); } return $x if $x->modify('blsft'); return $x->bnan() if ($x->{sign} !~ /^[+-]$/ || $y->{sign} !~ /^[+-]$/); return $x->round(@r) if $y->is_zero(); $n = 2 if !defined $n; return $x->bnan() if $n <= 0 || $y->{sign} eq '-'; $x->{value} = $CALC->_lsft($x->{value},$y->{value},$n); $x->round(@r); } sub brsft { # (BINT or num_str, BINT or num_str) return BINT # compute x >> y, base n, y >= 0 # set up parameters my ($self,$x,$y,$n,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,$n,@r) = objectify(2,@_); } return $x if $x->modify('brsft'); return $x->bnan() if ($x->{sign} !~ /^[+-]$/ || $y->{sign} !~ /^[+-]$/); return $x->round(@r) if $y->is_zero(); return $x->bzero(@r) if $x->is_zero(); # 0 => 0 $n = 2 if !defined $n; return $x->bnan() if $n <= 0 || $y->{sign} eq '-'; # this only works for negative numbers when shifting in base 2 if (($x->{sign} eq '-') && ($n == 2)) { return $x->round(@r) if $x->is_one('-'); # -1 => -1 if (!$y->is_one()) { # although this is O(N*N) in calc (as_bin!) it is O(N) in Pari et al # but perhaps there is a better emulation for two's complement shift... # if $y != 1, we must simulate it by doing: # convert to bin, flip all bits, shift, and be done $x->binc(); # -3 => -2 my $bin = $x->as_bin(); $bin =~ s/^-0b//; # strip '-0b' prefix $bin =~ tr/10/01/; # flip bits # now shift if ($y >= CORE::length($bin)) { $bin = '0'; # shifting to far right creates -1 # 0, because later increment makes # that 1, attached '-' makes it '-1' # because -1 >> x == -1 ! } else { $bin =~ s/.{$y}$//; # cut off at the right side $bin = '1' . $bin; # extend left side by one dummy '1' $bin =~ tr/10/01/; # flip bits back } my $res = $self->new('0b'.$bin); # add prefix and convert back $res->binc(); # remember to increment $x->{value} = $res->{value}; # take over value return $x->round(@r); # we are done now, magic, isn't? } # x < 0, n == 2, y == 1 $x->bdec(); # n == 2, but $y == 1: this fixes it } $x->{value} = $CALC->_rsft($x->{value},$y->{value},$n); $x->round(@r); } sub band { #(BINT or num_str, BINT or num_str) return BINT # compute x & y # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('band'); $r[3] = $y; # no push! return $x->bnan() if ($x->{sign} !~ /^[+-]$/ || $y->{sign} !~ /^[+-]$/); my $sx = $x->{sign} eq '+' ? 1 : -1; my $sy = $y->{sign} eq '+' ? 1 : -1; if ($sx == 1 && $sy == 1) { $x->{value} = $CALC->_and($x->{value},$y->{value}); return $x->round(@r); } if ($CAN{signed_and}) { $x->{value} = $CALC->_signed_and($x->{value},$y->{value},$sx,$sy); return $x->round(@r); } require $EMU_LIB; __emu_band($self,$x,$y,$sx,$sy,@r); } sub bior { #(BINT or num_str, BINT or num_str) return BINT # compute x | y # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bior'); $r[3] = $y; # no push! return $x->bnan() if ($x->{sign} !~ /^[+-]$/ || $y->{sign} !~ /^[+-]$/); my $sx = $x->{sign} eq '+' ? 1 : -1; my $sy = $y->{sign} eq '+' ? 1 : -1; # the sign of X follows the sign of X, e.g. sign of Y irrelevant for bior() # don't use lib for negative values if ($sx == 1 && $sy == 1) { $x->{value} = $CALC->_or($x->{value},$y->{value}); return $x->round(@r); } # if lib can do negative values, let it handle this if ($CAN{signed_or}) { $x->{value} = $CALC->_signed_or($x->{value},$y->{value},$sx,$sy); return $x->round(@r); } require $EMU_LIB; __emu_bior($self,$x,$y,$sx,$sy,@r); } sub bxor { #(BINT or num_str, BINT or num_str) return BINT # compute x ^ y # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$x,$y,@r) = objectify(2,@_); } return $x if $x->modify('bxor'); $r[3] = $y; # no push! return $x->bnan() if ($x->{sign} !~ /^[+-]$/ || $y->{sign} !~ /^[+-]$/); my $sx = $x->{sign} eq '+' ? 1 : -1; my $sy = $y->{sign} eq '+' ? 1 : -1; # don't use lib for negative values if ($sx == 1 && $sy == 1) { $x->{value} = $CALC->_xor($x->{value},$y->{value}); return $x->round(@r); } # if lib can do negative values, let it handle this if ($CAN{signed_xor}) { $x->{value} = $CALC->_signed_xor($x->{value},$y->{value},$sx,$sy); return $x->round(@r); } require $EMU_LIB; __emu_bxor($self,$x,$y,$sx,$sy,@r); } sub length { my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); my $e = $CALC->_len($x->{value}); wantarray ? ($e,0) : $e; } sub digit { # return the nth decimal digit, negative values count backward, 0 is right my ($self,$x,$n) = ref($_[0]) ? (undef,@_) : objectify(1,@_); $n = $n->numify() if ref($n); $CALC->_digit($x->{value},$n||0); } sub _trailing_zeros { # return the amount of trailing zeros in $x (as scalar) my $x = shift; $x = $class->new($x) unless ref $x; return 0 if $x->{sign} !~ /^[+-]$/; # NaN, inf, -inf etc $CALC->_zeros($x->{value}); # must handle odd values, 0 etc } sub bsqrt { # calculate square root of $x my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('bsqrt'); return $x->bnan() if $x->{sign} !~ /^\+/; # -x or -inf or NaN => NaN return $x if $x->{sign} eq '+inf'; # sqrt(+inf) == inf return $upgrade->bsqrt($x,@r) if defined $upgrade; $x->{value} = $CALC->_sqrt($x->{value}); $x->round(@r); } sub broot { # calculate $y'th root of $x # set up parameters my ($self,$x,$y,@r) = (ref($_[0]),@_); $y = $self->new(2) unless defined $y; # objectify is costly, so avoid it if ((!ref($x)) || (ref($x) ne ref($y))) { ($self,$x,$y,@r) = objectify(2,$self || $class,@_); } return $x if $x->modify('broot'); # NaN handling: $x ** 1/0, x or y NaN, or y inf/-inf or y == 0 return $x->bnan() if $x->{sign} !~ /^\+/ || $y->is_zero() || $y->{sign} !~ /^\+$/; return $x->round(@r) if $x->is_zero() || $x->is_one() || $x->is_inf() || $y->is_one(); return $upgrade->new($x)->broot($upgrade->new($y),@r) if defined $upgrade; $x->{value} = $CALC->_root($x->{value},$y->{value}); $x->round(@r); } sub exponent { # return a copy of the exponent (here always 0, NaN or 1 for $m == 0) my ($self,$x) = ref($_[0]) ? (ref($_[0]),$_[0]) : objectify(1,@_); if ($x->{sign} !~ /^[+-]$/) { my $s = $x->{sign}; $s =~ s/^[+-]//; # NaN, -inf,+inf => NaN or inf return $self->new($s); } return $self->bone() if $x->is_zero(); # 12300 => 2 trailing zeros => exponent is 2 $self->new( $CALC->_zeros($x->{value}) ); } sub mantissa { # return the mantissa (compatible to Math::BigFloat, e.g. reduced) my ($self,$x) = ref($_[0]) ? (ref($_[0]),$_[0]) : objectify(1,@_); if ($x->{sign} !~ /^[+-]$/) { # for NaN, +inf, -inf: keep the sign return $self->new($x->{sign}); } my $m = $x->copy(); delete $m->{_p}; delete $m->{_a}; # that's a bit inefficient: my $zeros = $CALC->_zeros($m->{value}); $m->brsft($zeros,10) if $zeros != 0; $m; } sub parts { # return a copy of both the exponent and the mantissa my ($self,$x) = ref($_[0]) ? (undef,$_[0]) : objectify(1,@_); ($x->mantissa(),$x->exponent()); } ############################################################################## # rounding functions sub bfround { # precision: round to the $Nth digit left (+$n) or right (-$n) from the '.' # $n == 0 || $n == 1 => round to integer my $x = shift; my $self = ref($x) || $x; $x = $self->new($x) unless ref $x; my ($scale,$mode) = $x->_scale_p(@_); return $x if !defined $scale || $x->modify('bfround'); # no-op # no-op for BigInts if $n <= 0 $x->bround( $x->length()-$scale, $mode) if $scale > 0; delete $x->{_a}; # delete to save memory $x->{_p} = $scale; # store new _p $x; } sub _scan_for_nonzero { # internal, used by bround() to scan for non-zeros after a '5' my ($x,$pad,$xs,$len) = @_; return 0 if $len == 1; # "5" is trailed by invisible zeros my $follow = $pad - 1; return 0 if $follow > $len || $follow < 1; # use the string form to check whether only '0's follow or not substr ($xs,-$follow) =~ /[^0]/ ? 1 : 0; } sub fround { # Exists to make life easier for switch between MBF and MBI (should we # autoload fxxx() like MBF does for bxxx()?) my $x = shift; $x = $class->new($x) unless ref $x; $x->bround(@_); } sub bround { # accuracy: +$n preserve $n digits from left, # -$n preserve $n digits from right (f.i. for 0.1234 style in MBF) # no-op for $n == 0 # and overwrite the rest with 0's, return normalized number # do not return $x->bnorm(), but $x my $x = shift; $x = $class->new($x) unless ref $x; my ($scale,$mode) = $x->_scale_a(@_); return $x if !defined $scale || $x->modify('bround'); # no-op if ($x->is_zero() || $scale == 0) { $x->{_a} = $scale if !defined $x->{_a} || $x->{_a} > $scale; # 3 > 2 return $x; } return $x if $x->{sign} !~ /^[+-]$/; # inf, NaN # we have fewer digits than we want to scale to my $len = $x->length(); # convert $scale to a scalar in case it is an object (put's a limit on the # number length, but this would already limited by memory constraints), makes # it faster $scale = $scale->numify() if ref ($scale); # scale < 0, but > -len (not >=!) if (($scale < 0 && $scale < -$len-1) || ($scale >= $len)) { $x->{_a} = $scale if !defined $x->{_a} || $x->{_a} > $scale; # 3 > 2 return $x; } # count of 0's to pad, from left (+) or right (-): 9 - +6 => 3, or |-6| => 6 my ($pad,$digit_round,$digit_after); $pad = $len - $scale; $pad = abs($scale-1) if $scale < 0; # do not use digit(), it is very costly for binary => decimal # getting the entire string is also costly, but we need to do it only once my $xs = $CALC->_str($x->{value}); my $pl = -$pad-1; # pad: 123: 0 => -1, at 1 => -2, at 2 => -3, at 3 => -4 # pad+1: 123: 0 => 0, at 1 => -1, at 2 => -2, at 3 => -3 $digit_round = '0'; $digit_round = substr($xs,$pl,1) if $pad <= $len; $pl++; $pl ++ if $pad >= $len; $digit_after = '0'; $digit_after = substr($xs,$pl,1) if $pad > 0; # in case of 01234 we round down, for 6789 up, and only in case 5 we look # closer at the remaining digits of the original $x, remember decision my $round_up = 1; # default round up $round_up -- if ($mode eq 'trunc') || # trunc by round down ($digit_after =~ /[01234]/) || # round down anyway, # 6789 => round up ($digit_after eq '5') && # not 5000...0000 ($x->_scan_for_nonzero($pad,$xs,$len) == 0) && ( ($mode eq 'even') && ($digit_round =~ /[24680]/) || ($mode eq 'odd') && ($digit_round =~ /[13579]/) || ($mode eq '+inf') && ($x->{sign} eq '-') || ($mode eq '-inf') && ($x->{sign} eq '+') || ($mode eq 'zero') # round down if zero, sign adjusted below ); my $put_back = 0; # not yet modified if (($pad > 0) && ($pad <= $len)) { substr($xs,-$pad,$pad) = '0' x $pad; # replace with '00...' $put_back = 1; # need to put back } elsif ($pad > $len) { $x->bzero(); # round to '0' } if ($round_up) # what gave test above? { $put_back = 1; # need to put back $pad = $len, $xs = '0' x $pad if $scale < 0; # tlr: whack 0.51=>1.0 # we modify directly the string variant instead of creating a number and # adding it, since that is faster (we already have the string) my $c = 0; $pad ++; # for $pad == $len case while ($pad <= $len) { $c = substr($xs,-$pad,1) + 1; $c = '0' if $c eq '10'; substr($xs,-$pad,1) = $c; $pad++; last if $c != 0; # no overflow => early out } $xs = '1'.$xs if $c == 0; } $x->{value} = $CALC->_new($xs) if $put_back == 1; # put back, if needed $x->{_a} = $scale if $scale >= 0; if ($scale < 0) { $x->{_a} = $len+$scale; $x->{_a} = 0 if $scale < -$len; } $x; } sub bfloor { # return integer less or equal then number; no-op since it's already integer my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); $x->round(@r); } sub bceil { # return integer greater or equal then number; no-op since it's already int my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); $x->round(@r); } sub as_number { # An object might be asked to return itself as bigint on certain overloaded # operations. This does exactly this, so that sub classes can simple inherit # it or override with their own integer conversion routine. $_[0]->copy(); } sub as_hex { # return as hex string, with prefixed 0x my $x = shift; $x = $class->new($x) if !ref($x); return $x->bstr() if $x->{sign} !~ /^[+-]$/; # inf, nan etc my $s = ''; $s = $x->{sign} if $x->{sign} eq '-'; $s . $CALC->_as_hex($x->{value}); } sub as_bin { # return as binary string, with prefixed 0b my $x = shift; $x = $class->new($x) if !ref($x); return $x->bstr() if $x->{sign} !~ /^[+-]$/; # inf, nan etc my $s = ''; $s = $x->{sign} if $x->{sign} eq '-'; return $s . $CALC->_as_bin($x->{value}); } sub as_oct { # return as octal string, with prefixed 0 my $x = shift; $x = $class->new($x) if !ref($x); return $x->bstr() if $x->{sign} !~ /^[+-]$/; # inf, nan etc my $s = ''; $s = $x->{sign} if $x->{sign} eq '-'; return $s . $CALC->_as_oct($x->{value}); } ############################################################################## # private stuff (internal use only) sub objectify { # Convert strings and "foreign objects" to the objects we want. # The first argument, $count, is the number of following arguments that # objectify() looks at and converts to objects. The first is a classname. # If the given count is 0, all arguments will be used. # After the count is read, objectify obtains the name of the class to which # the following arguments are converted. If the second argument is a # reference, use the reference type as the class name. Otherwise, if it is # a string that looks like a class name, use that. Otherwise, use $class. # Caller: Gives us: # # $x->badd(1); => ref x, scalar y # Class->badd(1,2); => classname x (scalar), scalar x, scalar y # Class->badd(Class->(1),2); => classname x (scalar), ref x, scalar y # Math::BigInt::badd(1,2); => scalar x, scalar y # A shortcut for the common case $x->unary_op(): return (ref($_[1]), $_[1]) if (@_ == 2) && ($_[0]||0 == 1) && ref($_[1]); # Check the context. unless (wantarray) { require Carp; Carp::croak ("${class}::objectify() needs list context"); } # Get the number of arguments to objectify. my $count = shift; $count ||= @_; # Initialize the output array. my @a = @_; # If the first argument is a reference, use that reference type as our # class name. Otherwise, if the first argument looks like a class name, # then use that as our class name. Otherwise, use the default class name. { if (ref($a[0])) { # reference? unshift @a, ref($a[0]); last; } if ($a[0] =~ /^[A-Z].*::/) { # string with class name? last; } unshift @a, $class; # default class name } no strict 'refs'; # What we upgrade to, if anything. my $up = ${"$a[0]::upgrade"}; # Disable downgrading, because Math::BigFloat -> foo('1.0','2.0') needs # floats. my $down; if (defined ${"$a[0]::downgrade"}) { $down = ${"$a[0]::downgrade"}; ${"$a[0]::downgrade"} = undef; } for my $i (1 .. $count) { my $ref = ref $a[$i]; # If it is an object of the right class, all is fine. if ($ref eq $a[0]) { next; } # Don't do anything with undefs. unless (defined($a[$i])) { next; } # Perl scalars are fed to the appropriate constructor. unless ($ref) { $a[$i] = $a[0] -> new($a[$i]); next; } # Upgrading is OK, so skip further tests if the argument is upgraded. if (defined $up && $ref eq $up) { next; } # If we want a Math::BigInt, see if the object can become one. # Support the old misnomer as_number(). if ($a[0] eq 'Math::BigInt') { if ($a[$i] -> can('as_int')) { $a[$i] = $a[$i] -> as_int(); next; } if ($a[$i] -> can('as_number')) { $a[$i] = $a[$i] -> as_number(); next; } } # If we want a Math::BigFloat, see if the object can become one. if ($a[0] eq 'Math::BigFloat') { if ($a[$i] -> can('as_float')) { $a[$i] = $a[$i] -> as_float(); next; } } # Last resort. $a[$i] = $a[0] -> new($a[$i]); } # Reset the downgrading. ${"$a[0]::downgrade"} = $down; return @a; } sub _register_callback { my ($class,$callback) = @_; if (ref($callback) ne 'CODE') { require Carp; Carp::croak ("$callback is not a coderef"); } $CALLBACKS{$class} = $callback; } sub import { my $self = shift; $IMPORT++; # remember we did import() my @a; my $l = scalar @_; my $warn_or_die = 0; # 0 - no warn, 1 - warn, 2 - die for ( my $i = 0; $i < $l ; $i++ ) { if ($_[$i] eq ':constant') { # this causes overlord er load to step in overload::constant integer => sub { $self->new(shift) }, binary => sub { $self->new(shift) }; } elsif ($_[$i] eq 'upgrade') { # this causes upgrading $upgrade = $_[$i+1]; # or undef to disable $i++; } elsif ($_[$i] =~ /^(lib|try|only)\z/) { # this causes a different low lib to take care... $CALC = $_[$i+1] || ''; # lib => 1 (warn on fallback), try => 0 (no warn), only => 2 (die on fallback) $warn_or_die = 1 if $_[$i] eq 'lib'; $warn_or_die = 2 if $_[$i] eq 'only'; $i++; } else { push @a, $_[$i]; } } # any non :constant stuff is handled by our parent, Exporter if (@a > 0) { require Exporter; $self->SUPER::import(@a); # need it for subclasses $self->export_to_level(1,$self,@a); # need it for MBF } # try to load core math lib my @c = split /\s*,\s*/,$CALC; foreach (@c) { $_ =~ tr/a-zA-Z0-9://cd; # limit to sane characters } push @c, \'Calc' # if all fail, try these if $warn_or_die < 2; # but not for "only" $CALC = ''; # signal error foreach my $l (@c) { # fallback libraries are "marked" as \'string', extract string if nec. my $lib = $l; $lib = $$l if ref($l); next if ($lib || '') eq ''; $lib = 'Math::BigInt::'.$lib if $lib !~ /^Math::BigInt/i; $lib =~ s/\.pm$//; if ($] < 5.006) { # Perl < 5.6.0 dies with "out of memory!" when eval("") and ':constant' is # used in the same script, or eval("") inside import(). my @parts = split /::/, $lib; # Math::BigInt => Math BigInt my $file = pop @parts; $file .= '.pm'; # BigInt => BigInt.pm require File::Spec; $file = File::Spec->catfile (@parts, $file); eval { require "$file"; $lib->import( @c ); } } else { eval "use $lib qw/@c/;"; } if ($@ eq '') { my $ok = 1; # loaded it ok, see if the api_version() is high enough if ($lib->can('api_version') && $lib->api_version() >= 1.0) { $ok = 0; # api_version matches, check if it really provides anything we need for my $method (qw/ one two ten str num add mul div sub dec inc acmp len digit is_one is_zero is_even is_odd is_two is_ten zeros new copy check from_hex from_oct from_bin as_hex as_bin as_oct rsft lsft xor and or mod sqrt root fac pow modinv modpow log_int gcd /) { if (!$lib->can("_$method")) { if (($WARN{$lib}||0) < 2) { require Carp; Carp::carp ("$lib is missing method '_$method'"); $WARN{$lib} = 1; # still warn about the lib } $ok++; last; } } } if ($ok == 0) { $CALC = $lib; if ($warn_or_die > 0 && ref($l)) { require Carp; my $msg = "Math::BigInt: couldn't load specified math lib(s), fallback to $lib"; Carp::carp ($msg) if $warn_or_die == 1; Carp::croak ($msg) if $warn_or_die == 2; } last; # found a usable one, break } else { if (($WARN{$lib}||0) < 2) { my $ver = eval "\$$lib\::VERSION" || 'unknown'; require Carp; Carp::carp ("Cannot load outdated $lib v$ver, please upgrade"); $WARN{$lib} = 2; # never warn again } } } } if ($CALC eq '') { require Carp; if ($warn_or_die == 2) { Carp::croak ("Couldn't load specified math lib(s) and fallback disallowed"); } else { Carp::croak ("Couldn't load any math lib(s), not even fallback to Calc.pm"); } } # notify callbacks foreach my $class (keys %CALLBACKS) { &{$CALLBACKS{$class}}($CALC); } # Fill $CAN with the results of $CALC->can(...) for emulating lower math lib # functions %CAN = (); for my $method (qw/ signed_and signed_or signed_xor /) { $CAN{$method} = $CALC->can("_$method") ? 1 : 0; } # import done } sub from_hex { # Create a bigint from a hexadecimal string. my ($self, $str) = @_; if ($str =~ s/ ^ ( [+-]? ) (0?x)? ( [0-9a-fA-F]* ( _ [0-9a-fA-F]+ )* ) $ //x) { # Get a "clean" version of the string, i.e., non-emtpy and with no # underscores or invalid characters. my $sign = $1; my $chrs = $3; $chrs =~ tr/_//d; $chrs = '0' unless CORE::length $chrs; # Initialize output. my $x = Math::BigInt->bzero(); # The library method requires a prefix. $x->{value} = $CALC->_from_hex('0x' . $chrs); # Place the sign. if ($sign eq '-' && ! $CALC->_is_zero($x->{value})) { $x->{sign} = '-'; } return $x; } # CORE::hex() parses as much as it can, and ignores any trailing garbage. # For backwards compatibility, we return NaN. return $self->bnan(); } sub from_oct { # Create a bigint from an octal string. my ($self, $str) = @_; if ($str =~ s/ ^ ( [+-]? ) ( [0-7]* ( _ [0-7]+ )* ) $ //x) { # Get a "clean" version of the string, i.e., non-emtpy and with no # underscores or invalid characters. my $sign = $1; my $chrs = $2; $chrs =~ tr/_//d; $chrs = '0' unless CORE::length $chrs; # Initialize output. my $x = Math::BigInt->bzero(); # The library method requires a prefix. $x->{value} = $CALC->_from_oct('0' . $chrs); # Place the sign. if ($sign eq '-' && ! $CALC->_is_zero($x->{value})) { $x->{sign} = '-'; } return $x; } # CORE::oct() parses as much as it can, and ignores any trailing garbage. # For backwards compatibility, we return NaN. return $self->bnan(); } sub from_bin { # Create a bigint from a binary string. my ($self, $str) = @_; if ($str =~ s/ ^ ( [+-]? ) (0?b)? ( [01]* ( _ [01]+ )* ) $ //x) { # Get a "clean" version of the string, i.e., non-emtpy and with no # underscores or invalid characters. my $sign = $1; my $chrs = $3; $chrs =~ tr/_//d; $chrs = '0' unless CORE::length $chrs; # Initialize output. my $x = Math::BigInt->bzero(); # The library method requires a prefix. $x->{value} = $CALC->_from_bin('0b' . $chrs); # Place the sign. if ($sign eq '-' && ! $CALC->_is_zero($x->{value})) { $x->{sign} = '-'; } return $x; } # For consistency with from_hex() and from_oct(), we return NaN when the # input is invalid. return $self->bnan(); } sub _split { # input: num_str; output: undef for invalid or # (\$mantissa_sign,\$mantissa_value,\$mantissa_fraction,\$exp_sign,\$exp_value) # Internal, take apart a string and return the pieces. # Strip leading/trailing whitespace, leading zeros, underscore and reject # invalid input. my $x = shift; # strip white space at front, also extraneous leading zeros $x =~ s/^\s*([-]?)0*([0-9])/$1$2/g; # will not strip ' .2' $x =~ s/^\s+//; # but this will $x =~ s/\s+$//g; # strip white space at end # shortcut, if nothing to split, return early if ($x =~ /^[+-]?[0-9]+\z/) { $x =~ s/^([+-])0*([0-9])/$2/; my $sign = $1 || '+'; return (\$sign, \$x, \'', \'', \0); } # invalid starting char? return if $x !~ /^[+-]?(\.?[0-9]|0b[0-1]|0x[0-9a-fA-F])/; return Math::BigInt->from_hex($x) if $x =~ /^[+-]?0x/; # hex string return Math::BigInt->from_bin($x) if $x =~ /^[+-]?0b/; # binary string # strip underscores between digits $x =~ s/([0-9])_([0-9])/$1$2/g; $x =~ s/([0-9])_([0-9])/$1$2/g; # do twice for 1_2_3 # some possible inputs: # 2.1234 # 0.12 # 1 # 1E1 # 2.134E1 # 434E-10 # 1.02009E-2 # .2 # 1_2_3.4_5_6 # 1.4E1_2_3 # 1e3 # +.2 # 0e999 my ($m,$e,$last) = split /[Ee]/,$x; return if defined $last; # last defined => 1e2E3 or others $e = '0' if !defined $e || $e eq ""; # sign,value for exponent,mantint,mantfrac my ($es,$ev,$mis,$miv,$mfv); # valid exponent? if ($e =~ /^([+-]?)0*([0-9]+)$/) # strip leading zeros { $es = $1; $ev = $2; # valid mantissa? return if $m eq '.' || $m eq ''; my ($mi,$mf,$lastf) = split /\./,$m; return if defined $lastf; # lastf defined => 1.2.3 or others $mi = '0' if !defined $mi; $mi .= '0' if $mi =~ /^[\-\+]?$/; $mf = '0' if !defined $mf || $mf eq ''; if ($mi =~ /^([+-]?)0*([0-9]+)$/) # strip leading zeros { $mis = $1||'+'; $miv = $2; return unless ($mf =~ /^([0-9]*?)0*$/); # strip trailing zeros $mfv = $1; # handle the 0e999 case here $ev = 0 if $miv eq '0' && $mfv eq ''; return (\$mis,\$miv,\$mfv,\$es,\$ev); } } return; # NaN, not a number } ############################################################################## # internal calculation routines (others are in Math::BigInt::Calc etc) sub __lcm { # (BINT or num_str, BINT or num_str) return BINT # does modify first argument # LCM my ($x,$ty) = @_; return $x->bnan() if ($x->{sign} eq $nan) || ($ty->{sign} eq $nan); my $method = ref($x) . '::bgcd'; no strict 'refs'; $x * $ty / &$method($x,$ty); } ############################################################################### # trigonometric functions sub bpi { # Calculate PI to N digits. Unless upgrading is in effect, returns the # result truncated to an integer, that is, always returns '3'. my ($self,$n) = @_; if (@_ == 1) { # called like Math::BigInt::bpi(10); $n = $self; $self = $class; } $self = ref($self) if ref($self); return $upgrade->new($n) if defined $upgrade; # hard-wired to "3" $self->new(3); } sub bcos { # Calculate cosinus(x) to N digits. Unless upgrading is in effect, returns the # result truncated to an integer. my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('bcos'); return $x->bnan() if $x->{sign} !~ /^[+-]\z/; # -inf +inf or NaN => NaN return $upgrade->new($x)->bcos(@r) if defined $upgrade; require Math::BigFloat; # calculate the result and truncate it to integer my $t = Math::BigFloat->new($x)->bcos(@r)->as_int(); $x->bone() if $t->is_one(); $x->bzero() if $t->is_zero(); $x->round(@r); } sub bsin { # Calculate sinus(x) to N digits. Unless upgrading is in effect, returns the # result truncated to an integer. my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('bsin'); return $x->bnan() if $x->{sign} !~ /^[+-]\z/; # -inf +inf or NaN => NaN return $upgrade->new($x)->bsin(@r) if defined $upgrade; require Math::BigFloat; # calculate the result and truncate it to integer my $t = Math::BigFloat->new($x)->bsin(@r)->as_int(); $x->bone() if $t->is_one(); $x->bzero() if $t->is_zero(); $x->round(@r); } sub batan2 { # calculate arcus tangens of ($y/$x) # set up parameters my ($self,$y,$x,@r) = (ref($_[0]),@_); # objectify is costly, so avoid it if ((!ref($_[0])) || (ref($_[0]) ne ref($_[1]))) { ($self,$y,$x,@r) = objectify(2,@_); } return $y if $y->modify('batan2'); return $y->bnan() if ($y->{sign} eq $nan) || ($x->{sign} eq $nan); # Y X # != 0 -inf result is +- pi if ($x->is_inf() || $y->is_inf()) { # upgrade to BigFloat etc. return $upgrade->new($y)->batan2($upgrade->new($x),@r) if defined $upgrade; if ($y->is_inf()) { if ($x->{sign} eq '-inf') { # calculate 3 pi/4 => 2.3.. => 2 $y->bone( substr($y->{sign},0,1) ); $y->bmul($self->new(2)); } elsif ($x->{sign} eq '+inf') { # calculate pi/4 => 0.7 => 0 $y->bzero(); } else { # calculate pi/2 => 1.5 => 1 $y->bone( substr($y->{sign},0,1) ); } } else { if ($x->{sign} eq '+inf') { # calculate pi/4 => 0.7 => 0 $y->bzero(); } else { # PI => 3.1415.. => 3 $y->bone( substr($y->{sign},0,1) ); $y->bmul($self->new(3)); } } return $y; } return $upgrade->new($y)->batan2($upgrade->new($x),@r) if defined $upgrade; require Math::BigFloat; my $r = Math::BigFloat->new($y)->batan2(Math::BigFloat->new($x),@r)->as_int(); $x->{value} = $r->{value}; $x->{sign} = $r->{sign}; $x; } sub batan { # Calculate arcus tangens of x to N digits. Unless upgrading is in effect, returns the # result truncated to an integer. my ($self,$x,@r) = ref($_[0]) ? (undef,@_) : objectify(1,@_); return $x if $x->modify('batan'); return $x->bnan() if $x->{sign} !~ /^[+-]\z/; # -inf +inf or NaN => NaN return $upgrade->new($x)->batan(@r) if defined $upgrade; # calculate the result and truncate it to integer my $t = Math::BigFloat->new($x)->batan(@r); $x->{value} = $CALC->_new( $x->as_int()->bstr() ); $x->round(@r); } ############################################################################### # this method returns 0 if the object can be modified, or 1 if not. # We use a fast constant sub() here, to avoid costly calls. Subclasses # may override it with special code (f.i. Math::BigInt::Constant does so) sub modify () { 0; } 1; __END__ =pod =head1 NAME Math::BigInt - Arbitrary size integer/float math package =head1 SYNOPSIS use Math::BigInt; # or make it faster with huge numbers: install (optional) # Math::BigInt::GMP and always use (it will fall back to # pure Perl if the GMP library is not installed): # (See also the L section!) # will warn if Math::BigInt::GMP cannot be found use Math::BigInt lib => 'GMP'; # to suppress the warning use this: # use Math::BigInt try => 'GMP'; # dies if GMP cannot be loaded: # use Math::BigInt only => 'GMP'; my $str = '1234567890'; my @values = (64,74,18); my $n = 1; my $sign = '-'; # Number creation my $x = Math::BigInt->new($str); # defaults to 0 my $y = $x->copy(); # make a true copy my $nan = Math::BigInt->bnan(); # create a NotANumber my $zero = Math::BigInt->bzero(); # create a +0 my $inf = Math::BigInt->binf(); # create a +inf my $inf = Math::BigInt->binf('-'); # create a -inf my $one = Math::BigInt->bone(); # create a +1 my $mone = Math::BigInt->bone('-'); # create a -1 my $pi = Math::BigInt->bpi(); # returns '3' # see Math::BigFloat::bpi() $h = Math::BigInt->new('0x123'); # from hexadecimal $b = Math::BigInt->new('0b101'); # from binary $o = Math::BigInt->from_oct('0101'); # from octal # Testing (don't modify their arguments) # (return true if the condition is met, otherwise false) $x->is_zero(); # if $x is +0 $x->is_nan(); # if $x is NaN $x->is_one(); # if $x is +1 $x->is_one('-'); # if $x is -1 $x->is_odd(); # if $x is odd $x->is_even(); # if $x is even $x->is_pos(); # if $x > 0 $x->is_neg(); # if $x < 0 $x->is_inf($sign); # if $x is +inf, or -inf (sign is default '+') $x->is_int(); # if $x is an integer (not a float) # comparing and digit/sign extraction $x->bcmp($y); # compare numbers (undef,<0,=0,>0) $x->bacmp($y); # compare absolutely (undef,<0,=0,>0) $x->sign(); # return the sign, either +,- or NaN $x->digit($n); # return the nth digit, counting from right $x->digit(-$n); # return the nth digit, counting from left # The following all modify their first argument. If you want to pre- # serve $x, use $z = $x->copy()->bXXX($y); See under L for # why this is necessary when mixing $a = $b assignments with non-over- # loaded math. $x->bzero(); # set $x to 0 $x->bnan(); # set $x to NaN $x->bone(); # set $x to +1 $x->bone('-'); # set $x to -1 $x->binf(); # set $x to inf $x->binf('-'); # set $x to -inf $x->bneg(); # negation $x->babs(); # absolute value $x->bsgn(); # sign function (-1, 0, 1, or NaN) $x->bnorm(); # normalize (no-op in BigInt) $x->bnot(); # two's complement (bit wise not) $x->binc(); # increment $x by 1 $x->bdec(); # decrement $x by 1 $x->badd($y); # addition (add $y to $x) $x->bsub($y); # subtraction (subtract $y from $x) $x->bmul($y); # multiplication (multiply $x by $y) $x->bdiv($y); # divide, set $x to quotient # return (quo,rem) or quo if scalar $x->bmuladd($y,$z); # $x = $x * $y + $z $x->bmod($y); # modulus (x % y) $x->bmodpow($y,$mod); # modular exponentiation (($x ** $y) % $mod) $x->bmodinv($mod); # modular multiplicative inverse $x->bpow($y); # power of arguments (x ** y) $x->blsft($y); # left shift in base 2 $x->brsft($y); # right shift in base 2 # returns (quo,rem) or quo if in sca- # lar context $x->blsft($y,$n); # left shift by $y places in base $n $x->brsft($y,$n); # right shift by $y places in base $n # returns (quo,rem) or quo if in sca- # lar context $x->band($y); # bitwise and $x->bior($y); # bitwise inclusive or $x->bxor($y); # bitwise exclusive or $x->bnot(); # bitwise not (two's complement) $x->bsqrt(); # calculate square-root $x->broot($y); # $y'th root of $x (e.g. $y == 3 => cubic root) $x->bfac(); # factorial of $x (1*2*3*4*..$x) $x->bnok($y); # x over y (binomial coefficient n over k) $x->blog(); # logarithm of $x to base e (Euler's number) $x->blog($base); # logarithm of $x to base $base (f.i. 2) $x->bexp(); # calculate e ** $x where e is Euler's number $x->round($A,$P,$mode); # round to accuracy or precision using # mode $mode $x->bround($n); # accuracy: preserve $n digits $x->bfround($n); # $n > 0: round $nth digits, # $n < 0: round to the $nth digit after the # dot, no-op for BigInts # The following do not modify their arguments in BigInt (are no-ops), # but do so in BigFloat: $x->bfloor(); # return integer less or equal than $x $x->bceil(); # return integer greater or equal than $x # The following do not modify their arguments: # greatest common divisor (no OO style) my $gcd = Math::BigInt::bgcd(@values); # lowest common multiple (no OO style) my $lcm = Math::BigInt::blcm(@values); $x->length(); # return number of digits in number ($xl,$f) = $x->length(); # length of number and length of fraction # part, latter is always 0 digits long # for BigInts $x->exponent(); # return exponent as BigInt $x->mantissa(); # return (signed) mantissa as BigInt $x->parts(); # return (mantissa,exponent) as BigInt $x->copy(); # make a true copy of $x (unlike $y = $x;) $x->as_int(); # return as BigInt (in BigInt: same as copy()) $x->numify(); # return as scalar (might overflow!) # conversion to string (do not modify their argument) $x->bstr(); # normalized string (e.g. '3') $x->bsstr(); # norm. string in scientific notation (e.g. '3E0') $x->as_hex(); # as signed hexadecimal string with prefixed 0x $x->as_bin(); # as signed binary string with prefixed 0b $x->as_oct(); # as signed octal string with prefixed 0 # precision and accuracy (see section about rounding for more) $x->precision(); # return P of $x (or global, if P of $x undef) $x->precision($n); # set P of $x to $n $x->accuracy(); # return A of $x (or global, if A of $x undef) $x->accuracy($n); # set A $x to $n # Global methods Math::BigInt->precision(); # get/set global P for all BigInt objects Math::BigInt->accuracy(); # get/set global A for all BigInt objects Math::BigInt->round_mode(); # get/set global round mode, one of # 'even', 'odd', '+inf', '-inf', 'zero', # 'trunc' or 'common' Math::BigInt->config(); # return hash containing configuration =head1 DESCRIPTION All operators (including basic math operations) are overloaded if you declare your big integers as $i = new Math::BigInt '123_456_789_123_456_789'; Operations with overloaded operators preserve the arguments which is exactly what you expect. =over 2 =item Input Input values to these routines may be any string, that looks like a number and results in an integer, including hexadecimal and binary numbers. Scalars holding numbers may also be passed, but note that non-integer numbers may already have lost precision due to the conversion to float. Quote your input if you want BigInt to see all the digits: $x = Math::BigInt->new(12345678890123456789); # bad $x = Math::BigInt->new('12345678901234567890'); # good You can include one underscore between any two digits. This means integer values like 1.01E2 or even 1000E-2 are also accepted. Non-integer values result in NaN. Hexadecimal (prefixed with "0x") and binary numbers (prefixed with "0b") are accepted, too. Please note that octal numbers are not recognized by new(), so the following will print "123": perl -MMath::BigInt -le 'print Math::BigInt->new("0123")' To convert an octal number, use from_oct(); perl -MMath::BigInt -le 'print Math::BigInt->from_oct("0123")' Currently, Math::BigInt::new() defaults to 0, while Math::BigInt::new('') results in 'NaN'. This might change in the future, so use always the following explicit forms to get a zero or NaN: $zero = Math::BigInt->bzero(); $nan = Math::BigInt->bnan(); C on a BigInt object is now effectively a no-op, since the numbers are always stored in normalized form. If passed a string, creates a BigInt object from the input. =item Output Output values are BigInt objects (normalized), except for the methods which return a string (see L). Some routines (C, C, C, C, C, etc.) return true or false, while others (C, C) return either undef (if NaN is involved), <0, 0 or >0 and are suited for sort. =back =head1 METHODS Each of the methods below (except config(), accuracy() and precision()) accepts three additional parameters. These arguments C<$A>, C<$P> and C<$R> are C, C and C. Please see the section about L for more information. =head2 config() use Data::Dumper; print Dumper ( Math::BigInt->config() ); print Math::BigInt->config()->{lib},"\n"; Returns a hash containing the configuration, e.g. the version number, lib loaded etc. The following hash keys are currently filled in with the appropriate information. key Description Example ============================================================ lib Name of the low-level math library Math::BigInt::Calc lib_version Version of low-level math library (see 'lib') 0.30 class The class name of config() you just called Math::BigInt upgrade To which class math operations might be upgraded Math::BigFloat downgrade To which class math operations might be downgraded undef precision Global precision undef accuracy Global accuracy undef round_mode Global round mode even version version number of the class you used 1.61 div_scale Fallback accuracy for div 40 trap_nan If true, traps creation of NaN via croak() 1 trap_inf If true, traps creation of +inf/-inf via croak() 1 The following values can be set by passing C a reference to a hash: trap_inf trap_nan upgrade downgrade precision accuracy round_mode div_scale Example: $new_cfg = Math::BigInt->config( { trap_inf => 1, precision => 5 } ); =head2 accuracy() $x->accuracy(5); # local for $x CLASS->accuracy(5); # global for all members of CLASS # Note: This also applies to new()! $A = $x->accuracy(); # read out accuracy that affects $x $A = CLASS->accuracy(); # read out global accuracy Set or get the global or local accuracy, aka how many significant digits the results have. If you set a global accuracy, then this also applies to new()! Warning! The accuracy I, e.g. once you created a number under the influence of C<< CLASS->accuracy($A) >>, all results from math operations with that number will also be rounded. In most cases, you should probably round the results explicitly using one of L, L or L or by passing the desired accuracy to the math operation as additional parameter: my $x = Math::BigInt->new(30000); my $y = Math::BigInt->new(7); print scalar $x->copy()->bdiv($y, 2); # print 4300 print scalar $x->copy()->bdiv($y)->bround(2); # print 4300 Please see the section about L for further details. Value must be greater than zero. Pass an undef value to disable it: $x->accuracy(undef); Math::BigInt->accuracy(undef); Returns the current accuracy. For C<< $x->accuracy() >> it will return either the local accuracy, or if not defined, the global. This means the return value represents the accuracy that will be in effect for $x: $y = Math::BigInt->new(1234567); # unrounded print Math::BigInt->accuracy(4),"\n"; # set 4, print 4 $x = Math::BigInt->new(123456); # $x will be automatic- # ally rounded! print "$x $y\n"; # '123500 1234567' print $x->accuracy(),"\n"; # will be 4 print $y->accuracy(),"\n"; # also 4, since global is 4 print Math::BigInt->accuracy(5),"\n"; # set to 5, print 5 print $x->accuracy(),"\n"; # still 4 print $y->accuracy(),"\n"; # 5, since global is 5 Note: Works also for subclasses like Math::BigFloat. Each class has it's own globals separated from Math::BigInt, but it is possible to subclass Math::BigInt and make the globals of the subclass aliases to the ones from Math::BigInt. =head2 precision() $x->precision(-2); # local for $x, round at the second # digit right of the dot $x->precision(2); # ditto, round at the second digit left # of the dot CLASS->precision(5); # Global for all members of CLASS # This also applies to new()! CLASS->precision(-5); # ditto $P = CLASS->precision(); # read out global precision $P = $x->precision(); # read out precision that affects $x Note: You probably want to use L instead. With L you set the number of digits each result should have, with L you set the place where to round! C sets or gets the global or local precision, aka at which digit before or after the dot to round all results. A set global precision also applies to all newly created numbers! In Math::BigInt, passing a negative number precision has no effect since no numbers have digits after the dot. In L, it will round all results to P digits after the dot. Please see the section about L for further details. Pass an undef value to disable it: $x->precision(undef); Math::BigInt->precision(undef); Returns the current precision. For C<< $x->precision() >> it will return either the local precision of $x, or if not defined, the global. This means the return value represents the prevision that will be in effect for $x: $y = Math::BigInt->new(1234567); # unrounded print Math::BigInt->precision(4),"\n"; # set 4, print 4 $x = Math::BigInt->new(123456); # will be automatically rounded print $x; # print "120000"! Note: Works also for subclasses like L. Each class has its own globals separated from Math::BigInt, but it is possible to subclass Math::BigInt and make the globals of the subclass aliases to the ones from Math::BigInt. =head2 brsft() $x->brsft($y,$n); Shifts $x right by $y in base $n. Default is base 2, used are usually 10 and 2, but others work, too. Right shifting usually amounts to dividing $x by $n ** $y and truncating the result: $x = Math::BigInt->new(10); $x->brsft(1); # same as $x >> 1: 5 $x = Math::BigInt->new(1234); $x->brsft(2,10); # result 12 There is one exception, and that is base 2 with negative $x: $x = Math::BigInt->new(-5); print $x->brsft(1); This will print -3, not -2 (as it would if you divide -5 by 2 and truncate the result). =head2 new() $x = Math::BigInt->new($str,$A,$P,$R); Creates a new BigInt object from a scalar or another BigInt object. The input is accepted as decimal, hex (with leading '0x') or binary (with leading '0b'). See L for more info on accepted input formats. =head2 from_oct() $x = Math::BigInt->from_oct("0775"); # input is octal Interpret the input as an octal string and return the corresponding value. A "0" (zero) prefix is optional. A single underscore character may be placed right after the prefix, if present, or between any two digits. If the input is invalid, a NaN is returned. =head2 from_hex() $x = Math::BigInt->from_hex("0xcafe"); # input is hexadecimal Interpret input as a hexadecimal string. A "0x" or "x" prefix is optional. A single underscore character may be placed right after the prefix, if present, or between any two digits. If the input is invalid, a NaN is returned. =head2 from_bin() $x = Math::BigInt->from_bin("0b10011"); # input is binary Interpret the input as a binary string. A "0b" or "b" prefix is optional. A single underscore character may be placed right after the prefix, if present, or between any two digits. If the input is invalid, a NaN is returned. =head2 bnan() $x = Math::BigInt->bnan(); Creates a new BigInt object representing NaN (Not A Number). If used on an object, it will set it to NaN: $x->bnan(); =head2 bzero() $x = Math::BigInt->bzero(); Creates a new BigInt object representing zero. If used on an object, it will set it to zero: $x->bzero(); =head2 binf() $x = Math::BigInt->binf($sign); Creates a new BigInt object representing infinity. The optional argument is either '-' or '+', indicating whether you want infinity or minus infinity. If used on an object, it will set it to infinity: $x->binf(); $x->binf('-'); =head2 bone() $x = Math::BigInt->binf($sign); Creates a new BigInt object representing one. The optional argument is either '-' or '+', indicating whether you want one or minus one. If used on an object, it will set it to one: $x->bone(); # +1 $x->bone('-'); # -1 =head2 is_one()/is_zero()/is_nan()/is_inf() $x->is_zero(); # true if arg is +0 $x->is_nan(); # true if arg is NaN $x->is_one(); # true if arg is +1 $x->is_one('-'); # true if arg is -1 $x->is_inf(); # true if +inf $x->is_inf('-'); # true if -inf (sign is default '+') These methods all test the BigInt for being one specific value and return true or false depending on the input. These are faster than doing something like: if ($x == 0) =head2 is_pos()/is_neg()/is_positive()/is_negative() $x->is_pos(); # true if > 0 $x->is_neg(); # true if < 0 The methods return true if the argument is positive or negative, respectively. C is neither positive nor negative, while C<+inf> counts as positive, and C<-inf> is negative. A C is neither positive nor negative. These methods are only testing the sign, and not the value. C and C are aliases to C and C, respectively. C and C were introduced in v1.36, while C and C were only introduced in v1.68. =head2 is_odd()/is_even()/is_int() $x->is_odd(); # true if odd, false for even $x->is_even(); # true if even, false for odd $x->is_int(); # true if $x is an integer The return true when the argument satisfies the condition. C, C<+inf>, C<-inf> are not integers and are neither odd nor even. In BigInt, all numbers except C, C<+inf> and C<-inf> are integers. =head2 bcmp() $x->bcmp($y); Compares $x with $y and takes the sign into account. Returns -1, 0, 1 or undef. =head2 bacmp() $x->bacmp($y); Compares $x with $y while ignoring their sign. Returns -1, 0, 1 or undef. =head2 sign() $x->sign(); Return the sign, of $x, meaning either C<+>, C<->, C<-inf>, C<+inf> or NaN. If you want $x to have a certain sign, use one of the following methods: $x->babs(); # '+' $x->babs()->bneg(); # '-' $x->bnan(); # 'NaN' $x->binf(); # '+inf' $x->binf('-'); # '-inf' =head2 digit() $x->digit($n); # return the nth digit, counting from right If C<$n> is negative, returns the digit counting from left. =head2 bneg() $x->bneg(); Negate the number, e.g. change the sign between '+' and '-', or between '+inf' and '-inf', respectively. Does nothing for NaN or zero. =head2 babs() $x->babs(); Set the number to its absolute value, e.g. change the sign from '-' to '+' and from '-inf' to '+inf', respectively. Does nothing for NaN or positive numbers. =head2 bsgn() $x->bsgn(); Signum function. Set the number to -1, 0, or 1, depending on whether the number is negative, zero, or positive, respectivly. Does not modify NaNs. =head2 bnorm() $x->bnorm(); # normalize (no-op) =head2 bnot() $x->bnot(); Two's complement (bitwise not). This is equivalent to $x->binc()->bneg(); but faster. =head2 binc() $x->binc(); # increment x by 1 =head2 bdec() $x->bdec(); # decrement x by 1 =head2 badd() $x->badd($y); # addition (add $y to $x) =head2 bsub() $x->bsub($y); # subtraction (subtract $y from $x) =head2 bmul() $x->bmul($y); # multiplication (multiply $x by $y) =head2 bmuladd() $x->bmuladd($y,$z); Multiply $x by $y, and then add $z to the result, This method was added in v1.87 of Math::BigInt (June 2007). =head2 bdiv() $x->bdiv($y); # divide, set $x to quotient # return (quo,rem) or quo if scalar =head2 bmod() $x->bmod($y); # modulus (x % y) =head2 bmodinv() $x->bmodinv($mod); # modular multiplicative inverse Returns the multiplicative inverse of C<$x> modulo C<$mod>. If $y = $x -> copy() -> bmodinv($mod) then C<$y> is the number closest to zero, and with the same sign as C<$mod>, satisfying ($x * $y) % $mod = 1 % $mod If C<$x> and C<$y> are non-zero, they must be relative primes, i.e., C. 'C' is returned when no modular multiplicative inverse exists. =head2 bmodpow() $num->bmodpow($exp,$mod); # modular exponentiation # ($num**$exp % $mod) Returns the value of C<$num> taken to the power C<$exp> in the modulus C<$mod> using binary exponentiation. C is far superior to writing $num ** $exp % $mod because it is much faster - it reduces internal variables into the modulus whenever possible, so it operates on smaller numbers. C also supports negative exponents. bmodpow($num, -1, $mod) is exactly equivalent to bmodinv($num, $mod) =head2 bpow() $x->bpow($y); # power of arguments (x ** y) =head2 blog() $x->blog($base, $accuracy); # logarithm of x to the base $base If C<$base> is not defined, Euler's number (e) is used: print $x->blog(undef, 100); # log(x) to 100 digits =head2 bexp() $x->bexp($accuracy); # calculate e ** X Calculates the expression C where C is Euler's number. This method was added in v1.82 of Math::BigInt (April 2007). See also L. =head2 bnok() $x->bnok($y); # x over y (binomial coefficient n over k) Calculates the binomial coefficient n over k, also called the "choose" function. The result is equivalent to: ( n ) n! | - | = ------- ( k ) k!(n-k)! This method was added in v1.84 of Math::BigInt (April 2007). =head2 bpi() print Math::BigInt->bpi(100), "\n"; # 3 Returns PI truncated to an integer, with the argument being ignored. This means under BigInt this always returns C<3>. If upgrading is in effect, returns PI, rounded to N digits with the current rounding mode: use Math::BigFloat; use Math::BigInt upgrade => Math::BigFloat; print Math::BigInt->bpi(3), "\n"; # 3.14 print Math::BigInt->bpi(100), "\n"; # 3.1415.... This method was added in v1.87 of Math::BigInt (June 2007). =head2 bcos() my $x = Math::BigInt->new(1); print $x->bcos(100), "\n"; Calculate the cosinus of $x, modifying $x in place. In BigInt, unless upgrading is in effect, the result is truncated to an integer. This method was added in v1.87 of Math::BigInt (June 2007). =head2 bsin() my $x = Math::BigInt->new(1); print $x->bsin(100), "\n"; Calculate the sinus of $x, modifying $x in place. In BigInt, unless upgrading is in effect, the result is truncated to an integer. This method was added in v1.87 of Math::BigInt (June 2007). =head2 batan2() my $x = Math::BigInt->new(1); my $y = Math::BigInt->new(1); print $y->batan2($x), "\n"; Calculate the arcus tangens of C<$y> divided by C<$x>, modifying $y in place. In BigInt, unless upgrading is in effect, the result is truncated to an integer. This method was added in v1.87 of Math::BigInt (June 2007). =head2 batan() my $x = Math::BigFloat->new(0.5); print $x->batan(100), "\n"; Calculate the arcus tangens of $x, modifying $x in place. In BigInt, unless upgrading is in effect, the result is truncated to an integer. This method was added in v1.87 of Math::BigInt (June 2007). =head2 blsft() $x->blsft($y); # left shift in base 2 $x->blsft($y,$n); # left shift, in base $n (like 10) =head2 brsft() $x->brsft($y); # right shift in base 2 $x->brsft($y,$n); # right shift, in base $n (like 10) =head2 band() $x->band($y); # bitwise and =head2 bior() $x->bior($y); # bitwise inclusive or =head2 bxor() $x->bxor($y); # bitwise exclusive or =head2 bnot() $x->bnot(); # bitwise not (two's complement) =head2 bsqrt() $x->bsqrt(); # calculate square-root =head2 broot() $x->broot($N); Calculates the N'th root of C<$x>. =head2 bfac() $x->bfac(); # factorial of $x (1*2*3*4*..$x) =head2 round() $x->round($A,$P,$round_mode); Round $x to accuracy C<$A> or precision C<$P> using the round mode C<$round_mode>. =head2 bround() $x->bround($N); # accuracy: preserve $N digits =head2 bfround() $x->bfround($N); If N is > 0, rounds to the Nth digit from the left. If N < 0, rounds to the Nth digit after the dot. Since BigInts are integers, the case N < 0 is a no-op for them. Examples: Input N Result =================================================== 123456.123456 3 123500 123456.123456 2 123450 123456.123456 -2 123456.12 123456.123456 -3 123456.123 =head2 bfloor() $x->bfloor(); Set $x to the integer less or equal than $x. This is a no-op in BigInt, but does change $x in BigFloat. =head2 bceil() $x->bceil(); Set $x to the integer greater or equal than $x. This is a no-op in BigInt, but does change $x in BigFloat. =head2 bgcd() bgcd(@values); # greatest common divisor (no OO style) =head2 blcm() blcm(@values); # lowest common multiple (no OO style) head2 length() $x->length(); ($xl,$fl) = $x->length(); Returns the number of digits in the decimal representation of the number. In list context, returns the length of the integer and fraction part. For BigInt's, the length of the fraction part will always be 0. =head2 exponent() $x->exponent(); Return the exponent of $x as BigInt. =head2 mantissa() $x->mantissa(); Return the signed mantissa of $x as BigInt. =head2 parts() $x->parts(); # return (mantissa,exponent) as BigInt =head2 copy() $x->copy(); # make a true copy of $x (unlike $y = $x;) =head2 as_int()/as_number() $x->as_int(); Returns $x as a BigInt (truncated towards zero). In BigInt this is the same as C. C is an alias to this method. C was introduced in v1.22, while C was only introduced in v1.68. =head2 bstr() $x->bstr(); Returns a normalized string representation of C<$x>. =head2 bsstr() $x->bsstr(); # normalized string in scientific notation =head2 as_hex() $x->as_hex(); # as signed hexadecimal string with prefixed 0x =head2 as_bin() $x->as_bin(); # as signed binary string with prefixed 0b =head2 as_oct() $x->as_oct(); # as signed octal string with prefixed 0 =head2 numify() print $x->numify(); This returns a normal Perl scalar from $x. It is used automatically whenever a scalar is needed, for instance in array index operations. This loses precision, to avoid this use L instead. =head2 modify() $x->modify('bpowd'); This method returns 0 if the object can be modified with the given operation, or 1 if not. This is used for instance by L. =head2 upgrade()/downgrade() Set/get the class for downgrade/upgrade operations. Thuis is used for instance by L. The defaults are '', thus the following operation will create a BigInt, not a BigFloat: my $i = Math::BigInt->new(123); my $f = Math::BigFloat->new('123.1'); print $i + $f,"\n"; # print 246 =head2 div_scale() Set/get the number of digits for the default precision in divide operations. =head2 round_mode() Set/get the current round mode. =head1 ACCURACY and PRECISION Since version v1.33, Math::BigInt and Math::BigFloat have full support for accuracy and precision based rounding, both automatically after every operation, as well as manually. This section describes the accuracy/precision handling in Math::Big* as it used to be and as it is now, complete with an explanation of all terms and abbreviations. Not yet implemented things (but with correct description) are marked with '!', things that need to be answered are marked with '?'. In the next paragraph follows a short description of terms used here (because these may differ from terms used by others people or documentation). During the rest of this document, the shortcuts A (for accuracy), P (for precision), F (fallback) and R (rounding mode) will be used. =head2 Precision P A fixed number of digits before (positive) or after (negative) the decimal point. For example, 123.45 has a precision of -2. 0 means an integer like 123 (or 120). A precision of 2 means two digits to the left of the decimal point are zero, so 123 with P = 1 becomes 120. Note that numbers with zeros before the decimal point may have different precisions, because 1200 can have p = 0, 1 or 2 (depending on what the initial value was). It could also have p < 0, when the digits after the decimal point are zero. The string output (of floating point numbers) will be padded with zeros: Initial value P A Result String ------------------------------------------------------------ 1234.01 -3 1000 1000 1234 -2 1200 1200 1234.5 -1 1230 1230 1234.001 1 1234 1234.0 1234.01 0 1234 1234 1234.01 2 1234.01 1234.01 1234.01 5 1234.01 1234.01000 For BigInts, no padding occurs. =head2 Accuracy A Number of significant digits. Leading zeros are not counted. A number may have an accuracy greater than the non-zero digits when there are zeros in it or trailing zeros. For example, 123.456 has A of 6, 10203 has 5, 123.0506 has 7, 123.450000 has 8 and 0.000123 has 3. The string output (of floating point numbers) will be padded with zeros: Initial value P A Result String ------------------------------------------------------------ 1234.01 3 1230 1230 1234.01 6 1234.01 1234.01 1234.1 8 1234.1 1234.1000 For BigInts, no padding occurs. =head2 Fallback F When both A and P are undefined, this is used as a fallback accuracy when dividing numbers. =head2 Rounding mode R When rounding a number, different 'styles' or 'kinds' of rounding are possible. (Note that random rounding, as in Math::Round, is not implemented.) =over 2 =item 'trunc' truncation invariably removes all digits following the rounding place, replacing them with zeros. Thus, 987.65 rounded to tens (P=1) becomes 980, and rounded to the fourth sigdig becomes 987.6 (A=4). 123.456 rounded to the second place after the decimal point (P=-2) becomes 123.46. All other implemented styles of rounding attempt to round to the "nearest digit." If the digit D immediately to the right of the rounding place (skipping the decimal point) is greater than 5, the number is incremented at the rounding place (possibly causing a cascade of incrementation): e.g. when rounding to units, 0.9 rounds to 1, and -19.9 rounds to -20. If D < 5, the number is similarly truncated at the rounding place: e.g. when rounding to units, 0.4 rounds to 0, and -19.4 rounds to -19. However the results of other styles of rounding differ if the digit immediately to the right of the rounding place (skipping the decimal point) is 5 and if there are no digits, or no digits other than 0, after that 5. In such cases: =item 'even' rounds the digit at the rounding place to 0, 2, 4, 6, or 8 if it is not already. E.g., when rounding to the first sigdig, 0.45 becomes 0.4, -0.55 becomes -0.6, but 0.4501 becomes 0.5. =item 'odd' rounds the digit at the rounding place to 1, 3, 5, 7, or 9 if it is not already. E.g., when rounding to the first sigdig, 0.45 becomes 0.5, -0.55 becomes -0.5, but 0.5501 becomes 0.6. =item '+inf' round to plus infinity, i.e. always round up. E.g., when rounding to the first sigdig, 0.45 becomes 0.5, -0.55 becomes -0.5, and 0.4501 also becomes 0.5. =item '-inf' round to minus infinity, i.e. always round down. E.g., when rounding to the first sigdig, 0.45 becomes 0.4, -0.55 becomes -0.6, but 0.4501 becomes 0.5. =item 'zero' round to zero, i.e. positive numbers down, negative ones up. E.g., when rounding to the first sigdig, 0.45 becomes 0.4, -0.55 becomes -0.5, but 0.4501 becomes 0.5. =item 'common' round up if the digit immediately to the right of the rounding place is 5 or greater, otherwise round down. E.g., 0.15 becomes 0.2 and 0.149 becomes 0.1. =back The handling of A & P in MBI/MBF (the old core code shipped with Perl versions <= 5.7.2) is like this: =over 2 =item Precision * ffround($p) is able to round to $p number of digits after the decimal point * otherwise P is unused =item Accuracy (significant digits) * fround($a) rounds to $a significant digits * only fdiv() and fsqrt() take A as (optional) parameter + other operations simply create the same number (fneg etc), or more (fmul) of digits + rounding/truncating is only done when explicitly calling one of fround or ffround, and never for BigInt (not implemented) * fsqrt() simply hands its accuracy argument over to fdiv. * the documentation and the comment in the code indicate two different ways on how fdiv() determines the maximum number of digits it should calculate, and the actual code does yet another thing POD: max($Math::BigFloat::div_scale,length(dividend)+length(divisor)) Comment: result has at most max(scale, length(dividend), length(divisor)) digits Actual code: scale = max(scale, length(dividend)-1,length(divisor)-1); scale += length(divisor) - length(dividend); So for lx = 3, ly = 9, scale = 10, scale will actually be 16 (10+9-3). Actually, the 'difference' added to the scale is calculated from the number of "significant digits" in dividend and divisor, which is derived by looking at the length of the mantissa. Which is wrong, since it includes the + sign (oops) and actually gets 2 for '+100' and 4 for '+101'. Oops again. Thus 124/3 with div_scale=1 will get you '41.3' based on the strange assumption that 124 has 3 significant digits, while 120/7 will get you '17', not '17.1' since 120 is thought to have 2 significant digits. The rounding after the division then uses the remainder and $y to determine whether it must round up or down. ? I have no idea which is the right way. That's why I used a slightly more ? simple scheme and tweaked the few failing testcases to match it. =back This is how it works now: =over 2 =item Setting/Accessing * You can set the A global via Math::BigInt->accuracy() or Math::BigFloat->accuracy() or whatever class you are using. * You can also set P globally by using Math::SomeClass->precision() likewise. * Globals are classwide, and not inherited by subclasses. * to undefine A, use Math::SomeCLass->accuracy(undef); * to undefine P, use Math::SomeClass->precision(undef); * Setting Math::SomeClass->accuracy() clears automatically Math::SomeClass->precision(), and vice versa. * To be valid, A must be > 0, P can have any value. * If P is negative, this means round to the P'th place to the right of the decimal point; positive values mean to the left of the decimal point. P of 0 means round to integer. * to find out the current global A, use Math::SomeClass->accuracy() * to find out the current global P, use Math::SomeClass->precision() * use $x->accuracy() respective $x->precision() for the local setting of $x. * Please note that $x->accuracy() respective $x->precision() return eventually defined global A or P, when $x's A or P is not set. =item Creating numbers * When you create a number, you can give the desired A or P via: $x = Math::BigInt->new($number,$A,$P); * Only one of A or P can be defined, otherwise the result is NaN * If no A or P is give ($x = Math::BigInt->new($number) form), then the globals (if set) will be used. Thus changing the global defaults later on will not change the A or P of previously created numbers (i.e., A and P of $x will be what was in effect when $x was created) * If given undef for A and P, NO rounding will occur, and the globals will NOT be used. This is used by subclasses to create numbers without suffering rounding in the parent. Thus a subclass is able to have its own globals enforced upon creation of a number by using $x = Math::BigInt->new($number,undef,undef): use Math::BigInt::SomeSubclass; use Math::BigInt; Math::BigInt->accuracy(2); Math::BigInt::SomeSubClass->accuracy(3); $x = Math::BigInt::SomeSubClass->new(1234); $x is now 1230, and not 1200. A subclass might choose to implement this otherwise, e.g. falling back to the parent's A and P. =item Usage * If A or P are enabled/defined, they are used to round the result of each operation according to the rules below * Negative P is ignored in Math::BigInt, since BigInts never have digits after the decimal point * Math::BigFloat uses Math::BigInt internally, but setting A or P inside Math::BigInt as globals does not tamper with the parts of a BigFloat. A flag is used to mark all Math::BigFloat numbers as 'never round'. =item Precedence * It only makes sense that a number has only one of A or P at a time. If you set either A or P on one object, or globally, the other one will be automatically cleared. * If two objects are involved in an operation, and one of them has A in effect, and the other P, this results in an error (NaN). * A takes precedence over P (Hint: A comes before P). If neither of them is defined, nothing is used, i.e. the result will have as many digits as it can (with an exception for fdiv/fsqrt) and will not be rounded. * There is another setting for fdiv() (and thus for fsqrt()). If neither of A or P is defined, fdiv() will use a fallback (F) of $div_scale digits. If either the dividend's or the divisor's mantissa has more digits than the value of F, the higher value will be used instead of F. This is to limit the digits (A) of the result (just consider what would happen with unlimited A and P in the case of 1/3 :-) * fdiv will calculate (at least) 4 more digits than required (determined by A, P or F), and, if F is not used, round the result (this will still fail in the case of a result like 0.12345000000001 with A or P of 5, but this can not be helped - or can it?) * Thus you can have the math done by on Math::Big* class in two modi: + never round (this is the default): This is done by setting A and P to undef. No math operation will round the result, with fdiv() and fsqrt() as exceptions to guard against overflows. You must explicitly call bround(), bfround() or round() (the latter with parameters). Note: Once you have rounded a number, the settings will 'stick' on it and 'infect' all other numbers engaged in math operations with it, since local settings have the highest precedence. So, to get SaferRound[tm], use a copy() before rounding like this: $x = Math::BigFloat->new(12.34); $y = Math::BigFloat->new(98.76); $z = $x * $y; # 1218.6984 print $x->copy()->fround(3); # 12.3 (but A is now 3!) $z = $x * $y; # still 1218.6984, without # copy would have been 1210! + round after each op: After each single operation (except for testing like is_zero()), the method round() is called and the result is rounded appropriately. By setting proper values for A and P, you can have all-the-same-A or all-the-same-P modes. For example, Math::Currency might set A to undef, and P to -2, globally. ?Maybe an extra option that forbids local A & P settings would be in order, ?so that intermediate rounding does not 'poison' further math? =item Overriding globals * you will be able to give A, P and R as an argument to all the calculation routines; the second parameter is A, the third one is P, and the fourth is R (shift right by one for binary operations like badd). P is used only if the first parameter (A) is undefined. These three parameters override the globals in the order detailed as follows, i.e. the first defined value wins: (local: per object, global: global default, parameter: argument to sub) + parameter A + parameter P + local A (if defined on both of the operands: smaller one is taken) + local P (if defined on both of the operands: bigger one is taken) + global A + global P + global F * fsqrt() will hand its arguments to fdiv(), as it used to, only now for two arguments (A and P) instead of one =item Local settings * You can set A or P locally by using $x->accuracy() or $x->precision() and thus force different A and P for different objects/numbers. * Setting A or P this way immediately rounds $x to the new value. * $x->accuracy() clears $x->precision(), and vice versa. =item Rounding * the rounding routines will use the respective global or local settings. fround()/bround() is for accuracy rounding, while ffround()/bfround() is for precision * the two rounding functions take as the second parameter one of the following rounding modes (R): 'even', 'odd', '+inf', '-inf', 'zero', 'trunc', 'common' * you can set/get the global R by using Math::SomeClass->round_mode() or by setting $Math::SomeClass::round_mode * after each operation, $result->round() is called, and the result may eventually be rounded (that is, if A or P were set either locally, globally or as parameter to the operation) * to manually round a number, call $x->round($A,$P,$round_mode); this will round the number by using the appropriate rounding function and then normalize it. * rounding modifies the local settings of the number: $x = Math::BigFloat->new(123.456); $x->accuracy(5); $x->bround(4); Here 4 takes precedence over 5, so 123.5 is the result and $x->accuracy() will be 4 from now on. =item Default values * R: 'even' * F: 40 * A: undef * P: undef =item Remarks * The defaults are set up so that the new code gives the same results as the old code (except in a few cases on fdiv): + Both A and P are undefined and thus will not be used for rounding after each operation. + round() is thus a no-op, unless given extra parameters A and P =back =head1 Infinity and Not a Number While BigInt has extensive handling of inf and NaN, certain quirks remain. =over 2 =item oct()/hex() These perl routines currently (as of Perl v.5.8.6) cannot handle passed inf. te@linux:~> perl -wle 'print 2 ** 3333' inf te@linux:~> perl -wle 'print 2 ** 3333 == 2 ** 3333' 1 te@linux:~> perl -wle 'print oct(2 ** 3333)' 0 te@linux:~> perl -wle 'print hex(2 ** 3333)' Illegal hexadecimal digit 'i' ignored at -e line 1. 0 The same problems occur if you pass them Math::BigInt->binf() objects. Since overloading these routines is not possible, this cannot be fixed from BigInt. =item ==, !=, <, >, <=, >= with NaNs BigInt's bcmp() routine currently returns undef to signal that a NaN was involved in a comparison. However, the overload code turns that into either 1 or '' and thus operations like C<< NaN != NaN >> might return wrong values. =item log(-inf) C<< log(-inf) >> is highly weird. Since log(-x)=pi*i+log(x), then log(-inf)=pi*i+inf. However, since the imaginary part is finite, the real infinity "overshadows" it, so the number might as well just be infinity. However, the result is a complex number, and since BigInt/BigFloat can only have real numbers as results, the result is NaN. =item exp(), cos(), sin(), atan2() These all might have problems handling infinity right. =back =head1 INTERNALS The actual numbers are stored as unsigned big integers (with separate sign). You should neither care about nor depend on the internal representation; it might change without notice. Use B method calls like C<< $x->sign(); >> instead relying on the internal representation. =head2 MATH LIBRARY Math with the numbers is done (by default) by a module called C. This is equivalent to saying: use Math::BigInt try => 'Calc'; You can change this backend library by using: use Math::BigInt try => 'GMP'; B: General purpose packages should not be explicit about the library to use; let the script author decide which is best. If your script works with huge numbers and Calc is too slow for them, you can also for the loading of one of these libraries and if none of them can be used, the code will die: use Math::BigInt only => 'GMP,Pari'; The following would first try to find Math::BigInt::Foo, then Math::BigInt::Bar, and when this also fails, revert to Math::BigInt::Calc: use Math::BigInt try => 'Foo,Math::BigInt::Bar'; The library that is loaded last will be used. Note that this can be overwritten at any time by loading a different library, and numbers constructed with different libraries cannot be used in math operations together. =head3 What library to use? B: General purpose packages should not be explicit about the library to use; let the script author decide which is best. L and L are in cases involving big numbers much faster than Calc, however it is slower when dealing with very small numbers (less than about 20 digits) and when converting very large numbers to decimal (for instance for printing, rounding, calculating their length in decimal etc). So please select carefully what library you want to use. Different low-level libraries use different formats to store the numbers. However, you should B depend on the number having a specific format internally. See the respective math library module documentation for further details. =head2 SIGN The sign is either '+', '-', 'NaN', '+inf' or '-inf'. A sign of 'NaN' is used to represent the result when input arguments are not numbers or as a result of 0/0. '+inf' and '-inf' represent plus respectively minus infinity. You will get '+inf' when dividing a positive number by 0, and '-inf' when dividing any negative number by 0. =head2 mantissa(), exponent() and parts() C and C return the said parts of the BigInt such that: $m = $x->mantissa(); $e = $x->exponent(); $y = $m * ( 10 ** $e ); print "ok\n" if $x == $y; C<< ($m,$e) = $x->parts() >> is just a shortcut that gives you both of them in one go. Both the returned mantissa and exponent have a sign. Currently, for BigInts C<$e> is always 0, except +inf and -inf, where it is C<+inf>; and for NaN, where it is C; and for C<$x == 0>, where it is C<1> (to be compatible with Math::BigFloat's internal representation of a zero as C<0E1>). C<$m> is currently just a copy of the original number. The relation between C<$e> and C<$m> will stay always the same, though their real values might change. =head1 EXAMPLES use Math::BigInt; sub bint { Math::BigInt->new(shift); } $x = Math::BigInt->bstr("1234") # string "1234" $x = "$x"; # same as bstr() $x = Math::BigInt->bneg("1234"); # BigInt "-1234" $x = Math::BigInt->babs("-12345"); # BigInt "12345" $x = Math::BigInt->bnorm("-0.00"); # BigInt "0" $x = bint(1) + bint(2); # BigInt "3" $x = bint(1) + "2"; # ditto (auto-BigIntify of "2") $x = bint(1); # BigInt "1" $x = $x + 5 / 2; # BigInt "3" $x = $x ** 3; # BigInt "27" $x *= 2; # BigInt "54" $x = Math::BigInt->new(0); # BigInt "0" $x--; # BigInt "-1" $x = Math::BigInt->badd(4,5) # BigInt "9" print $x->bsstr(); # 9e+0 Examples for rounding: use Math::BigFloat; use Test; $x = Math::BigFloat->new(123.4567); $y = Math::BigFloat->new(123.456789); Math::BigFloat->accuracy(4); # no more A than 4 ok ($x->copy()->fround(),123.4); # even rounding print $x->copy()->fround(),"\n"; # 123.4 Math::BigFloat->round_mode('odd'); # round to odd print $x->copy()->fround(),"\n"; # 123.5 Math::BigFloat->accuracy(5); # no more A than 5 Math::BigFloat->round_mode('odd'); # round to odd print $x->copy()->fround(),"\n"; # 123.46 $y = $x->copy()->fround(4),"\n"; # A = 4: 123.4 print "$y, ",$y->accuracy(),"\n"; # 123.4, 4 Math::BigFloat->accuracy(undef); # A not important now Math::BigFloat->precision(2); # P important print $x->copy()->bnorm(),"\n"; # 123.46 print $x->copy()->fround(),"\n"; # 123.46 Examples for converting: my $x = Math::BigInt->new('0b1'.'01' x 123); print "bin: ",$x->as_bin()," hex:",$x->as_hex()," dec: ",$x,"\n"; =head1 Autocreating constants After C all the B decimal, hexadecimal and binary constants in the given scope are converted to C. This conversion happens at compile time. In particular, perl -MMath::BigInt=:constant -e 'print 2**100,"\n"' prints the integer value of C<2**100>. Note that without conversion of constants the expression 2**100 will be calculated as perl scalar. Please note that strings and floating point constants are not affected, so that use Math::BigInt qw/:constant/; $x = 1234567890123456789012345678901234567890 + 123456789123456789; $y = '1234567890123456789012345678901234567890' + '123456789123456789'; do not work. You need an explicit Math::BigInt->new() around one of the operands. You should also quote large constants to protect loss of precision: use Math::BigInt; $x = Math::BigInt->new('1234567889123456789123456789123456789'); Without the quotes Perl would convert the large number to a floating point constant at compile time and then hand the result to BigInt, which results in an truncated result or a NaN. This also applies to integers that look like floating point constants: use Math::BigInt ':constant'; print ref(123e2),"\n"; print ref(123.2e2),"\n"; will print nothing but newlines. Use either L or L to get this to work. =head1 PERFORMANCE Using the form $x += $y; etc over $x = $x + $y is faster, since a copy of $x must be made in the second case. For long numbers, the copy can eat up to 20% of the work (in the case of addition/subtraction, less for multiplication/division). If $y is very small compared to $x, the form $x += $y is MUCH faster than $x = $x + $y since making the copy of $x takes more time then the actual addition. With a technique called copy-on-write, the cost of copying with overload could be minimized or even completely avoided. A test implementation of COW did show performance gains for overloaded math, but introduced a performance loss due to a constant overhead for all other operations. So Math::BigInt does currently not COW. The rewritten version of this module (vs. v0.01) is slower on certain operations, like C, C and C. The reason are that it does now more work and handles much more cases. The time spent in these operations is usually gained in the other math operations so that code on the average should get (much) faster. If they don't, please contact the author. Some operations may be slower for small numbers, but are significantly faster for big numbers. Other operations are now constant (O(1), like C, C etc), instead of O(N) and thus nearly always take much less time. These optimizations were done on purpose. If you find the Calc module to slow, try to install any of the replacement modules and see if they help you. =head2 Alternative math libraries You can use an alternative library to drive Math::BigInt. See the section L for more information. For more benchmark results see L. =head1 SUBCLASSING =head2 Subclassing Math::BigInt The basic design of Math::BigInt allows simple subclasses with very little work, as long as a few simple rules are followed: =over 2 =item * The public API must remain consistent, i.e. if a sub-class is overloading addition, the sub-class must use the same name, in this case badd(). The reason for this is that Math::BigInt is optimized to call the object methods directly. =item * The private object hash keys like C<< $x->{sign} >> may not be changed, but additional keys can be added, like C<< $x->{_custom} >>. =item * Accessor functions are available for all existing object hash keys and should be used instead of directly accessing the internal hash keys. The reason for this is that Math::BigInt itself has a pluggable interface which permits it to support different storage methods. =back More complex sub-classes may have to replicate more of the logic internal of Math::BigInt if they need to change more basic behaviors. A subclass that needs to merely change the output only needs to overload C. All other object methods and overloaded functions can be directly inherited from the parent class. At the very minimum, any subclass will need to provide its own C and can store additional hash keys in the object. There are also some package globals that must be defined, e.g.: # Globals $accuracy = undef; $precision = -2; # round to 2 decimal places $round_mode = 'even'; $div_scale = 40; Additionally, you might want to provide the following two globals to allow auto-upgrading and auto-downgrading to work correctly: $upgrade = undef; $downgrade = undef; This allows Math::BigInt to correctly retrieve package globals from the subclass, like C<$SubClass::precision>. See t/Math/BigInt/Subclass.pm or t/Math/BigFloat/SubClass.pm completely functional subclass examples. Don't forget to use overload; in your subclass to automatically inherit the overloading from the parent. If you like, you can change part of the overloading, look at Math::String for an example. =head1 UPGRADING When used like this: use Math::BigInt upgrade => 'Foo::Bar'; certain operations will 'upgrade' their calculation and thus the result to the class Foo::Bar. Usually this is used in conjunction with Math::BigFloat: use Math::BigInt upgrade => 'Math::BigFloat'; As a shortcut, you can use the module C: use bignum; Also good for one-liners: perl -Mbignum -le 'print 2 ** 255' This makes it possible to mix arguments of different classes (as in 2.5 + 2) as well es preserve accuracy (as in sqrt(3)). Beware: This feature is not fully implemented yet. =head2 Auto-upgrade The following methods upgrade themselves unconditionally; that is if upgrade is in effect, they will always hand up their work: =over 2 =item bsqrt() =item div() =item blog() =item bexp() =back Beware: This list is not complete. All other methods upgrade themselves only when one (or all) of their arguments are of the class mentioned in $upgrade (This might change in later versions to a more sophisticated scheme): =head1 EXPORTS C exports nothing by default, but can export the following methods: bgcd blcm =head1 CAVEATS Some things might not work as you expect them. Below is documented what is known to be troublesome: =over 1 =item bstr(), bsstr() and 'cmp' Both C and C as well as automated stringify via overload now drop the leading '+'. The old code would return '+3', the new returns '3'. This is to be consistent with Perl and to make C (especially with overloading) to work as you expect. It also solves problems with C, because its C uses 'eq' internally. Mark Biggar said, when asked about to drop the '+' altogether, or make only C work: I agree (with the first alternative), don't add the '+' on positive numbers. It's not as important anymore with the new internal form for numbers. It made doing things like abs and neg easier, but those have to be done differently now anyway. So, the following examples will now work all as expected: use Test; BEGIN { plan tests => 1 } use Math::BigInt; my $x = new Math::BigInt 3*3; my $y = new Math::BigInt 3*3; ok ($x,3*3); print "$x eq 9" if $x eq $y; print "$x eq 9" if $x eq '9'; print "$x eq 9" if $x eq 3*3; Additionally, the following still works: print "$x == 9" if $x == $y; print "$x == 9" if $x == 9; print "$x == 9" if $x == 3*3; There is now a C method to get the string in scientific notation aka C<1e+2> instead of C<100>. Be advised that overloaded 'eq' always uses bstr() for comparison, but Perl will represent some numbers as 100 and others as 1e+308. If in doubt, convert both arguments to Math::BigInt before comparing them as strings: use Test; BEGIN { plan tests => 3 } use Math::BigInt; $x = Math::BigInt->new('1e56'); $y = 1e56; ok ($x,$y); # will fail ok ($x->bsstr(),$y); # okay $y = Math::BigInt->new($y); ok ($x,$y); # okay Alternatively, simple use C<< <=> >> for comparisons, this will get it always right. There is not yet a way to get a number automatically represented as a string that matches exactly the way Perl represents it. See also the section about L for problems in comparing NaNs. =item int() C will return (at least for Perl v5.7.1 and up) another BigInt, not a Perl scalar: $x = Math::BigInt->new(123); $y = int($x); # BigInt 123 $x = Math::BigFloat->new(123.45); $y = int($x); # BigInt 123 In all Perl versions you can use C or C for the same effect: $x = Math::BigFloat->new(123.45); $y = $x->as_number(); # BigInt 123 $y = $x->as_int(); # ditto This also works for other subclasses, like Math::String. If you want a real Perl scalar, use C: $y = $x->numify(); # 123 as scalar This is seldom necessary, though, because this is done automatically, like when you access an array: $z = $array[$x]; # does work automatically =item length The following will probably not do what you expect: $c = Math::BigInt->new(123); print $c->length(),"\n"; # prints 30 It prints both the number of digits in the number and in the fraction part since print calls C in list context. Use something like: print scalar $c->length(),"\n"; # prints 3 =item bdiv The following will probably not do what you expect: print $c->bdiv(10000),"\n"; It prints both quotient and remainder since print calls C in list context. Also, C will modify $c, so be careful. You probably want to use print $c / 10000,"\n"; print scalar $c->bdiv(10000),"\n"; # or if you want to modify $c instead. The quotient is always the greatest integer less than or equal to the real-valued quotient of the two operands, and the remainder (when it is non-zero) always has the same sign as the second operand; so, for example, 1 / 4 => ( 0, 1) 1 / -4 => (-1,-3) -3 / 4 => (-1, 1) -3 / -4 => ( 0,-3) -11 / 2 => (-5,1) 11 /-2 => (-5,-1) As a consequence, the behavior of the operator % agrees with the behavior of Perl's built-in % operator (as documented in the perlop manpage), and the equation $x == ($x / $y) * $y + ($x % $y) holds true for any $x and $y, which justifies calling the two return values of bdiv() the quotient and remainder. The only exception to this rule are when $y == 0 and $x is negative, then the remainder will also be negative. See below under "infinity handling" for the reasoning behind this. Perl's 'use integer;' changes the behaviour of % and / for scalars, but will not change BigInt's way to do things. This is because under 'use integer' Perl will do what the underlying C thinks is right and this is different for each system. If you need BigInt's behaving exactly like Perl's 'use integer', bug the author to implement it ;) =item infinity handling Here are some examples that explain the reasons why certain results occur while handling infinity: The following table shows the result of the division and the remainder, so that the equation above holds true. Some "ordinary" cases are strewn in to show more clearly the reasoning: A / B = C, R so that C * B + R = A ========================================================= 5 / 8 = 0, 5 0 * 8 + 5 = 5 0 / 8 = 0, 0 0 * 8 + 0 = 0 0 / inf = 0, 0 0 * inf + 0 = 0 0 /-inf = 0, 0 0 * -inf + 0 = 0 5 / inf = 0, 5 0 * inf + 5 = 5 5 /-inf = 0, 5 0 * -inf + 5 = 5 -5/ inf = 0, -5 0 * inf + -5 = -5 -5/-inf = 0, -5 0 * -inf + -5 = -5 inf/ 5 = inf, 0 inf * 5 + 0 = inf -inf/ 5 = -inf, 0 -inf * 5 + 0 = -inf inf/ -5 = -inf, 0 -inf * -5 + 0 = inf -inf/ -5 = inf, 0 inf * -5 + 0 = -inf 5/ 5 = 1, 0 1 * 5 + 0 = 5 -5/ -5 = 1, 0 1 * -5 + 0 = -5 inf/ inf = 1, 0 1 * inf + 0 = inf -inf/-inf = 1, 0 1 * -inf + 0 = -inf inf/-inf = -1, 0 -1 * -inf + 0 = inf -inf/ inf = -1, 0 1 * -inf + 0 = -inf 8/ 0 = inf, 8 inf * 0 + 8 = 8 inf/ 0 = inf, inf inf * 0 + inf = inf 0/ 0 = NaN These cases below violate the "remainder has the sign of the second of the two arguments", since they wouldn't match up otherwise. A / B = C, R so that C * B + R = A ======================================================== -inf/ 0 = -inf, -inf -inf * 0 + inf = -inf -8/ 0 = -inf, -8 -inf * 0 + 8 = -8 =item Modifying and = Beware of: $x = Math::BigFloat->new(5); $y = $x; It will not do what you think, e.g. making a copy of $x. Instead it just makes a second reference to the B object and stores it in $y. Thus anything that modifies $x (except overloaded operators) will modify $y, and vice versa. Or in other words, C<=> is only safe if you modify your BigInts only via overloaded math. As soon as you use a method call it breaks: $x->bmul(2); print "$x, $y\n"; # prints '10, 10' If you want a true copy of $x, use: $y = $x->copy(); You can also chain the calls like this, this will make first a copy and then multiply it by 2: $y = $x->copy()->bmul(2); See also the documentation for overload.pm regarding C<=>. =item bpow C (and the rounding functions) now modifies the first argument and returns it, unlike the old code which left it alone and only returned the result. This is to be consistent with C etc. The first three will modify $x, the last one won't: print bpow($x,$i),"\n"; # modify $x print $x->bpow($i),"\n"; # ditto print $x **= $i,"\n"; # the same print $x ** $i,"\n"; # leave $x alone The form C<$x **= $y> is faster than C<$x = $x ** $y;>, though. =item Overloading -$x The following: $x = -$x; is slower than $x->bneg(); since overload calls C instead of C. The first variant needs to preserve $x since it does not know that it later will get overwritten. This makes a copy of $x and takes O(N), but $x->bneg() is O(1). =item Mixing different object types In Perl you will get a floating point value if you do one of the following: $float = 5.0 + 2; $float = 2 + 5.0; $float = 5 / 2; With overloaded math, only the first two variants will result in a BigFloat: use Math::BigInt; use Math::BigFloat; $mbf = Math::BigFloat->new(5); $mbi2 = Math::BigInteger->new(5); $mbi = Math::BigInteger->new(2); # what actually gets called: $float = $mbf + $mbi; # $mbf->badd() $float = $mbf / $mbi; # $mbf->bdiv() $integer = $mbi + $mbf; # $mbi->badd() $integer = $mbi2 / $mbi; # $mbi2->bdiv() $integer = $mbi2 / $mbf; # $mbi2->bdiv() This is because math with overloaded operators follows the first (dominating) operand, and the operation of that is called and returns thus the result. So, Math::BigInt::bdiv() will always return a Math::BigInt, regardless whether the result should be a Math::BigFloat or the second operant is one. To get a Math::BigFloat you either need to call the operation manually, make sure the operands are already of the proper type or casted to that type via Math::BigFloat->new(): $float = Math::BigFloat->new($mbi2) / $mbi; # = 2.5 Beware of simple "casting" the entire expression, this would only convert the already computed result: $float = Math::BigFloat->new($mbi2 / $mbi); # = 2.0 thus wrong! Beware also of the order of more complicated expressions like: $integer = ($mbi2 + $mbi) / $mbf; # int / float => int $integer = $mbi2 / Math::BigFloat->new($mbi); # ditto If in doubt, break the expression into simpler terms, or cast all operands to the desired resulting type. Scalar values are a bit different, since: $float = 2 + $mbf; $float = $mbf + 2; will both result in the proper type due to the way the overloaded math works. This section also applies to other overloaded math packages, like Math::String. One solution to you problem might be autoupgrading|upgrading. See the pragmas L, L and L for an easy way to do this. =item bsqrt() C works only good if the result is a big integer, e.g. the square root of 144 is 12, but from 12 the square root is 3, regardless of rounding mode. The reason is that the result is always truncated to an integer. If you want a better approximation of the square root, then use: $x = Math::BigFloat->new(12); Math::BigFloat->precision(0); Math::BigFloat->round_mode('even'); print $x->copy->bsqrt(),"\n"; # 4 Math::BigFloat->precision(2); print $x->bsqrt(),"\n"; # 3.46 print $x->bsqrt(3),"\n"; # 3.464 =item brsft() For negative numbers in base see also L. =back =head1 LICENSE This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself. =head1 SEE ALSO L, L and L as well as L and L. The pragmas L, L and L also might be of interest because they solve the autoupgrading/downgrading issue, at least partly. The package at L contains more documentation including a full version history, testcases, empty subclass files and benchmarks. =head1 AUTHORS Original code by Mark Biggar, overloaded interface by Ilya Zakharevich. Completely rewritten by Tels http://bloodgate.com in late 2000, 2001 - 2006 and still at it in 2007. Many people contributed in one or more ways to the final beast, see the file CREDITS for an (incomplete) list. If you miss your name, please drop me a mail. Thank you! =cut