NAME
Test::Most - Most commonly needed test functions and features.
VERSION
Version 0.38
SYNOPSIS
Instead of this:
use
strict;
use
warnings;
use
Test::Exception 0.88;
use
Test::Differences 0.500;
use
Test::Deep 0.106;
use
Test::Warn 0.11;
You type this:
DESCRIPTION
Test::Most exists to reduce boilerplate and to make your testing life easier. We provide "one stop shopping" for most commonly used testing modules. In fact, we often require the latest versions so that you get bug fixes through Test::Most and don't have to keep upgrading these modules separately.
This module provides you with the most commonly used testing functions, along with automatically turning on strict and warning and gives you a bit more fine-grained control over your test suite.
ok 1,
'Normal calls to ok() should succeed'
;
is 2, 2,
'... as should all passing tests'
;
eq_or_diff [3], [4],
'... but failing tests should die'
;
ok 4,
'... will never get to here'
;
As you can see, the eq_or_diff
test will fail. Because 'die' is in the import list, the test program will halt at that point.
If you do not want strict and warnings enabled, you must explicitly disable them. Thus, you must be explicit about what you want and no longer need to worry about accidentally forgetting them.
EXPORT
All functions from the following modules will automatically be exported into your namespace:
Functions which are optionally exported from any of those modules must be referred to by their fully-qualified name:
Test::Deep::render_stack(
$var
,
$stack
);
FUNCTIONS
Several other functions are also automatically exported:
die_on_fail
die_on_fail;
is_deeply
$foo
, bar,
'... we throw an exception if this fails'
;
This function, if called, will cause the test program to throw a Test::Most::Exception, effectively halting the test.
bail_on_fail
bail_on_fail;
is_deeply
$foo
, bar,
'... we bail out if this fails'
;
This function, if called, will cause the test suite to BAIL_OUT() if any tests fail after it.
restore_fail
die_on_fail;
is_deeply
$foo
, bar,
'... we throw an exception if this fails'
;
restore_fail;
cmp_bag(\
@got
, \
@bag
,
'... we will not throw an exception if this fails'
;
This restores the original test failure behavior, so subsequent tests will no longer throw an exception or BAIL_OUT().
set_failure_handler
If you prefer other behavior to 'die_on_fail' or 'bail_on_fail', you can set your own failure handler:
set_failure_handler(
sub
{
my
$builder
=
shift
;
if
(
$builder
&&
$builder
->{Test_Results}[-1] =~ /critical/ ) {
send_admin_email(
"critical failure in tests"
);
}
} );
It receives the Test::Builder
instance as its only argument.
Important: Note that if the failing test is the very last test run, then the $builder
will likely be undefined. This is an unfortunate side effect of how Test::Builder
has been designed.
explain
Similar to note()
, the output will only be seen by the user by using the -v
switch with prove
or reading the raw TAP.
Unlike note()
, any reference in the argument list is automatically expanded using Data::Dumper
. Thus, instead of this:
You can now just do this:
my
$self
= Some::Object->new(
$id
);
explain
'I was just created: '
,
$self
;
That output will look similar to:
I was just created:
bless
( {
'id'
=> 2,
'stack'
=> []
},
'Some::Object'
)
Note that the "dumpered" output has the Data::Dumper
variables $Indent
, Sortkeys
and Terse
all set to the value of 1
(one). This allows for a much cleaner diagnostic output and at the present time cannot be overridden.
Note that Test::More's explain
acts differently. This explain
is equivalent to note explain
in Test::More.
show
Experimental. Just like explain
, but also tries to show you the lexical variable names:
my
$var
= 3;
my
@array
=
qw/ foo bar /
;
show
$var
, \
@array
;
__END__
$var = 3;
@array = [
'foo',
'bar'
];
It will show $VAR1
, $VAR2
... $VAR_N
for every variable it cannot figure out the variable name to:
my
@array
=
qw/ foo bar /
;
show
@array
;
__END__
$VAR1 = 'foo';
$VAR2 = 'bar';
Note that this relies on Data::Dumper::Names version 0.03 or greater. If this is not present, it will warn and call explain instead. Also, it can only show the names for lexical variables. Globals such as %ENV
or %@
are not accessed via PadWalker and thus cannot be shown. It would be nice to find a workaround for this.
always_explain
and always_show
These are identical to explain
and show
, but like Test::More's diag
function, these will always emit output, regardless of whether or not you're in verbose mode.
all_done
DEPRECATED. Use the new done_testing()
(added in Test::More since 0.87_01). Instead. We're leaving this in here for a long deprecation cycle. After a while, we might even start warning.
If the plan is specified as defer_plan
, you may call &all_done
at the end of the test with an optional test number. This lets you set the plan without knowing the plan before you run the tests.
If you call it without a test number, the tests will still fail if you don't get to the end of the test. This is useful if you don't want to specify a plan but the tests exit unexpectedly. For example, the following would pass with no_plan
but fails with all_done
.
See "Deferred plans" for more information.
EXPORT ON DEMAND
The following will be exported only if requested:
timeit
Prototype: timeit(&;$)
This function will warn if Time::HiRes
is not installed. The test will still be run, but no timing information will be displayed.
timeit { is expensive_function(),
$some_value
,
$message
}
"expensive_function()"
;
timeit { is expensive_function(),
$some_value
,
$message
};
timeit
accepts a code reference and an optional message. After the test is run, will explain
the time of the function using Time::HiRes
. If a message is supplied, it will be formatted as:
sprintf
"$message: took %s seconds"
=>
$time
;
Otherwise, it will be formatted as:
sprintf
"$filename line $line: took %s seconds"
=>
$time
;
DIE OR BAIL ON FAIL
Sometimes you want your test suite to throw an exception or BAIL_OUT() if a test fails. In order to provide maximum flexibility, there are three ways to accomplish each of these.
Import list
If die
or bail
is anywhere in the import list, the test program/suite will throw a Test::Most::Exception
or BAIL_OUT()
as appropriate the first time a test fails. Calling restore_fail
anywhere in the test program will restore the original behavior (not throwing an exception or bailing out).
Functions
ok
$bar
,
'The test suite will continue if this passes'
;
die_on_fail;
is_deeply
$foo
, bar,
'... we throw an exception if this fails'
;
restore_fail;
ok
$baz
,
'The test suite will continue if this passes'
;
The die_on_fail
and bail_on_fail
functions will automatically set the desired behavior at runtime.
Environment variables
DIE_ON_FAIL=1 prove t/
BAIL_ON_FAIL=1 prove t/
If the DIE_ON_FAIL
or BAIL_ON_FAIL
environment variables are true, any tests which use Test::Most
will throw an exception or call BAIL_OUT on test failure.
MISCELLANEOUS
Moose
It used to be that this module would produce a warning when used with Moose:
Prototype mismatch:
sub
main::blessed ($) vs none
This was because Test::Deep exported a blessed()
function by default, but its prototype did not match the Moose version's prototype. We now exclude the Test::Deep version by default. If you need it, you can call the fully-qualified version or request it on the command line:
Note that as of version 0.34
, reftype
is also excluded from Test::Deep
's import list. This was causing issues with people trying to use Scalar::Util
's reftype
function.
Excluding Test Modules
Sometimes you want a exclude a particular test module. For example, Test::Deep, when used with Moose, produces the following warning:
Prototype mismatch:
sub
main::blessed ($) vs none
You can exclude this with by adding the module to the import list with a '-' symbol in front:
See https://rt.cpan.org/Ticket/Display.html?id=54362&results=e73ff63c5bf9ba0f796efdba5773cf3f for more information.
Excluding Test Symbols
Sometimes you don't want to exclude an entire test module, but just a particular symbol that is causing issues You can exclude the symbol(s) in the standard way, by specifying the symbol in the import list with a '!' in front:
Deferred plans
DEPRECATED and will be removed in some future release of this module. Using defer_plan
will carp()
. Use done_testing()
from Test::More instead.
Sometimes it's difficult to know the plan up front, but you can calculate the plan as your tests run. As a result, you want to defer the plan until the end of the test. Typically, the best you can do is this:
But when you do that, Test::Builder
merely asserts that the number of tests you ran is the number of tests. Until now, there was no way of asserting that the number of tests you expected is the number of tests unless you do so before any tests have run. This fixes that problem.
One-stop shopping
We generally require the latest stable versions of various test modules. Why? Because they have bug fixes and new features. You don't want to have to keep remembering them, so periodically we'll release new versions of Test::Most just for bug fixes.
use ok
We do not bundle Test::use::ok, though it's been requested. That's because use_ok
is broken, but Test::use::ok is also subtly broken (and a touch harder to fix). See http://use.perl.org/~Ovid/journal/39859 for more information.
If you want to test if you can use a module, just use it. If it fails, the test will still fail and that's the desired result.
RATIONALE
People want more control over their test suites. Sometimes when you see hundreds of tests failing and whizzing by, you want the test suite to simply halt on the first failure. This module gives you that control.
As for the reasons for the four test modules chosen, I ran code over a local copy of the CPAN to find the most commonly used testing modules. Here's the top twenty as of January 2010 (the numbers are different because we're now counting distributions which use a given module rather than simply the number of times a module is used).
1 Test::More 14111
2 Test 1736
3 Test::Exception 744
4 Test::Simple 331
5 Test::Pod 328
6 Test::Pod::Coverage 274
7 Test::Perl::Critic 248
8 Test::Base 228
9 Test::NoWarnings 155
10 Test::Distribution 142
11 Test::Kwalitee 138
12 Test::Deep 128
13 Test::Warn 127
14 Test::Differences 102
15 Test::Spelling 101
16 Test::MockObject 87
17 Test::Builder::Tester 84
18 Test::WWW::Mechanize::Catalyst 79
19 Test::UseAllModules 63
20 Test::YAML::Meta 61
Test::Most is number 24 on that list, if you're curious. See http://blogs.perl.org/users/ovid/2010/01/most-popular-testing-modules---january-2010.html.
The modules chosen seemed the best fit for what Test::Most
is trying to do. As of 0.02, we've added Test::Warn by request. It's not in the top ten, but it's a great and useful module.
AUTHOR
Curtis Poe, <ovid at cpan.org>
BUGS
Please report any bugs or feature requests to bug-test-extended at rt.cpan.org
, or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Test-Most. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.
SUPPORT
You can find documentation for this module with the perldoc command.
perldoc Test::Most
You can also look for information at:
RT: CPAN's request tracker
AnnoCPAN: Annotated CPAN documentation
CPAN Ratings
Search CPAN
TODO
Deferred plans
Sometimes you don't know the number of tests you will run when you use Test::More
. The plan()
function allows you to delay specifying the plan, but you must still call it before the tests are run. This is an error:
use
Test::More;
my
$tests
= 0;
foreach
my
$test
(
my
$count
= run(
$test
);
# assumes tests are being run
$tests
+=
$count
;
}
plan(
$tests
);
The way around this is typically to use 'no_plan' and when the tests are done, Test::Builder
merely sets the plan to the number of tests run. We'd like for the programmer to specify this number instead of letting Test::Builder
do it. However, Test::Builder
internals are a bit difficult to work with, so we're delaying this feature.
Cleaner skip()
if
(
$some_condition
) {
skip
$message
,
$num_tests
;
}
else
{
# run those tests
}
That would be cleaner and I might add it if enough people want it.
CAVEATS
Because of how Perl handles arguments, and because diagnostics are not really part of the Test Anything Protocol, what actually happens internally is that we note that a test has failed and we throw an exception or bail out as soon as the next test is called (but before it runs). This means that its arguments are automatically evaluated before we can take action:
ok
$foo
,
'Die if this fails'
;
ok factorial(123456),
'... but wait a loooong time before you throw an exception'
;
ACKNOWLEDGEMENTS
Many thanks to perl-qa
for arguing about this so much that I just went ahead and did it :)
Thanks to Aristotle for suggesting a better way to die or bailout.
Thanks to 'swillert' (http://use.perl.org/~swillert/) for suggesting a better implementation of my "dumper explain" idea (http://use.perl.org/~Ovid/journal/37004).
COPYRIGHT & LICENSE
Copyright 2008 Curtis Poe, all rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.