pod2man - Convert POD data to formatted *roff input
pod2man [--center=string] [--date=string] [--errors=style] [--fixed=font] [--fixedbold=font] [--fixeditalic=font] [--fixedbolditalic=font] [--name=name] [--nourls] [--official] [--quotes=quotes] [--release[=version]] [--section=manext] [--stderr] [--utf8] [--verbose] [input [output] ...]
pod2man is a front-end for Pod::Man, using it to generate *roff input from POD source. The resulting *roff code is suitable for display on a terminal using nroff(1), normally via man(1), or printing using troff(1).
input is the file to read for POD source (the POD can be embedded in
code). If input isn't given, it defaults to
. output, if
given, is the file to which to write the formatted output. If output
isn't given, the formatted output is written to
. Several POD
files can be processed in the same pod2man invocation (saving module
load and compile times) by providing multiple pairs of input and
output files on the command line.
--section, --release, --center, --date, and --official can be used to set the headers and footers to use; if not given, Pod::Man will assume various defaults. See below or Pod::Man for details.
pod2man assumes that your *roff formatters have a fixed-width font
. If yours is called something else (like
--fixed to specify it. This generally only matters for troff output
for printing. Similarly, you can set the fonts used for bold, italic, and
bold italic fixed-width output.
Besides the obvious pod conversions, Pod::Man, and therefore pod2man also
takes care of formatting func(), func(n), and simple variable references
like $foo or @bar so you don't have to use code escapes for them; complex
will still need to be escaped, though.
It also translates dashes that aren't used as hyphens into en dashes, makes
long dashes--like this--into proper em dashes, fixes "paired quotes," and
takes care of several other troff-specific tweaks. See Pod::Man for
- -c string, --center=string
Sets the centered page header to string. The default is "User Contributed Perl Documentation", but also see --official below.
- -d string, --date=string
Set the left-hand footer string to this value. By default, the modification date of the input file will be used, or the current date if input comes from
Set the error handling style.
diesays to throw an exception on any POD formatting error.
stderrsays to report errors on standard error, but not to throw an exception.
podsays to include a POD ERRORS section in the resulting documentation summarizing the errors.
noneignores POD errors entirely, as much as possible.
The default is
The fixed-width font to use for verbatim text and code. Defaults to
CW. Some systems may want
CRinstead. Only matters for troff(1) output.
Bold version of the fixed-width font. Defaults to
CB. Only matters for troff(1) output.
Italic version of the fixed-width font (actually, something of a misnomer, since most fixed-width fonts only have an oblique version, not an italic version). Defaults to
CI. Only matters for troff(1) output.
Bold italic (probably actually oblique) version of the fixed-width font. Pod::Man doesn't assume you have this, and defaults to
CB. Some systems (such as Solaris) have this font available as
CX. Only matters for troff(1) output.
- -h, --help
Print out usage information.
- -l, --lax
No longer used. pod2man used to check its input for validity as a manual page, but this should now be done by podchecker(1) instead. Accepted for backward compatibility; this option no longer does anything.
- -n name, --name=name
Set the name of the manual page to name. Without this option, the manual name is set to the uppercased base name of the file being converted unless the manual section is 3, in which case the path is parsed to see if it is a Perl module path. If it is, a path like
.../lib/Pod/Man.pmis converted into a name like
Pod::Man. This option, if given, overrides any automatic determination of the name.
Note that this option is probably not useful when converting multiple POD files at once. The convention for Unix man pages for commands is for the man page title to be in all-uppercase even if the command isn't.
Normally, L<> formatting codes with a URL but anchor text are formatted to show both the anchor text and the URL. In other words:
is formatted as:
- foo <http://example.com/>
This flag, if given, suppresses the URL when anchor text is given, so this example would be formatted as just
foo. This can produce less cluttered output in cases where the URLs are not particularly important.
- -o, --official
Set the default header to indicate that this page is part of the standard Perl release, if --center is not also given.
- -q quotes, --quotes=quotes
Sets the quote marks used to surround C<> text to quotes. If quotes is a single character, it is used as both the left and right quote; if quotes is two characters, the first character is used as the left quote and the second as the right quoted; and if quotes is four characters, the first two are used as the left quote and the second two as the right quote.
quotes may also be set to the special value
none, in which case no quote marks are added around C<> text (but the font is still changed for troff output).
- -r, --release
Set the centered footer. By default, this is the version of Perl you run pod2man under. Note that some system an macro sets assume that the centered footer will be a modification date and will prepend something like "Last modified: "; if this is the case, you may want to set --release to the last modified date and --date to the version number.
- -s, --section
Set the section for the
.THmacro. The standard section numbering convention is to use 1 for user commands, 2 for system calls, 3 for functions, 4 for devices, 5 for file formats, 6 for games, 7 for miscellaneous information, and 8 for administrator commands. There is a lot of variation here, however; some systems (like Solaris) use 4 for file formats, 5 for miscellaneous information, and 7 for devices. Still others use 1m instead of 8, or some mix of both. About the only section numbers that are reliably consistent are 1, 2, and 3.
By default, section 1 will be used unless the file ends in
.pm, in which case section 3 will be selected.
By default, pod2man dies if any errors are detected in the POD input. If --stderr is given and no --errors flag is present, errors are sent to standard error, but pod2man does not abort. This is equivalent to
--errors=stderrand is supported for backward compatibility.
- -u, --utf8
By default, pod2man produces the most conservative possible *roff output to try to ensure that it will work with as many different *roff implementations as possible. Many *roff implementations cannot handle non-ASCII characters, so this means all non-ASCII characters are converted either to a *roff escape sequence that tries to create a properly accented character (at least for troff output) or to
This option says to instead output literal UTF-8 characters. If your *roff implementation can handle it, this is the best output format to use and avoids corruption of documents containing non-ASCII characters. However, be warned that *roff source with literal UTF-8 characters is not supported by many implementations and may even result in segfaults and other bad behavior.
Be aware that, when using this option, the input encoding of your POD source must be properly declared unless it is US-ASCII or Latin-1. POD input without an
=encodingcommand will be assumed to be in Latin-1, and if it's actually in UTF-8, the output will be double-encoded. See perlpod(1) for more information on the
- -v, --verbose
Print out the name of each output file as it is being generated.
As long as all documents processed result in some output, even if that
output includes errata (a
section generated with
), pod2man will exit with status 0. If any of the
documents being processed do not result in an output document, pod2man
will exit with status 1. If there are syntax errors in a POD document
being processed and the error handling style is set to the default of
die, pod2man will abort immediately with exit status 255.
- pod2man program > program.1
- pod2man SomeModule.pm /usr/perl/man/man3/SomeModule.3
- pod2man --section=7 note.pod > note.7
If you would like to print out a lot of man page continuously, you probably want to set the C and D registers to set contiguous page numbering and even/odd paging, at least on some versions of man(7).
- troff -man -rC1 -rD1 perl.1 perldata.1 perlsyn.1 ...
To get index entries on
, turn on the F register, as in:
- troff -man -rF1 perl.1
The indexing merely outputs messages via
for each major page,
section, subsection, item, and any
Pod::Man for more details.
Lots of this documentation is duplicated from Pod::Man.
The man page documenting the an macro set may be man(5) instead of man(7) on your system.
The current version of this script is always available from its web site at http://www.eyrie.org/~eagle/software/podlators/. It is also part of the Perl core distribution as of 5.6.0.
Russ Allbery <firstname.lastname@example.org>, based very heavily on the original pod2man by Larry Wall and Tom Christiansen.
COPYRIGHT AND LICENSE
Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010, 2012, 2013 Russ Allbery <email@example.com>.
This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself.