=over =item open FILEHANDLE,EXPR X X X X =item open FILEHANDLE,MODE,EXPR =item open FILEHANDLE,MODE,EXPR,LIST =item open FILEHANDLE,MODE,REFERENCE =item open FILEHANDLE Opens the file whose filename is given by EXPR, and associates it with FILEHANDLE. Simple examples to open a file for reading: open(my $fh, "<", "input.txt") or die "Can't open < input.txt: $!"; and for writing: open(my $fh, ">", "output.txt") or die "Can't open > output.txt: $!"; (The following is a comprehensive reference to L|/open FILEHANDLE,EXPR>: for a gentler introduction you may consider L.) If FILEHANDLE is an undefined scalar variable (or array or hash element), a new filehandle is autovivified, meaning that the variable is assigned a reference to a newly allocated anonymous filehandle. Otherwise if FILEHANDLE is an expression, its value is the real filehandle. (This is considered a symbolic reference, so C should I be in effect.) If three (or more) arguments are specified, the open mode (including optional encoding) in the second argument are distinct from the filename in the third. If MODE is C<< < >> or nothing, the file is opened for input. If MODE is C<< > >>, the file is opened for output, with existing files first being truncated ("clobbered") and nonexisting files newly created. If MODE is C<<< >> >>>, the file is opened for appending, again being created if necessary. You can put a C<+> in front of the C<< > >> or C<< < >> to indicate that you want both read and write access to the file; thus C<< +< >> is almost always preferred for read/write updates--the C<< +> >> mode would clobber the file first. You can't usually use either read-write mode for updating textfiles, since they have variable-length records. See the B<-i> switch in L for a better approach. The file is created with permissions of C<0666> modified by the process's L|/umask EXPR> value. These various prefixes correspond to the L modes of C, C, C, C, C, and C. In the one- and two-argument forms of the call, the mode and filename should be concatenated (in that order), preferably separated by white space. You can--but shouldn't--omit the mode in these forms when that mode is C<< < >>. It is safe to use the two-argument form of L|/open FILEHANDLE,EXPR> if the filename argument is a known literal. For three or more arguments if MODE is C<|->, the filename is interpreted as a command to which output is to be piped, and if MODE is C<-|>, the filename is interpreted as a command that pipes output to us. In the two-argument (and one-argument) form, one should replace dash (C<->) with the command. See L for more examples of this. (You are not allowed to L|/open FILEHANDLE,EXPR> to a command that pipes both in I out, but see L, L, and L for alternatives.) In the form of pipe opens taking three or more arguments, if LIST is specified (extra arguments after the command name) then LIST becomes arguments to the command invoked if the platform supports it. The meaning of L|/open FILEHANDLE,EXPR> with more than three arguments for non-pipe modes is not yet defined, but experimental "layers" may give extra LIST arguments meaning. In the two-argument (and one-argument) form, opening C<< <- >> or C<-> opens STDIN and opening C<< >- >> opens STDOUT. You may (and usually should) use the three-argument form of open to specify I/O layers (sometimes referred to as "disciplines") to apply to the handle that affect how the input and output are processed (see L and L for more details). For example: open(my $fh, "<:encoding(UTF-8)", $filename) || die "Can't open UTF-8 encoded $filename: $!"; opens the UTF8-encoded file containing Unicode characters; see L. Note that if layers are specified in the three-argument form, then default layers stored in ${^OPEN} (see L; usually set by the L pragma or the switch C<-CioD>) are ignored. Those layers will also be ignored if you specify a colon with no name following it. In that case the default layer for the operating system (:raw on Unix, :crlf on Windows) is used. Open returns nonzero on success, the undefined value otherwise. If the L|/open FILEHANDLE,EXPR> involved a pipe, the return value happens to be the pid of the subprocess. On some systems (in general, DOS- and Windows-based systems) L|/binmode FILEHANDLE, LAYER> is necessary when you're not working with a text file. For the sake of portability it is a good idea always to use it when appropriate, and never to use it when it isn't appropriate. Also, people can set their I/O to be by default UTF8-encoded Unicode, not bytes. When opening a file, it's seldom a good idea to continue if the request failed, so L|/open FILEHANDLE,EXPR> is frequently used with L|/die LIST>. Even if L|/die LIST> won't do what you want (say, in a CGI script, where you want to format a suitable error message (but there are modules that can help with that problem)) always check the return value from opening a file. The filehandle will be closed when its reference count reaches zero. If it is a lexically scoped variable declared with L|/my VARLIST>, that usually means the end of the enclosing scope. However, this automatic close does not check for errors, so it is better to explicitly close filehandles, especially those used for writing: close($handle) || warn "close failed: $!"; An older style is to use a bareword as the filehandle, as open(FH, "<", "input.txt") or die "Can't open < input.txt: $!"; Then you can use C as the filehandle, in C<< close FH >> and C<< >> and so on. Note that it's a global variable, so this form is not recommended in new code. As a shortcut a one-argument call takes the filename from the global scalar variable of the same name as the filehandle: $ARTICLE = 100; open(ARTICLE) or die "Can't find article $ARTICLE: $!\n"; Here C<$ARTICLE> must be a global (package) scalar variable - not one declared with L|/my VARLIST> or L|/state VARLIST>. As a special case the three-argument form with a read/write mode and the third argument being L|/undef EXPR>: open(my $tmp, "+>", undef) or die ... opens a filehandle to a newly created empty anonymous temporary file. (This happens under any mode, which makes C<< +> >> the only useful and sensible mode to use.) You will need to L|/seek FILEHANDLE,POSITION,WHENCE> to do the reading. Perl is built using PerlIO by default. Unless you've changed this (such as building Perl with C), you can open filehandles directly to Perl scalars via: open(my $fh, ">", \$variable) || .. To (re)open C or C as an in-memory file, close it first: close STDOUT; open(STDOUT, ">", \$variable) or die "Can't open STDOUT: $!"; The scalars for in-memory files are treated as octet strings: unless the file is being opened with truncation the scalar may not contain any code points over 0xFF. Opening in-memory files I fail for a variety of reasons. As with any other C, check the return value for success. See L for detailed info on PerlIO. General examples: open(my $log, ">>", "/usr/spool/news/twitlog"); # if the open fails, output is discarded open(my $dbase, "+<", "dbase.mine") # open for update or die "Can't open 'dbase.mine' for update: $!"; open(my $dbase, "+Tmp$$") # $$ is our process id or die "Can't start sort: $!"; # in-memory files open(my $memory, ">", \$var) or die "Can't open memory file: $!"; print $memory "foo!\n"; # output will appear in $var You may also, in the Bourne shell tradition, specify an EXPR beginning with C<< >& >>, in which case the rest of the string is interpreted as the name of a filehandle (or file descriptor, if numeric) to be duped (as in L) and opened. You may use C<&> after C<< > >>, C<<< >> >>>, C<< < >>, C<< +> >>, C<<< +>> >>>, and C<< +< >>. The mode you specify should match the mode of the original filehandle. (Duping a filehandle does not take into account any existing contents of IO buffers.) If you use the three-argument form, then you can pass either a number, the name of a filehandle, or the normal "reference to a glob". Here is a script that saves, redirects, and restores C and C using various methods: #!/usr/bin/perl open(my $oldout, ">&STDOUT") or die "Can't dup STDOUT: $!"; open(OLDERR, ">&", \*STDERR) or die "Can't dup STDERR: $!"; open(STDOUT, '>', "foo.out") or die "Can't redirect STDOUT: $!"; open(STDERR, ">&STDOUT") or die "Can't dup STDOUT: $!"; select STDERR; $| = 1; # make unbuffered select STDOUT; $| = 1; # make unbuffered print STDOUT "stdout 1\n"; # this works for print STDERR "stderr 1\n"; # subprocesses too open(STDOUT, ">&", $oldout) or die "Can't dup \$oldout: $!"; open(STDERR, ">&OLDERR") or die "Can't dup OLDERR: $!"; print STDOUT "stdout 2\n"; print STDERR "stderr 2\n"; If you specify C<< '<&=X' >>, where C is a file descriptor number or a filehandle, then Perl will do an equivalent of C's L of that file descriptor (and not call L); this is more parsimonious of file descriptors. For example: # open for input, reusing the fileno of $fd open(my $fh, "<&=", $fd) or open(my $fh, "<&=$fd") or # open for append, using the fileno of $oldfh open(my $fh, ">>&=", $oldfh) Being parsimonious on filehandles is also useful (besides being parsimonious) for example when something is dependent on file descriptors, like for example locking using L|/flock FILEHANDLE,OPERATION>. If you do just C<< open(my $A, ">>&", $B) >>, the filehandle C<$A> will not have the same file descriptor as C<$B>, and therefore C will not C nor vice versa. But with C<< open(my $A, ">>&=", $B) >>, the filehandles will share the same underlying system file descriptor. Note that under Perls older than 5.8.0, Perl uses the standard C library's' L to implement the C<=> functionality. On many Unix systems, L fails when file descriptors exceed a certain value, typically 255. For Perls 5.8.0 and later, PerlIO is (most often) the default. You can see whether your Perl was built with PerlIO by running C. If it says C<'define'>, you have PerlIO; otherwise you don't. If you open a pipe on the command C<-> (that is, specify either C<|-> or C<-|> with the one- or two-argument forms of L|/open FILEHANDLE,EXPR>), an implicit L|/fork> is done, so L|/open FILEHANDLE,EXPR> returns twice: in the parent process it returns the pid of the child process, and in the child process it returns (a defined) C<0>. Use C or C to determine whether the open was successful. For example, use either my $child_pid = open(my $from_kid, "-|") // die "Can't fork: $!"; or my $child_pid = open(my $to_kid, "|-") // die "Can't fork: $!"; followed by if ($child_pid) { # am the parent: # either write $to_kid or else read $from_kid ... waitpid $child_pid, 0; } else { # am the child; use STDIN/STDOUT normally ... exit; } The filehandle behaves normally for the parent, but I/O to that filehandle is piped from/to the STDOUT/STDIN of the child process. In the child process, the filehandle isn't opened--I/O happens from/to the new STDOUT/STDIN. Typically this is used like the normal piped open when you want to exercise more control over just how the pipe command gets executed, such as when running setuid and you don't want to have to scan shell commands for metacharacters. The following blocks are more or less equivalent: open(my $fh, "|tr '[a-z]' '[A-Z]'"); open(my $fh, "|-", "tr '[a-z]' '[A-Z]'"); open(my $fh, "|-") || exec 'tr', '[a-z]', '[A-Z]'; open(my $fh, "|-", "tr", '[a-z]', '[A-Z]'); open(my $fh, "cat -n '$file'|"); open(my $fh, "-|", "cat -n '$file'"); open(my $fh, "-|") || exec "cat", "-n", $file; open(my $fh, "-|", "cat", "-n", $file); The last two examples in each block show the pipe as "list form", which is not yet supported on all platforms. A good rule of thumb is that if your platform has a real L|/fork> (in other words, if your platform is Unix, including Linux and MacOS X), you can use the list form. You would want to use the list form of the pipe so you can pass literal arguments to the command without risk of the shell interpreting any shell metacharacters in them. However, this also bars you from opening pipes to commands that intentionally contain shell metacharacters, such as: open(my $fh, "|cat -n | expand -4 | lpr") || die "Can't open pipeline to lpr: $!"; See L for more examples of this. Perl will attempt to flush all files opened for output before any operation that may do a fork, but this may not be supported on some platforms (see L). To be safe, you may need to set L>|perlvar/$E> (C<$AUTOFLUSH> in L) or call the C method of L|IO::Handle/METHODS> on any open handles. On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptor as determined by the value of L|perlvar/$^F>. See L. Closing any piped filehandle causes the parent process to wait for the child to finish, then returns the status value in L|perlvar/$?> and L|perlvar/${^CHILD_ERROR_NATIVE}>. The filename passed to the one- and two-argument forms of L|/open FILEHANDLE,EXPR> will have leading and trailing whitespace deleted and normal redirection characters honored. This property, known as "magic open", can often be used to good effect. A user could specify a filename of F<"rsh cat file |">, or you could change certain filenames as needed: $filename =~ s/(.*\.gz)\s*$/gzip -dc < $1|/; open(my $fh, $filename) or die "Can't open $filename: $!"; Use the three-argument form to open a file with arbitrary weird characters in it, open(my $fh, "<", $file) || die "Can't open $file: $!"; otherwise it's necessary to protect any leading and trailing whitespace: $file =~ s#^(\s)#./$1#; open(my $fh, "< $file\0") || die "Can't open $file: $!"; (this may not work on some bizarre filesystems). One should conscientiously choose between the I and I form of L|/open FILEHANDLE,EXPR>: open(my $in, $ARGV[0]) || die "Can't open $ARGV[0]: $!"; will allow the user to specify an argument of the form C<"rsh cat file |">, but will not work on a filename that happens to have a trailing space, while open(my $in, "<", $ARGV[0]) || die "Can't open $ARGV[0]: $!"; will have exactly the opposite restrictions. (However, some shells support the syntax C<< perl your_program.pl <( rsh cat file ) >>, which produces a filename that can be opened normally.) If you want a "real" C L, then you should use the L|/sysopen FILEHANDLE,FILENAME,MODE> function, which involves no such magic (but uses different filemodes than Perl L|/open FILEHANDLE,EXPR>, which corresponds to C L). This is another way to protect your filenames from interpretation. For example: use IO::Handle; sysopen(my $fh, $path, O_RDWR|O_CREAT|O_EXCL) or die "Can't open $path: $!"; $fh->autoflush(1); print $fh "stuff $$\n"; seek($fh, 0, 0); print "File contains: ", readline($fh); See L|/seek FILEHANDLE,POSITION,WHENCE> for some details about mixing reading and writing. Portability issues: L. =back