# -*- Mode: cperl; coding: utf-8; cperl-indent-level: 4 -*- # vim: ts=4 sts=4 sw=4: use strict; package CPAN; $CPAN::VERSION = '2.38'; $CPAN::VERSION =~ s/_//; # we need to run chdir all over and we would get at wrong libraries # there use File::Spec (); BEGIN { if (File::Spec->can("rel2abs")) { for my $inc (@INC) { $inc = File::Spec->rel2abs($inc) unless ref $inc; } } $SIG{WINCH} = 'IGNORE' if exists $SIG{WINCH}; } use CPAN::Author; use CPAN::HandleConfig; use CPAN::Version; use CPAN::Bundle; use CPAN::CacheMgr; use CPAN::Complete; use CPAN::Debug; use CPAN::Distribution; use CPAN::Distrostatus; use CPAN::FTP; use CPAN::Index 1.93; # https://rt.cpan.org/Ticket/Display.html?id=43349 use CPAN::InfoObj; use CPAN::Module; use CPAN::Prompt; use CPAN::URL; use CPAN::Queue; use CPAN::Tarzip; use CPAN::DeferredCode; use CPAN::Shell; use CPAN::LWP::UserAgent; use CPAN::Exception::RecursiveDependency; use CPAN::Exception::yaml_not_installed; use CPAN::Exception::yaml_process_error; use Carp (); use Config (); use Cwd qw(chdir); use DirHandle (); use Exporter (); use ExtUtils::MakeMaker qw(prompt); # for some unknown reason, # 5.005_04 does not work without # this use File::Basename (); use File::Copy (); use File::Find; use File::Path (); use FileHandle (); use Fcntl qw(:flock); use Safe (); use Sys::Hostname qw(hostname); use Text::ParseWords (); use Text::Wrap (); # protect against "called too early" sub find_perl (); sub anycwd (); sub _uniq; no lib "."; require Mac::BuildTools if $^O eq 'MacOS'; if ($ENV{PERL5_CPAN_IS_RUNNING} && $$ != $ENV{PERL5_CPAN_IS_RUNNING}) { $ENV{PERL5_CPAN_IS_RUNNING_IN_RECURSION} ||= $ENV{PERL5_CPAN_IS_RUNNING}; my @rec = _uniq split(/,/, $ENV{PERL5_CPAN_IS_RUNNING_IN_RECURSION}), $$; $ENV{PERL5_CPAN_IS_RUNNING_IN_RECURSION} = join ",", @rec; # warn "# Note: Recursive call of CPAN.pm detected\n"; my $w = sprintf "# Note: CPAN.pm is running in process %d now", pop @rec; my %sleep = ( 5 => 30, 6 => 60, 7 => 120, ); my $sleep = @rec > 7 ? 300 : ($sleep{scalar @rec}||0); my $verbose = @rec >= 4; while (@rec) { $w .= sprintf " which has been called by process %d", pop @rec; } if ($sleep) { $w .= ".\n\n# Sleeping $sleep seconds to protect other processes\n"; } if ($verbose) { warn $w; } local $| = 1; my $have_been_sleeping = 0; while ($sleep > 0) { printf "\r#%5d", --$sleep; sleep 1; ++$have_been_sleeping; } print "\n" if $have_been_sleeping; } $ENV{PERL5_CPAN_IS_RUNNING}=$$; $ENV{PERL5_CPANPLUS_IS_RUNNING}=$$; # https://rt.cpan.org/Ticket/Display.html?id=23735 END { $CPAN::End++; &cleanup; } $CPAN::Signal ||= 0; $CPAN::Frontend ||= "CPAN::Shell"; unless (@CPAN::Defaultsites) { @CPAN::Defaultsites = map { CPAN::URL->new(TEXT => $_, FROM => "DEF") } "http://www.perl.org/CPAN/", "ftp://ftp.perl.org/pub/CPAN/"; } # $CPAN::iCwd (i for initial) $CPAN::iCwd ||= CPAN::anycwd(); $CPAN::Perl ||= CPAN::find_perl(); $CPAN::Defaultdocs ||= "http://search.cpan.org/perldoc?"; $CPAN::Defaultrecent ||= "http://search.cpan.org/uploads.rdf"; $CPAN::Defaultrecent ||= "http://cpan.uwinnipeg.ca/htdocs/cpan.xml"; # our globals are getting a mess use vars qw( $AUTOLOAD $Be_Silent $CONFIG_DIRTY $Defaultdocs $Echo_readline $Frontend $GOTOSHELL $HAS_USABLE $Have_warned $MAX_RECURSION $META $RUN_DEGRADED $Signal $SQLite $Suppress_readline $VERSION $autoload_recursion $term @Defaultsites @EXPORT ); $MAX_RECURSION = 32; @CPAN::ISA = qw(CPAN::Debug Exporter); # note that these functions live in CPAN::Shell and get executed via # AUTOLOAD when called directly @EXPORT = qw( autobundle bundle clean cvs_import expand force fforce get install install_tested is_tested make mkmyconfig notest perldoc readme recent recompile report shell smoke test upgrade ); sub soft_chdir_with_alternatives ($); { $autoload_recursion ||= 0; #-> sub CPAN::AUTOLOAD ; sub AUTOLOAD { ## no critic $autoload_recursion++; my($l) = $AUTOLOAD; $l =~ s/.*:://; if ($CPAN::Signal) { warn "Refusing to autoload '$l' while signal pending"; $autoload_recursion--; return; } if ($autoload_recursion > 1) { my $fullcommand = join " ", map { "'$_'" } $l, @_; warn "Refusing to autoload $fullcommand in recursion\n"; $autoload_recursion--; return; } my(%export); @export{@EXPORT} = ''; CPAN::HandleConfig->load unless $CPAN::Config_loaded++; if (exists $export{$l}) { CPAN::Shell->$l(@_); } else { die(qq{Unknown CPAN command "$AUTOLOAD". }. qq{Type ? for help.\n}); } $autoload_recursion--; } } { my $x = *SAVEOUT; # avoid warning open($x,">&STDOUT") or die "dup failed"; my $redir = 0; sub _redirect(@) { #die if $redir; local $_; push(@_,undef); while(defined($_=shift)) { if (s/^\s*>//){ my ($m) = s/^>// ? ">" : ""; s/\s+//; $_=shift unless length; die "no dest" unless defined; open(STDOUT,">$m$_") or die "open:$_:$!\n"; $redir=1; } elsif ( s/^\s*\|\s*// ) { my $pipe="| $_"; while(defined($_[0])){ $pipe .= ' ' . shift; } open(STDOUT,$pipe) or die "open:$pipe:$!\n"; $redir=1; } else { push(@_,$_); } } return @_; } sub _unredirect { return unless $redir; $redir = 0; ## redirect: unredirect and propagate errors. explicit close to wait for pipe. close(STDOUT); open(STDOUT,">&SAVEOUT"); die "$@" if "$@"; ## redirect: done } } sub _uniq { my(@list) = @_; my %seen; return grep { !$seen{$_}++ } @list; } #-> sub CPAN::shell ; sub shell { my($self) = @_; $Suppress_readline = ! -t STDIN unless defined $Suppress_readline; CPAN::HandleConfig->load unless $CPAN::Config_loaded++; my $oprompt = shift || CPAN::Prompt->new; my $prompt = $oprompt; my $commandline = shift || ""; $CPAN::CurrentCommandId ||= 1; local($^W) = 1; unless ($Suppress_readline) { require Term::ReadLine; if (! $term or $term->ReadLine eq "Term::ReadLine::Stub" ) { $term = Term::ReadLine->new('CPAN Monitor'); } if ($term->ReadLine eq "Term::ReadLine::Gnu") { my $attribs = $term->Attribs; $attribs->{attempted_completion_function} = sub { &CPAN::Complete::gnu_cpl; } } else { $readline::rl_completion_function = $readline::rl_completion_function = 'CPAN::Complete::cpl'; } if (my $histfile = $CPAN::Config->{'histfile'}) {{ unless ($term->can("AddHistory")) { $CPAN::Frontend->mywarn("Terminal does not support AddHistory.\n"); unless ($CPAN::META->has_inst('Term::ReadLine::Perl')) { $CPAN::Frontend->mywarn("\nTo fix that, maybe try> install Term::ReadLine::Perl\n\n"); } last; } $META->readhist($term,$histfile); }} for ($CPAN::Config->{term_ornaments}) { # alias local $Term::ReadLine::termcap_nowarn = 1; $term->ornaments($_) if defined; } # $term->OUT is autoflushed anyway my $odef = select STDERR; $| = 1; select STDOUT; $| = 1; select $odef; } $META->checklock(); my @cwd = grep { defined $_ and length $_ } CPAN::anycwd(), File::Spec->can("tmpdir") ? File::Spec->tmpdir() : (), File::Spec->rootdir(); my $try_detect_readline; $try_detect_readline = $term->ReadLine eq "Term::ReadLine::Stub" if $term; unless ($CPAN::Config->{inhibit_startup_message}) { my $rl_avail = $Suppress_readline ? "suppressed" : ($term->ReadLine ne "Term::ReadLine::Stub") ? "enabled" : "available (maybe install Bundle::CPAN or Bundle::CPANxxl?)"; $CPAN::Frontend->myprint( sprintf qq{ cpan shell -- CPAN exploration and modules installation (v%s) Enter 'h' for help. }, $CPAN::VERSION, ) } my($continuation) = ""; my $last_term_ornaments; SHELLCOMMAND: while () { if ($Suppress_readline) { if ($Echo_readline) { $|=1; } print $prompt; last SHELLCOMMAND unless defined ($_ = <> ); if ($Echo_readline) { # backdoor: I could not find a way to record sessions print $_; } chomp; } else { last SHELLCOMMAND unless defined ($_ = $term->readline($prompt, $commandline)); } $_ = "$continuation$_" if $continuation; s/^\s+//; next SHELLCOMMAND if /^$/; s/^\s*\?\s*/help /; if (/^(?:q(?:uit)?|bye|exit)\s*$/i) { last SHELLCOMMAND; } elsif (s/\\$//s) { chomp; $continuation = $_; $prompt = " > "; } elsif (/^\!/) { s/^\!//; my($eval) = $_; package CPAN::Eval; # hide from the indexer use strict; use vars qw($import_done); CPAN->import(':DEFAULT') unless $import_done++; CPAN->debug("eval[$eval]") if $CPAN::DEBUG; eval($eval); warn $@ if $@; $continuation = ""; $prompt = $oprompt; } elsif (/./) { my(@line); eval { @line = Text::ParseWords::shellwords($_) }; warn($@), next SHELLCOMMAND if $@; warn("Text::Parsewords could not parse the line [$_]"), next SHELLCOMMAND unless @line; $CPAN::META->debug("line[".join("|",@line)."]") if $CPAN::DEBUG; my $command = shift @line; eval { local (*STDOUT)=*STDOUT; @line = _redirect(@line); CPAN::Shell->$command(@line) }; my $command_error = $@; _unredirect; my $reported_error; if ($command_error) { my $err = $command_error; if (ref $err and $err->isa('CPAN::Exception::blocked_urllist')) { $CPAN::Frontend->mywarn("Client not fully configured, please proceed with configuring.$err"); $reported_error = ref $err; } else { # I'd prefer never to arrive here and make all errors exception objects if ($err =~ /\S/) { require Carp; require Dumpvalue; my $dv = Dumpvalue->new(tick => '"'); Carp::cluck(sprintf "Catching error: %s", $dv->stringify($err)); } } } if ($command =~ /^( # classic commands make |test |install |clean # pragmas for classic commands |ff?orce |notest # compounds |report |smoke |upgrade )$/x) { # only commands that tell us something about failed distros # eval necessary for people without an urllist eval {CPAN::Shell->failed($CPAN::CurrentCommandId,1);}; if (my $err = $@) { unless (ref $err and $reported_error eq ref $err) { die $@; } } } soft_chdir_with_alternatives(\@cwd); $CPAN::Frontend->myprint("\n"); $continuation = ""; $CPAN::CurrentCommandId++; $prompt = $oprompt; } } continue { $commandline = ""; # I do want to be able to pass a default to # shell, but on the second command I see no # use in that $Signal=0; CPAN::Queue->nullify_queue; if ($try_detect_readline) { if ($CPAN::META->has_inst("Term::ReadLine::Gnu") || $CPAN::META->has_inst("Term::ReadLine::Perl") ) { delete $INC{"Term/ReadLine.pm"}; my $redef = 0; local($SIG{__WARN__}) = CPAN::Shell::paintdots_onreload(\$redef); require Term::ReadLine; $CPAN::Frontend->myprint("\n$redef subroutines in ". "Term::ReadLine redefined\n"); $GOTOSHELL = 1; } } if ($term and $term->can("ornaments")) { for ($CPAN::Config->{term_ornaments}) { # alias if (defined $_) { if (not defined $last_term_ornaments or $_ != $last_term_ornaments ) { local $Term::ReadLine::termcap_nowarn = 1; $term->ornaments($_); $last_term_ornaments = $_; } } else { undef $last_term_ornaments; } } } for my $class (qw(Module Distribution)) { # again unsafe meta access? for my $dm (sort keys %{$CPAN::META->{readwrite}{"CPAN::$class"}}) { next unless $CPAN::META->{readwrite}{"CPAN::$class"}{$dm}{incommandcolor}; CPAN->debug("BUG: $class '$dm' was in command state, resetting"); delete $CPAN::META->{readwrite}{"CPAN::$class"}{$dm}{incommandcolor}; } } if ($GOTOSHELL) { $GOTOSHELL = 0; # not too often $META->savehist if $CPAN::term && $CPAN::term->can("GetHistory"); @_ = ($oprompt,""); goto &shell; } } soft_chdir_with_alternatives(\@cwd); } #-> CPAN::soft_chdir_with_alternatives ; sub soft_chdir_with_alternatives ($) { my($cwd) = @_; unless (@$cwd) { my $root = File::Spec->rootdir(); $CPAN::Frontend->mywarn(qq{Warning: no good directory to chdir to! Trying '$root' as temporary haven. }); push @$cwd, $root; } while () { if (chdir "$cwd->[0]") { return; } else { if (@$cwd>1) { $CPAN::Frontend->mywarn(qq{Could not chdir to "$cwd->[0]": $! Trying to chdir to "$cwd->[1]" instead. }); shift @$cwd; } else { $CPAN::Frontend->mydie(qq{Could not chdir to "$cwd->[0]": $!}); } } } } sub _flock { my($fh,$mode) = @_; if ( $Config::Config{d_flock} || $Config::Config{d_fcntl_can_lock} ) { return flock $fh, $mode; } elsif (!$Have_warned->{"d_flock"}++) { $CPAN::Frontend->mywarn("Your OS does not seem to support locking; continuing and ignoring all locking issues\n"); $CPAN::Frontend->mysleep(5); return 1; } else { return 1; } } sub _yaml_module () { my $yaml_module = $CPAN::Config->{yaml_module} || "YAML"; if ( $yaml_module ne "YAML" && !$CPAN::META->has_inst($yaml_module) ) { # $CPAN::Frontend->mywarn("'$yaml_module' not installed, falling back to 'YAML'\n"); $yaml_module = "YAML"; } if ($yaml_module eq "YAML" && $CPAN::META->has_inst($yaml_module) && $YAML::VERSION < 0.60 && !$Have_warned->{"YAML"}++ ) { $CPAN::Frontend->mywarn("Warning: YAML version '$YAML::VERSION' is too low, please upgrade!\n". "I'll continue but problems are *very* likely to happen.\n" ); $CPAN::Frontend->mysleep(5); } return $yaml_module; } # CPAN::_yaml_loadfile sub _yaml_loadfile { my($self,$local_file,$opt) = @_; return +[] unless -s $local_file; my $opt_loadblessed = $opt->{loadblessed} || $CPAN::Config->{yaml_load_code} || 0; my $yaml_module = _yaml_module; if ($CPAN::META->has_inst($yaml_module)) { # temporarily enable yaml code deserialisation no strict 'refs'; # 5.6.2 could not do the local() with the reference # so we do it manually instead my $old_loadcode = ${"$yaml_module\::LoadCode"}; my $old_loadblessed = ${"$yaml_module\::LoadBlessed"}; ${ "$yaml_module\::LoadCode" } = $CPAN::Config->{yaml_load_code} || 0; ${ "$yaml_module\::LoadBlessed" } = $opt_loadblessed ? 1 : 0; my ($code, @yaml); if ($code = UNIVERSAL::can($yaml_module, "LoadFile")) { eval { @yaml = $code->($local_file); }; if ($@) { # this shall not be done by the frontend die CPAN::Exception::yaml_process_error->new($yaml_module,$local_file,"parse",$@); } } elsif ($code = UNIVERSAL::can($yaml_module, "Load")) { local *FH; if (open FH, $local_file) { local $/; my $ystream = ; eval { @yaml = $code->($ystream); }; if ($@) { # this shall not be done by the frontend die CPAN::Exception::yaml_process_error->new($yaml_module,$local_file,"parse",$@); } } else { $CPAN::Frontend->mywarn("Could not open '$local_file': $!"); } } ${"$yaml_module\::LoadCode"} = $old_loadcode; ${"$yaml_module\::LoadBlessed"} = $old_loadblessed; return \@yaml; } else { # this shall not be done by the frontend die CPAN::Exception::yaml_not_installed->new($yaml_module, $local_file, "parse"); } return +[]; } # CPAN::_yaml_dumpfile sub _yaml_dumpfile { my($self,$local_file,@what) = @_; my $yaml_module = _yaml_module; if ($CPAN::META->has_inst($yaml_module)) { my $code; if (UNIVERSAL::isa($local_file, "FileHandle")) { $code = UNIVERSAL::can($yaml_module, "Dump"); eval { print $local_file $code->(@what) }; } elsif ($code = UNIVERSAL::can($yaml_module, "DumpFile")) { eval { $code->($local_file,@what); }; } elsif ($code = UNIVERSAL::can($yaml_module, "Dump")) { local *FH; open FH, ">$local_file" or die "Could not open '$local_file': $!"; print FH $code->(@what); } if ($@) { die CPAN::Exception::yaml_process_error->new($yaml_module,$local_file,"dump",$@); } } else { if (UNIVERSAL::isa($local_file, "FileHandle")) { # I think this case does not justify a warning at all } else { die CPAN::Exception::yaml_not_installed->new($yaml_module, $local_file, "dump"); } } } sub _init_sqlite () { unless ($CPAN::META->has_inst("CPAN::SQLite")) { $CPAN::Frontend->mywarn(qq{CPAN::SQLite not installed, trying to work without\n}) unless $Have_warned->{"CPAN::SQLite"}++; return; } require CPAN::SQLite::META; # not needed since CVS version of 2006-12-17 $CPAN::SQLite ||= CPAN::SQLite::META->new($CPAN::META); } { my $negative_cache = {}; sub _sqlite_running { if ($negative_cache->{time} && time < $negative_cache->{time} + 60) { # need to cache the result, otherwise too slow return $negative_cache->{fact}; } else { $negative_cache = {}; # reset } my $ret = $CPAN::Config->{use_sqlite} && ($CPAN::SQLite || _init_sqlite()); return $ret if $ret; # fast anyway $negative_cache->{time} = time; return $negative_cache->{fact} = $ret; } } $META ||= CPAN->new; # In case we re-eval ourselves we need the || # from here on only subs. ################################################################################ sub _perl_fingerprint { my($self,$other_fingerprint) = @_; my $dll = eval {OS2::DLLname()}; my $mtime_dll = 0; if (defined $dll) { $mtime_dll = (-f $dll ? (stat(_))[9] : '-1'); } my $mtime_perl = (-f CPAN::find_perl ? (stat(_))[9] : '-1'); my $this_fingerprint = { '$^X' => CPAN::find_perl, sitearchexp => $Config::Config{sitearchexp}, 'mtime_$^X' => $mtime_perl, 'mtime_dll' => $mtime_dll, }; if ($other_fingerprint) { if (exists $other_fingerprint->{'stat($^X)'}) { # repair fp from rev. 1.88_57 $other_fingerprint->{'mtime_$^X'} = $other_fingerprint->{'stat($^X)'}[9]; } # mandatory keys since 1.88_57 for my $key (qw($^X sitearchexp mtime_dll mtime_$^X)) { return unless $other_fingerprint->{$key} eq $this_fingerprint->{$key}; } return 1; } else { return $this_fingerprint; } } sub suggest_myconfig () { SUGGEST_MYCONFIG: if(!$INC{'CPAN/MyConfig.pm'}) { $CPAN::Frontend->myprint("You don't seem to have a user ". "configuration (MyConfig.pm) yet.\n"); my $new = CPAN::Shell::colorable_makemaker_prompt("Do you want to create a ". "user configuration now? (Y/n)", "yes"); if($new =~ m{^y}i) { CPAN::Shell->mkmyconfig(); return &checklock; } else { $CPAN::Frontend->mydie("OK, giving up."); } } } #-> sub CPAN::all_objects ; sub all_objects { my($mgr,$class) = @_; CPAN::HandleConfig->load unless $CPAN::Config_loaded++; CPAN->debug("mgr[$mgr] class[$class]") if $CPAN::DEBUG; CPAN::Index->reload; values %{ $META->{readwrite}{$class} }; # unsafe meta access, ok } # Called by shell, not in batch mode. In batch mode I see no risk in # having many processes updating something as installations are # continually checked at runtime. In shell mode I suspect it is # unintentional to open more than one shell at a time #-> sub CPAN::checklock ; sub checklock { my($self) = @_; my $lockfile = File::Spec->catfile($CPAN::Config->{cpan_home},".lock"); if (-f $lockfile && -M _ > 0) { my $fh = FileHandle->new($lockfile) or $CPAN::Frontend->mydie("Could not open lockfile '$lockfile': $!"); my $otherpid = <$fh>; my $otherhost = <$fh>; $fh->close; if (defined $otherpid && length $otherpid) { chomp $otherpid; } if (defined $otherhost && length $otherhost) { chomp $otherhost; } my $thishost = hostname(); my $ask_if_degraded_wanted = 0; if (defined $otherhost && defined $thishost && $otherhost ne '' && $thishost ne '' && $otherhost ne $thishost) { $CPAN::Frontend->mydie(sprintf("CPAN.pm panic: Lockfile '$lockfile'\n". "reports other host $otherhost and other ". "process $otherpid.\n". "Cannot proceed.\n")); } elsif ($RUN_DEGRADED) { $CPAN::Frontend->mywarn("Running in downgraded mode (experimental)\n"); } elsif (defined $otherpid && $otherpid) { return if $$ == $otherpid; # should never happen $CPAN::Frontend->mywarn( qq{ There seems to be running another CPAN process (pid $otherpid). Contacting... }); if (kill 0, $otherpid or $!{EPERM}) { $CPAN::Frontend->mywarn(qq{Other job is running.\n}); $ask_if_degraded_wanted = 1; } elsif (-w $lockfile) { my($ans) = CPAN::Shell::colorable_makemaker_prompt (qq{Other job not responding. Shall I overwrite }. qq{the lockfile '$lockfile'? (Y/n)},"y"); $CPAN::Frontend->myexit("Ok, bye\n") unless $ans =~ /^y/i; } else { Carp::croak( qq{Lockfile '$lockfile' not writable by you. }. qq{Cannot proceed.\n}. qq{ On UNIX try:\n}. qq{ rm '$lockfile'\n}. qq{ and then rerun us.\n} ); } } elsif ($^O eq "MSWin32") { $CPAN::Frontend->mywarn( qq{ There seems to be running another CPAN process according to '$lockfile'. }); $ask_if_degraded_wanted = 1; } else { $CPAN::Frontend->mydie(sprintf("CPAN.pm panic: Found invalid lockfile ". "'$lockfile', please remove. Cannot proceed.\n")); } if ($ask_if_degraded_wanted) { my($ans) = CPAN::Shell::colorable_makemaker_prompt (qq{Shall I try to run in downgraded }. qq{mode? (Y/n)},"y"); if ($ans =~ /^y/i) { $CPAN::Frontend->mywarn("Running in downgraded mode (experimental). Please report if something unexpected happens\n"); $RUN_DEGRADED = 1; for ($CPAN::Config) { # XXX # $_->{build_dir_reuse} = 0; # 2006-11-17 akoenig Why was that? $_->{commandnumber_in_prompt} = 0; # visibility $_->{histfile} = ""; # who should win otherwise? $_->{cache_metadata} = 0; # better would be a lock? $_->{use_sqlite} = 0; # better would be a write lock! $_->{auto_commit} = 0; # we are violent, do not persist $_->{test_report} = 0; # Oliver Paukstadt had sent wrong reports in degraded mode } } else { my $msg = "You may want to kill the other job and delete the lockfile."; if (defined $otherpid) { $msg .= " Something like: kill $otherpid rm $lockfile "; } $CPAN::Frontend->mydie("\n$msg"); } } } my $dotcpan = $CPAN::Config->{cpan_home}; eval { File::Path::mkpath($dotcpan);}; if ($@) { # A special case at least for Jarkko. my $firsterror = $@; my $seconderror; my $symlinkcpan; if (-l $dotcpan) { $symlinkcpan = readlink $dotcpan; die "readlink $dotcpan failed: $!" unless defined $symlinkcpan; eval { File::Path::mkpath($symlinkcpan); }; if ($@) { $seconderror = $@; } else { $CPAN::Frontend->mywarn(qq{ Working directory $symlinkcpan created. }); } } unless (-d $dotcpan) { my $mess = qq{ Your configuration suggests "$dotcpan" as your CPAN.pm working directory. I could not create this directory due to this error: $firsterror\n}; $mess .= qq{ As "$dotcpan" is a symlink to "$symlinkcpan", I tried to create that, but I failed with this error: $seconderror } if $seconderror; $mess .= qq{ Please make sure the directory exists and is writable. }; $CPAN::Frontend->mywarn($mess); return suggest_myconfig; } } # $@ after eval mkpath $dotcpan if (0) { # to test what happens when a race condition occurs for (reverse 1..10) { print $_, "\n"; sleep 1; } } # locking if (!$RUN_DEGRADED && !$self->{LOCKFH}) { my $fh; unless ($fh = FileHandle->new("+>>$lockfile")) { $CPAN::Frontend->mywarn(qq{ Your configuration suggests that CPAN.pm should use a working directory of $CPAN::Config->{cpan_home} Unfortunately we could not create the lock file $lockfile due to '$!'. Please make sure that the configuration variable \$CPAN::Config->{cpan_home} points to a directory where you can write a .lock file. You can set this variable in either a CPAN/MyConfig.pm or a CPAN/Config.pm in your \@INC path; }); return suggest_myconfig; } my $sleep = 1; while (!CPAN::_flock($fh, LOCK_EX|LOCK_NB)) { my $err = $! || "unknown error"; if ($sleep>3) { $CPAN::Frontend->mydie("Could not lock '$lockfile' with flock: $err; giving up\n"); } $CPAN::Frontend->mysleep($sleep+=0.1); $CPAN::Frontend->mywarn("Could not lock '$lockfile' with flock: $err; retrying\n"); } seek $fh, 0, 0; truncate $fh, 0; $fh->autoflush(1); $fh->print($$, "\n"); $fh->print(hostname(), "\n"); $self->{LOCK} = $lockfile; $self->{LOCKFH} = $fh; } $SIG{TERM} = sub { my $sig = shift; &cleanup; $CPAN::Frontend->mydie("Got SIG$sig, leaving"); }; $SIG{INT} = sub { # no blocks!!! my $sig = shift; &cleanup if $Signal; die "Got yet another signal" if $Signal > 1; $CPAN::Frontend->mydie("Got another SIG$sig") if $Signal; $CPAN::Frontend->mywarn("Caught SIG$sig, trying to continue\n"); $Signal++; }; # From: Larry Wall # Subject: Re: deprecating SIGDIE # To: perl5-porters@perl.org # Date: Thu, 30 Sep 1999 14:58:40 -0700 (PDT) # # The original intent of __DIE__ was only to allow you to substitute one # kind of death for another on an application-wide basis without respect # to whether you were in an eval or not. As a global backstop, it should # not be used any more lightly (or any more heavily :-) than class # UNIVERSAL. Any attempt to build a general exception model on it should # be politely squashed. Any bug that causes every eval {} to have to be # modified should be not so politely squashed. # # Those are my current opinions. It is also my opinion that polite # arguments degenerate to personal arguments far too frequently, and that # when they do, it's because both people wanted it to, or at least didn't # sufficiently want it not to. # # Larry # global backstop to cleanup if we should really die $SIG{__DIE__} = \&cleanup; $self->debug("Signal handler set.") if $CPAN::DEBUG; } #-> sub CPAN::DESTROY ; sub DESTROY { &cleanup; # need an eval? } #-> sub CPAN::anycwd ; sub anycwd () { my $getcwd; $getcwd = $CPAN::Config->{'getcwd'} || 'cwd'; CPAN->$getcwd(); } #-> sub CPAN::cwd ; sub cwd {Cwd::cwd();} #-> sub CPAN::getcwd ; sub getcwd {Cwd::getcwd();} #-> sub CPAN::fastcwd ; sub fastcwd {Cwd::fastcwd();} #-> sub CPAN::getdcwd ; sub getdcwd {Cwd::getdcwd();} #-> sub CPAN::backtickcwd ; sub backtickcwd {my $cwd = `cwd`; chomp $cwd; $cwd} # Adapted from Probe::Perl #-> sub CPAN::_perl_is_same sub _perl_is_same { my ($perl) = @_; return MM->maybe_command($perl) && `$perl -MConfig=myconfig -e print -e myconfig` eq Config->myconfig; } # Adapted in part from Probe::Perl #-> sub CPAN::find_perl ; sub find_perl () { if ( File::Spec->file_name_is_absolute($^X) ) { return $^X; } else { my $exe = $Config::Config{exe_ext}; my @candidates = ( File::Spec->catfile($CPAN::iCwd,$^X), $Config::Config{'perlpath'}, ); for my $perl_name ($^X, 'perl', 'perl5', "perl$]") { for my $path (File::Spec->path(), $Config::Config{'binexp'}) { if ( defined($path) && length $path && -d $path ) { my $perl = File::Spec->catfile($path,$perl_name); push @candidates, $perl; # try with extension if not provided already if ($^O eq 'VMS') { # VMS might have a file version at the end push @candidates, $perl . $exe unless $perl =~ m/$exe(;\d+)?$/i; } elsif (defined $exe && length $exe) { push @candidates, $perl . $exe unless $perl =~ m/$exe$/i; } } } } for my $perl ( @candidates ) { if (MM->maybe_command($perl) && _perl_is_same($perl)) { $^X = $perl; return $perl; } } } return $^X; # default fall back } #-> sub CPAN::exists ; sub exists { my($mgr,$class,$id) = @_; CPAN::HandleConfig->load unless $CPAN::Config_loaded++; CPAN::Index->reload; ### Carp::croak "exists called without class argument" unless $class; $id ||= ""; $id =~ s/:+/::/g if $class eq "CPAN::Module"; my $exists; if (CPAN::_sqlite_running) { $exists = (exists $META->{readonly}{$class}{$id} or $CPAN::SQLite->set($class, $id)); } else { $exists = exists $META->{readonly}{$class}{$id}; } $exists ||= exists $META->{readwrite}{$class}{$id}; # unsafe meta access, ok } #-> sub CPAN::delete ; sub delete { my($mgr,$class,$id) = @_; delete $META->{readonly}{$class}{$id}; # unsafe meta access, ok delete $META->{readwrite}{$class}{$id}; # unsafe meta access, ok } #-> sub CPAN::has_usable # has_inst is sometimes too optimistic, we should replace it with this # has_usable whenever a case is given sub has_usable { my($self,$mod,$message) = @_; return 1 if $HAS_USABLE->{$mod}; my $has_inst = $self->has_inst($mod,$message); return unless $has_inst; my $usable; $usable = { # # most of these subroutines warn on the frontend, then # die if the installed version is unusable for some # reason; has_usable() then returns false when it caught # an exception, otherwise returns true and caches that; # 'CPAN::Meta' => [ sub { require CPAN::Meta; unless (CPAN::Version->vge(CPAN::Meta->VERSION, 2.110350)) { for ("Will not use CPAN::Meta, need version 2.110350\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], 'CPAN::Meta::Requirements' => [ sub { if (defined $CPAN::Meta::Requirements::VERSION && CPAN::Version->vlt($CPAN::Meta::Requirements::VERSION, "2.120920") ) { delete $INC{"CPAN/Meta/Requirements.pm"}; } require CPAN::Meta::Requirements; unless (CPAN::Version->vge(CPAN::Meta::Requirements->VERSION, 2.120920)) { for ("Will not use CPAN::Meta::Requirements, need version 2.120920\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], 'CPAN::Reporter' => [ sub { if (defined $CPAN::Reporter::VERSION && CPAN::Version->vlt($CPAN::Reporter::VERSION, "1.2011") ) { delete $INC{"CPAN/Reporter.pm"}; } require CPAN::Reporter; unless (CPAN::Version->vge(CPAN::Reporter->VERSION, "1.2011")) { for ("Will not use CPAN::Reporter, need version 1.2011\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], LWP => [ # we frequently had "Can't locate object # method "new" via package "LWP::UserAgent" at # (eval 69) line 2006 sub {require LWP}, sub {require LWP::UserAgent}, sub {require HTTP::Request}, sub {require URI::URL; unless (CPAN::Version->vge(URI::URL::->VERSION,0.08)) { for ("Will not use URI::URL, need 0.08\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], 'Net::FTP' => [ sub { my $var = $CPAN::Config->{ftp_proxy} || $ENV{ftp_proxy}; if ($var and $var =~ /^http:/i) { # rt #110833 for ("Net::FTP cannot handle http proxy") { $CPAN::Frontend->mywarn($_); die $_; } } }, sub {require Net::FTP}, sub {require Net::Config}, ], 'IO::Socket::SSL' => [ sub { require IO::Socket::SSL; unless (CPAN::Version->vge(IO::Socket::SSL::->VERSION,1.56)) { for ("Will not use IO::Socket::SSL, need 1.56\n") { $CPAN::Frontend->mywarn($_); die $_; } } } ], 'Net::SSLeay' => [ sub { require Net::SSLeay; unless (CPAN::Version->vge(Net::SSLeay::->VERSION,1.49)) { for ("Will not use Net::SSLeay, need 1.49\n") { $CPAN::Frontend->mywarn($_); die $_; } } } ], 'HTTP::Tiny' => [ sub { require HTTP::Tiny; unless (CPAN::Version->vge(HTTP::Tiny->VERSION, 0.005)) { for ("Will not use HTTP::Tiny, need version 0.005\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], 'File::HomeDir' => [ sub {require File::HomeDir; unless (CPAN::Version->vge(File::HomeDir::->VERSION, 0.52)) { for ("Will not use File::HomeDir, need 0.52\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ], 'Archive::Tar' => [ sub {require Archive::Tar; my $demand = "1.50"; unless (CPAN::Version->vge(Archive::Tar::->VERSION, $demand)) { my $atv = Archive::Tar->VERSION; for ("You have Archive::Tar $atv, but $demand or later is recommended. Please upgrade.\n") { $CPAN::Frontend->mywarn($_); # don't die, because we may need # Archive::Tar to upgrade } } }, ], 'File::Temp' => [ # XXX we should probably delete from # %INC too so we can load after we # installed a new enough version -- # I'm not sure. sub {require File::Temp; unless (CPAN::Version->vge(File::Temp::->VERSION,0.16)) { for ("Will not use File::Temp, need 0.16\n") { $CPAN::Frontend->mywarn($_); die $_; } } }, ] }; if ($usable->{$mod}) { local @INC = @INC; pop @INC if $INC[-1] eq '.'; for my $c (0..$#{$usable->{$mod}}) { my $code = $usable->{$mod}[$c]; my $ret = eval { &$code() }; $ret = "" unless defined $ret; if ($@) { # warn "DEBUG: c[$c]\$\@[$@]ret[$ret]"; return; } } } return $HAS_USABLE->{$mod} = 1; } sub frontend { shift; $CPAN::Frontend = shift if @_; $CPAN::Frontend; } sub use_inst { my ($self, $module) = @_; unless ($self->has_inst($module)) { $self->frontend->mydie("$module not installed, cannot continue"); } } #-> sub CPAN::has_inst sub has_inst { my($self,$mod,$message) = @_; Carp::croak("CPAN->has_inst() called without an argument") unless defined $mod; my %dont = map { $_ => 1 } keys %{$CPAN::META->{dontload_hash}||{}}, keys %{$CPAN::Config->{dontload_hash}||{}}, @{$CPAN::Config->{dontload_list}||[]}; if (defined $message && $message eq "no" # as far as I remember only used by Nox || $dont{$mod} ) { $CPAN::META->{dontload_hash}{$mod}||=1; # unsafe meta access, ok return 0; } local @INC = @INC; pop @INC if $INC[-1] eq '.'; my $file = $mod; my $obj; $file =~ s|::|/|g; $file .= ".pm"; if ($INC{$file}) { # checking %INC is wrong, because $INC{LWP} may be true # although $INC{"URI/URL.pm"} may have failed. But as # I really want to say "blah loaded OK", I have to somehow # cache results. ### warn "$file in %INC"; #debug return 1; } elsif (eval { require $file }) { # eval is good: if we haven't yet read the database it's # perfect and if we have installed the module in the meantime, # it tries again. The second require is only a NOOP returning # 1 if we had success, otherwise it's retrying my $mtime = (stat $INC{$file})[9]; # privileged files loaded by has_inst; Note: we use $mtime # as a proxy for a checksum. $CPAN::Shell::reload->{$file} = $mtime; my $v = eval "\$$mod\::VERSION"; $v = $v ? " (v$v)" : ""; CPAN::Shell->optprint("load_module","CPAN: $mod loaded ok$v\n"); if ($mod eq "CPAN::WAIT") { push @CPAN::Shell::ISA, 'CPAN::WAIT'; } return 1; } elsif ($mod eq "Net::FTP") { $CPAN::Frontend->mywarn(qq{ Please, install Net::FTP as soon as possible. CPAN.pm installs it for you if you just type install Bundle::libnet }) unless $Have_warned->{"Net::FTP"}++; $CPAN::Frontend->mysleep(3); } elsif ($mod eq "Digest::SHA") { if ($Have_warned->{"Digest::SHA"}++) { $CPAN::Frontend->mywarn(qq{CPAN: checksum security checks disabled }. qq{because Digest::SHA not installed.\n}); } else { $CPAN::Frontend->mywarn(qq{ CPAN: checksum security checks disabled because Digest::SHA not installed. Please consider installing the Digest::SHA module. }); $CPAN::Frontend->mysleep(2); } } elsif ($mod eq "Module::Signature") { # NOT prefs_lookup, we are not a distro my $check_sigs = $CPAN::Config->{check_sigs}; if (not $check_sigs) { # they do not want us:-( } elsif (not $Have_warned->{"Module::Signature"}++) { # No point in complaining unless the user can # reasonably install and use it. if (eval { require Crypt::OpenPGP; 1 } || ( defined $CPAN::Config->{'gpg'} && $CPAN::Config->{'gpg'} =~ /\S/ ) ) { $CPAN::Frontend->mywarn(qq{ CPAN: Module::Signature security checks disabled because Module::Signature not installed. Please consider installing the Module::Signature module. You may also need to be able to connect over the Internet to the public key servers like pool.sks-keyservers.net or pgp.mit.edu. }); $CPAN::Frontend->mysleep(2); } } } else { delete $INC{$file}; # if it inc'd LWP but failed during, say, URI } return 0; } #-> sub CPAN::instance ; sub instance { my($mgr,$class,$id) = @_; CPAN::Index->reload; $id ||= ""; # unsafe meta access, ok? return $META->{readwrite}{$class}{$id} if exists $META->{readwrite}{$class}{$id}; $META->{readwrite}{$class}{$id} ||= $class->new(ID => $id); } #-> sub CPAN::new ; sub new { bless {}, shift; } #-> sub CPAN::_exit_messages ; sub _exit_messages { my ($self) = @_; $self->{exit_messages} ||= []; } #-> sub CPAN::cleanup ; sub cleanup { # warn "cleanup called with arg[@_] End[$CPAN::End] Signal[$Signal]"; local $SIG{__DIE__} = ''; my($message) = @_; my $i = 0; my $ineval = 0; my($subroutine); while ((undef,undef,undef,$subroutine) = caller(++$i)) { $ineval = 1, last if $subroutine eq '(eval)'; } return if $ineval && !$CPAN::End; return unless defined $META->{LOCK}; return unless -f $META->{LOCK}; $META->savehist; $META->{cachemgr} ||= CPAN::CacheMgr->new('atexit'); close $META->{LOCKFH}; unlink $META->{LOCK}; # require Carp; # Carp::cluck("DEBUGGING"); if ( $CPAN::CONFIG_DIRTY ) { $CPAN::Frontend->mywarn("Warning: Configuration not saved.\n"); } $CPAN::Frontend->myprint("Lockfile removed.\n"); for my $msg ( @{ $META->_exit_messages } ) { $CPAN::Frontend->myprint($msg); } } #-> sub CPAN::readhist sub readhist { my($self,$term,$histfile) = @_; my $histsize = $CPAN::Config->{'histsize'} || 100; $term->Attribs->{'MaxHistorySize'} = $histsize if (defined($term->Attribs->{'MaxHistorySize'})); my($fh) = FileHandle->new; open $fh, "<$histfile" or return; local $/ = "\n"; while (<$fh>) { chomp; $term->AddHistory($_); } close $fh; } #-> sub CPAN::savehist sub savehist { my($self) = @_; my($histfile,$histsize); unless ($histfile = $CPAN::Config->{'histfile'}) { $CPAN::Frontend->mywarn("No history written (no histfile specified).\n"); return; } $histsize = $CPAN::Config->{'histsize'} || 100; if ($CPAN::term) { unless ($CPAN::term->can("GetHistory")) { $CPAN::Frontend->mywarn("Terminal does not support GetHistory.\n"); return; } } else { return; } my @h = $CPAN::term->GetHistory; splice @h, 0, @h-$histsize if @h>$histsize; my($fh) = FileHandle->new; open $fh, ">$histfile" or $CPAN::Frontend->mydie("Couldn't open >$histfile: $!"); local $\ = local $, = "\n"; print $fh @h; close $fh; } #-> sub CPAN::is_tested sub is_tested { my($self,$what,$when) = @_; unless ($what) { Carp::cluck("DEBUG: empty what"); return; } $self->{is_tested}{$what} = $when; } #-> sub CPAN::reset_tested # forget all distributions tested -- resets what gets included in PERL5LIB sub reset_tested { my ($self) = @_; $self->{is_tested} = {}; } #-> sub CPAN::is_installed # unsets the is_tested flag: as soon as the thing is installed, it is # not needed in set_perl5lib anymore sub is_installed { my($self,$what) = @_; delete $self->{is_tested}{$what}; } sub _list_sorted_descending_is_tested { my($self) = @_; my $foul = 0; my @sorted = sort { ($self->{is_tested}{$b}||0) <=> ($self->{is_tested}{$a}||0) } grep { if ($foul){ 0 } elsif (-e) { 1 } else { $foul = $_; 0 } } keys %{$self->{is_tested}}; if ($foul) { $CPAN::Frontend->mywarn("Lost build_dir detected ($foul), giving up all cached test results of currently running session.\n"); for my $dbd (sort keys %{$self->{is_tested}}) { # distro-build-dir SEARCH: for my $d (sort { $a->id cmp $b->id } $CPAN::META->all_objects("CPAN::Distribution")) { if ($d->{build_dir} && $d->{build_dir} eq $dbd) { $CPAN::Frontend->mywarn(sprintf "Flushing cache for %s\n", $d->pretty_id); $d->fforce(""); last SEARCH; } } delete $self->{is_tested}{$dbd}; } return (); } else { return @sorted; } } #-> sub CPAN::set_perl5lib # Notes on max environment variable length: # - Win32 : XP or later, 8191; Win2000 or NT4, 2047 { my $fh; sub set_perl5lib { my($self,$for) = @_; unless ($for) { (undef,undef,undef,$for) = caller(1); $for =~ s/.*://; } $self->{is_tested} ||= {}; return unless %{$self->{is_tested}}; my $env = $ENV{PERL5LIB}; $env = $ENV{PERLLIB} unless defined $env; my @env; push @env, split /\Q$Config::Config{path_sep}\E/, $env if defined $env and length $env; #my @dirs = map {("$_/blib/arch", "$_/blib/lib")} keys %{$self->{is_tested}}; #$CPAN::Frontend->myprint("Prepending @dirs to PERL5LIB.\n"); my @dirs = map {("$_/blib/arch", "$_/blib/lib")} $self->_list_sorted_descending_is_tested; return if !@dirs; if (@dirs < 12) { $CPAN::Frontend->optprint('perl5lib', "Prepending @dirs to PERL5LIB for '$for'\n"); $ENV{PERL5LIB} = join $Config::Config{path_sep}, @dirs, @env; } elsif (@dirs < 24 ) { my @d = map {my $cp = $_; $cp =~ s/^\Q$CPAN::Config->{build_dir}\E/%BUILDDIR%/; $cp } @dirs; $CPAN::Frontend->optprint('perl5lib', "Prepending @d to PERL5LIB; ". "%BUILDDIR%=$CPAN::Config->{build_dir} ". "for '$for'\n" ); $ENV{PERL5LIB} = join $Config::Config{path_sep}, @dirs, @env; } else { my $cnt = keys %{$self->{is_tested}}; my $newenv = join $Config::Config{path_sep}, @dirs, @env; $CPAN::Frontend->optprint('perl5lib', sprintf ("Prepending blib/arch and blib/lib of ". "%d build dirs to PERL5LIB, reaching size %d; ". "for '%s'\n", $cnt, length($newenv), $for) ); $ENV{PERL5LIB} = $newenv; } }} 1; __END__ =head1 NAME CPAN - query, download and build perl modules from CPAN sites =head1 SYNOPSIS Interactive mode: perl -MCPAN -e shell --or-- cpan Basic commands: # Modules: cpan> install Acme::Meta # in the shell CPAN::Shell->install("Acme::Meta"); # in perl # Distributions: cpan> install NWCLARK/Acme-Meta-0.02.tar.gz # in the shell CPAN::Shell-> install("NWCLARK/Acme-Meta-0.02.tar.gz"); # in perl # module objects: $mo = CPAN::Shell->expandany($mod); $mo = CPAN::Shell->expand("Module",$mod); # same thing # distribution objects: $do = CPAN::Shell->expand("Module",$mod)->distribution; $do = CPAN::Shell->expandany($distro); # same thing $do = CPAN::Shell->expand("Distribution", $distro); # same thing =head1 DESCRIPTION The CPAN module automates or at least simplifies the make and install of perl modules and extensions. It includes some primitive searching capabilities and knows how to use LWP, HTTP::Tiny, Net::FTP and certain external download clients to fetch distributions from the net. These are fetched from one or more mirrored CPAN (Comprehensive Perl Archive Network) sites and unpacked in a dedicated directory. The CPAN module also supports named and versioned I of modules. Bundles simplify handling of sets of related modules. See Bundles below. The package contains a session manager and a cache manager. The session manager keeps track of what has been fetched, built, and installed in the current session. The cache manager keeps track of the disk space occupied by the make processes and deletes excess space using a simple FIFO mechanism. All methods provided are accessible in a programmer style and in an interactive shell style. =head2 CPAN::shell([$prompt, $command]) Starting Interactive Mode Enter interactive mode by running perl -MCPAN -e shell or cpan which puts you into a readline interface. If C and either of C or C are installed, history and command completion are supported. Once at the command line, type C for one-page help screen; the rest should be self-explanatory. The function call C takes two optional arguments: one the prompt, the second the default initial command line (the latter only works if a real ReadLine interface module is installed). The most common uses of the interactive modes are =over 2 =item Searching for authors, bundles, distribution files and modules There are corresponding one-letter commands C, C, C, and C for each of the four categories and another, C for any of the mentioned four. Each of the four entities is implemented as a class with slightly differing methods for displaying an object. Arguments to these commands are either strings exactly matching the identification string of an object, or regular expressions matched case-insensitively against various attributes of the objects. The parser only recognizes a regular expression when you enclose it with slashes. The principle is that the number of objects found influences how an item is displayed. If the search finds one item, the result is displayed with the rather verbose method C, but if more than one is found, each object is displayed with the terse method C. Examples: cpan> m Acme::MetaSyntactic Module id = Acme::MetaSyntactic CPAN_USERID BOOK (Philippe Bruhat (BooK) <[...]>) CPAN_VERSION 0.99 CPAN_FILE B/BO/BOOK/Acme-MetaSyntactic-0.99.tar.gz UPLOAD_DATE 2006-11-06 MANPAGE Acme::MetaSyntactic - Themed metasyntactic variables names INST_FILE /usr/local/lib/perl/5.10.0/Acme/MetaSyntactic.pm INST_VERSION 0.99 cpan> a BOOK Author id = BOOK EMAIL [...] FULLNAME Philippe Bruhat (BooK) cpan> d BOOK/Acme-MetaSyntactic-0.99.tar.gz Distribution id = B/BO/BOOK/Acme-MetaSyntactic-0.99.tar.gz CPAN_USERID BOOK (Philippe Bruhat (BooK) <[...]>) CONTAINSMODS Acme::MetaSyntactic Acme::MetaSyntactic::Alias [...] UPLOAD_DATE 2006-11-06 cpan> m /lorem/ Module = Acme::MetaSyntactic::loremipsum (BOOK/Acme-MetaSyntactic-0.99.tar.gz) Module Text::Lorem (ADEOLA/Text-Lorem-0.3.tar.gz) Module Text::Lorem::More (RKRIMEN/Text-Lorem-More-0.12.tar.gz) Module Text::Lorem::More::Source (RKRIMEN/Text-Lorem-More-0.12.tar.gz) cpan> i /berlin/ Distribution BEATNIK/Filter-NumberLines-0.02.tar.gz Module = DateTime::TimeZone::Europe::Berlin (DROLSKY/DateTime-TimeZone-0.7904.tar.gz) Module Filter::NumberLines (BEATNIK/Filter-NumberLines-0.02.tar.gz) Author [...] The examples illustrate several aspects: the first three queries target modules, authors, or distros directly and yield exactly one result. The last two use regular expressions and yield several results. The last one targets all of bundles, modules, authors, and distros simultaneously. When more than one result is available, they are printed in one-line format. =item C, C, C, C, C modules or distributions These commands take any number of arguments and investigate what is necessary to perform the action. Argument processing is as follows: known module name in format Foo/Bar.pm module other embedded slash distribution - with trailing slash dot directory enclosing slashes regexp known module name in format Foo::Bar module If the argument is a distribution file name (recognized by embedded slashes), it is processed. If it is a module, CPAN determines the distribution file in which this module is included and processes that, following any dependencies named in the module's META.yml or Makefile.PL (this behavior is controlled by the configuration parameter C). If an argument is enclosed in slashes it is treated as a regular expression: it is expanded and if the result is a single object (distribution, bundle or module), this object is processed. Example: install Dummy::Perl # installs the module install AUXXX/Dummy-Perl-3.14.tar.gz # installs that distribution install /Dummy-Perl-3.14/ # same if the regexp is unambiguous C downloads a distribution file and untars or unzips it, C builds it, C runs the test suite, and C installs it. Any C or C is run unconditionally. An install is also run unconditionally. But for install CPAN checks whether an install is needed and prints I if the distribution file containing the module doesn't need updating. CPAN also keeps track of what it has done within the current session and doesn't try to build a package a second time regardless of whether it succeeded or not. It does not repeat a test run if the test has been run successfully before. Same for install runs. The C pragma may precede another command (currently: C, C, C, or C) to execute the command from scratch and attempt to continue past certain errors. See the section below on the C and the C pragma. The C pragma skips the test part in the build process. Example: cpan> notest install Tk A C command results in a make clean being executed within the distribution file's working directory. =item C, C, C module or distribution C displays the README file of the associated distribution. C gets and untars (if not yet done) the distribution file, changes to the appropriate directory and opens a subshell process in that directory. C displays the module's pod documentation in html or plain text format. =item C author =item C globbing_expression The first form lists all distribution files in and below an author's CPAN directory as stored in the CHECKSUMS files distributed on CPAN. The listing recurses into subdirectories. The second form limits or expands the output with shell globbing as in the following examples: ls JV/make* ls GSAR/*make* ls */*make* The last example is very slow and outputs extra progress indicators that break the alignment of the result. Note that globbing only lists directories explicitly asked for, for example FOO/* will not list FOO/bar/Acme-Sthg-n.nn.tar.gz. This may be regarded as a bug that may be changed in some future version. =item C The C command reports all distributions that failed on one of C, C or C for some reason in the currently running shell session. =item Persistence between sessions If the C or the C module is installed a record of the internal state of all modules is written to disk after each step. The files contain a signature of the currently running perl version for later perusal. If the configurations variable C is set to a true value, then CPAN.pm reads the collected YAML files. If the stored signature matches the currently running perl, the stored state is loaded into memory such that persistence between sessions is effectively established. =item The C and the C pragma To speed things up in complex installation scenarios, CPAN.pm keeps track of what it has already done and refuses to do some things a second time. A C, a C, and an C are not repeated. A C is repeated only if the previous test was unsuccessful. The diagnostic message when CPAN.pm refuses to do something a second time is one of IC or something similar. Another situation where CPAN refuses to act is an C if the corresponding C was not successful. In all these cases, the user can override this stubborn behaviour by prepending the command with the word force, for example: cpan> force get Foo cpan> force make AUTHOR/Bar-3.14.tar.gz cpan> force test Baz cpan> force install Acme::Meta Each I command is executed with the corresponding part of its memory erased. The C pragma is a variant that emulates a C which erases the entire memory followed by the action specified, effectively restarting the whole get/make/test/install procedure from scratch. =item Lockfile Interactive sessions maintain a lockfile, by default C<~/.cpan/.lock>. Batch jobs can run without a lockfile and not disturb each other. The shell offers to run in I when another process is holding the lockfile. This is an experimental feature that is not yet tested very well. This second shell then does not write the history file, does not use the metadata file, and has a different prompt. =item Signals CPAN.pm installs signal handlers for SIGINT and SIGTERM. While you are in the cpan-shell, it is intended that you can press C<^C> anytime and return to the cpan-shell prompt. A SIGTERM will cause the cpan-shell to clean up and leave the shell loop. You can emulate the effect of a SIGTERM by sending two consecutive SIGINTs, which usually means by pressing C<^C> twice. CPAN.pm ignores SIGPIPE. If the user sets C, a SIGALRM is used during the run of the C or C subprocess. A SIGALRM is also used during module version parsing, and is controlled by C. =back =head2 CPAN::Shell The commands available in the shell interface are methods in the package CPAN::Shell. If you enter the shell command, your input is split by the Text::ParseWords::shellwords() routine, which acts like most shells do. The first word is interpreted as the method to be invoked, and the rest of the words are treated as the method's arguments. Continuation lines are supported by ending a line with a literal backslash. =head2 autobundle C writes a bundle file into the C<$CPAN::Config-E{cpan_home}/Bundle> directory. The file contains a list of all modules that are both available from CPAN and currently installed within @INC. Duplicates of each distribution are suppressed. The name of the bundle file is based on the current date and a counter, e.g. F. This is installed again by running C, or installing C from the CPAN shell. Return value: path to the written file. =head2 hosts Note: this feature is still in alpha state and may change in future versions of CPAN.pm This commands provides a statistical overview over recent download activities. The data for this is collected in the YAML file C in your C directory. If no YAML module is configured or YAML not installed, or if C is set to a value C<< <=0 >>, no stats are provided. =head2 install_tested Install all distributions that have been tested successfully but have not yet been installed. See also C. =head2 is_tested List all build directories of distributions that have been tested successfully but have not yet been installed. See also C. =head2 mkmyconfig mkmyconfig() writes your own CPAN::MyConfig file into your C<~/.cpan/> directory so that you can save your own preferences instead of the system-wide ones. =head2 r [Module|/Regexp/]... scans current perl installation for modules that have a newer version available on CPAN and provides a list of them. If called without argument, all potential upgrades are listed; if called with arguments the list is filtered to the modules and regexps given as arguments. The listing looks something like this: Package namespace installed latest in CPAN file CPAN 1.94_64 1.9600 ANDK/CPAN-1.9600.tar.gz CPAN::Reporter 1.1801 1.1902 DAGOLDEN/CPAN-Reporter-1.1902.tar.gz YAML 0.70 0.73 INGY/YAML-0.73.tar.gz YAML::Syck 1.14 1.17 AVAR/YAML-Syck-1.17.tar.gz YAML::Tiny 1.44 1.50 ADAMK/YAML-Tiny-1.50.tar.gz CGI 3.43 3.55 MARKSTOS/CGI.pm-3.55.tar.gz Module::Build::YAML 1.40 1.41 DAGOLDEN/Module-Build-0.3800.tar.gz TAP::Parser::Result::YAML 3.22 3.23 ANDYA/Test-Harness-3.23.tar.gz YAML::XS 0.34 0.35 INGY/YAML-LibYAML-0.35.tar.gz It suppresses duplicates in the column C such that distributions with many upgradeable modules are listed only once. Note that the list is not sorted. =head2 recent ***EXPERIMENTAL COMMAND*** The C command downloads a list of recent uploads to CPAN and displays them I. While the command is running, a $SIG{INT} exits the loop after displaying the current item. B: This command requires XML::LibXML installed. B: This whole command currently is just a hack and will probably change in future versions of CPAN.pm, but the general approach will likely remain. B: See also L =head2 recompile recompile() is a special command that takes no argument and runs the make/test/install cycle with brute force over all installed dynamically loadable extensions (a.k.a. XS modules) with 'force' in effect. The primary purpose of this command is to finish a network installation. Imagine you have a common source tree for two different architectures. You decide to do a completely independent fresh installation. You start on one architecture with the help of a Bundle file produced earlier. CPAN installs the whole Bundle for you, but when you try to repeat the job on the second architecture, CPAN responds with a C<"Foo up to date"> message for all modules. So you invoke CPAN's recompile on the second architecture and you're done. Another popular use for C is to act as a rescue in case your perl breaks binary compatibility. If one of the modules that CPAN uses is in turn depending on binary compatibility (so you cannot run CPAN commands), then you should try the CPAN::Nox module for recovery. =head2 report Bundle|Distribution|Module The C command temporarily turns on the C config variable, then runs the C command with the given arguments. The C pragma reruns the tests and repeats every step that might have failed before. =head2 smoke ***EXPERIMENTAL COMMAND*** B<*** WARNING: this command downloads and executes software from CPAN to your computer of completely unknown status. You should never do this with your normal account and better have a dedicated well separated and secured machine to do this. ***> The C command takes the list of recent uploads to CPAN as provided by the C command and tests them all. While the command is running $SIG{INT} is defined to mean that the current item shall be skipped. B: This whole command currently is just a hack and will probably change in future versions of CPAN.pm, but the general approach will likely remain. B: See also L =head2 upgrade [Module|/Regexp/]... The C command first runs an C command with the given arguments and then installs the newest versions of all modules that were listed by that. =head2 The four C Classes: Author, Bundle, Module, Distribution Although it may be considered internal, the class hierarchy does matter for both users and programmer. CPAN.pm deals with the four classes mentioned above, and those classes all share a set of methods. Classical single polymorphism is in effect. A metaclass object registers all objects of all kinds and indexes them with a string. The strings referencing objects have a separated namespace (well, not completely separated): Namespace Class words containing a "/" (slash) Distribution words starting with Bundle:: Bundle everything else Module or Author Modules know their associated Distribution objects. They always refer to the most recent official release. Developers may mark their releases as unstable development versions (by inserting an underscore into the module version number which will also be reflected in the distribution name when you run 'make dist'), so the really hottest and newest distribution is not always the default. If a module Foo circulates on CPAN in both version 1.23 and 1.23_90, CPAN.pm offers a convenient way to install version 1.23 by saying install Foo This would install the complete distribution file (say BAR/Foo-1.23.tar.gz) with all accompanying material. But if you would like to install version 1.23_90, you need to know where the distribution file resides on CPAN relative to the authors/id/ directory. If the author is BAR, this might be BAR/Foo-1.23_90.tar.gz; so you would have to say install BAR/Foo-1.23_90.tar.gz The first example will be driven by an object of the class CPAN::Module, the second by an object of class CPAN::Distribution. =head2 Integrating local directories Note: this feature is still in alpha state and may change in future versions of CPAN.pm Distribution objects are normally distributions from the CPAN, but there is a slightly degenerate case for Distribution objects, too, of projects held on the local disk. These distribution objects have the same name as the local directory and end with a dot. A dot by itself is also allowed for the current directory at the time CPAN.pm was used. All actions such as C, C, and C are applied directly to that directory. This gives the command C an interesting touch: while the normal mantra of installing a CPAN module without CPAN.pm is one of perl Makefile.PL perl Build.PL ( go and get prerequisites ) make ./Build make test ./Build test make install ./Build install the command C does all of this at once. It figures out which of the two mantras is appropriate, fetches and installs all prerequisites, takes care of them recursively, and finally finishes the installation of the module in the current directory, be it a CPAN module or not. The typical usage case is for private modules or working copies of projects from remote repositories on the local disk. =head2 Redirection The usual shell redirection symbols C< | > and C<< > >> are recognized by the cpan shell B. So piping to pager or redirecting output into a file works somewhat as in a normal shell, with the stipulation that you must type extra spaces. =head2 Plugin support ***EXPERIMENTAL*** Plugins are objects that implement any of currently eight methods: pre_get post_get pre_make post_make pre_test post_test pre_install post_install The C configuration parameter holds a list of strings of the form Modulename=arg0,arg1,arg2,arg3,... eg: CPAN::Plugin::Flurb=dir,/opt/pkgs/flurb/raw,verbose,1 At run time, each listed plugin is instantiated as a singleton object by running the equivalent of this pseudo code: my $plugin = ; ; my $p = $instance{$plugin} ||= Modulename->new($arg0,$arg1,...); The generated singletons are kept around from instantiation until the end of the shell session. can be reconfigured at any time at run time. While the cpan shell is running, it checks all activated plugins at each of the 8 reference points listed above and runs the respective method if it is implemented for that object. The method is called with the active CPAN::Distribution object passed in as an argument. =head1 CONFIGURATION When the CPAN module is used for the first time, a configuration dialogue tries to determine a couple of site specific options. The result of the dialog is stored in a hash reference C< $CPAN::Config > in a file CPAN/Config.pm. Default values defined in the CPAN/Config.pm file can be overridden in a user specific file: CPAN/MyConfig.pm. Such a file is best placed in C<$HOME/.cpan/CPAN/MyConfig.pm>, because C<$HOME/.cpan> is added to the search path of the CPAN module before the use() or require() statements. The mkmyconfig command writes this file for you. If you want to keep your own CPAN/MyConfig.pm somewhere else, you should load it before loading CPAN.pm, e.g.: perl -I/tmp/somewhere -MCPAN::MyConfig -MCPAN -eshell --or-- perl -I/tmp/somewhere -MCPAN::MyConfig -S cpan Once you are in the shell you can change your configuration as follows. The C command has various bells and whistles: =over =item completion support If you have a ReadLine module installed, you can hit TAB at any point of the commandline and C will offer you completion for the built-in subcommands and/or config variable names. =item displaying some help: o conf help Displays a short help =item displaying current values: o conf [KEY] Displays the current value(s) for this config variable. Without KEY, displays all subcommands and config variables. Example: o conf shell If KEY starts and ends with a slash, the string in between is treated as a regular expression and only keys matching this regexp are displayed Example: o conf /color/ =item changing of scalar values: o conf KEY VALUE Sets the config variable KEY to VALUE. The empty string can be specified as usual in shells, with C<''> or C<""> Example: o conf wget /usr/bin/wget =item changing of list values: o conf KEY SHIFT|UNSHIFT|PUSH|POP|SPLICE|LIST If a config variable name ends with C, it is a list. C removes the first element of the list, C removes the last element of the list. C prepends a list of values to the list, C appends a list of valued to the list. Likewise, C passes the LIST to the corresponding splice command. Finally, any other list of arguments is taken as a new list value for the KEY variable discarding the previous value. Examples: o conf urllist unshift http://cpan.dev.local/CPAN o conf urllist splice 3 1 o conf urllist http://cpan1.local http://cpan2.local ftp://ftp.perl.org =item reverting to saved: o conf defaults Reverts all config variables to the state in the saved config file. =item saving the config: o conf commit Saves all config variables to the current config file (CPAN/Config.pm or CPAN/MyConfig.pm that was loaded at start). =back The configuration dialog can be started any time later again by issuing the command C< o conf init > in the CPAN shell. A subset of the configuration dialog can be run by issuing C where WORD is any valid config variable or a regular expression. =head2 Config Variables The following keys in the hash reference $CPAN::Config are currently defined: allow_installing_module_downgrades allow or disallow installing module downgrades allow_installing_outdated_dists allow or disallow installing modules that are indexed in the cpan index pointing to a distro with a higher distro-version number applypatch path to external prg auto_commit commit all changes to config variables to disk build_cache size of cache for directories to build modules build_dir locally accessible directory to build modules build_dir_reuse boolean if distros in build_dir are persistent build_requires_install_policy to install or not to install when a module is only needed for building. yes|no|ask/yes|ask/no bzip2 path to external prg cache_metadata use serializer to cache metadata check_sigs if signatures should be verified cleanup_after_install remove build directory immediately after a successful install and remember that for the duration of the session colorize_debug Term::ANSIColor attributes for debugging output colorize_output boolean if Term::ANSIColor should colorize output colorize_print Term::ANSIColor attributes for normal output colorize_warn Term::ANSIColor attributes for warnings commandnumber_in_prompt boolean if you want to see current command number commands_quote preferred character to use for quoting external commands when running them. Defaults to double quote on Windows, single tick everywhere else; can be set to space to disable quoting connect_to_internet_ok whether to ask if opening a connection is ok before urllist is specified cpan_home local directory reserved for this package curl path to external prg dontload_hash DEPRECATED dontload_list arrayref: modules in the list will not be loaded by the CPAN::has_inst() routine ftp path to external prg ftp_passive if set, the environment variable FTP_PASSIVE is set for downloads ftp_proxy proxy host for ftp requests ftpstats_period max number of days to keep download statistics ftpstats_size max number of items to keep in the download statistics getcwd see below gpg path to external prg gzip location of external program gzip halt_on_failure stop processing after the first failure of queued items or dependencies histfile file to maintain history between sessions histsize maximum number of lines to keep in histfile http_proxy proxy host for http requests inactivity_timeout breaks interactive Makefile.PLs or Build.PLs after this many seconds inactivity. Set to 0 to disable timeouts. index_expire refetch index files after this many days inhibit_startup_message if true, suppress the startup message keep_source_where directory in which to keep the source (if we do) load_module_verbosity report loading of optional modules used by CPAN.pm lynx path to external prg make location of external make program make_arg arguments that should always be passed to 'make' make_install_make_command the make command for running 'make install', for example 'sudo make' make_install_arg same as make_arg for 'make install' makepl_arg arguments passed to 'perl Makefile.PL' mbuild_arg arguments passed to './Build' mbuild_install_arg arguments passed to './Build install' mbuild_install_build_command command to use instead of './Build' when we are in the install stage, for example 'sudo ./Build' mbuildpl_arg arguments passed to 'perl Build.PL' ncftp path to external prg ncftpget path to external prg no_proxy don't proxy to these hosts/domains (comma separated list) pager location of external program more (or any pager) password your password if you CPAN server wants one patch path to external prg patches_dir local directory containing patch files perl5lib_verbosity verbosity level for PERL5LIB additions plugin_list list of active hooks (see Plugin support above and the CPAN::Plugin module) prefer_external_tar per default all untar operations are done with Archive::Tar; by setting this variable to true the external tar command is used if available prefer_installer legal values are MB and EUMM: if a module comes with both a Makefile.PL and a Build.PL, use the former (EUMM) or the latter (MB); if the module comes with only one of the two, that one will be used no matter the setting prerequisites_policy what to do if you are missing module prerequisites ('follow' automatically, 'ask' me, or 'ignore') For 'follow', also sets PERL_AUTOINSTALL and PERL_EXTUTILS_AUTOINSTALL for "--defaultdeps" if not already set prefs_dir local directory to store per-distro build options proxy_user username for accessing an authenticating proxy proxy_pass password for accessing an authenticating proxy pushy_https use https to cpan.org when possible, otherwise use http to cpan.org and issue a warning randomize_urllist add some randomness to the sequence of the urllist recommends_policy whether recommended prerequisites should be included scan_cache controls scanning of cache ('atstart', 'atexit' or 'never') shell your favorite shell show_unparsable_versions boolean if r command tells which modules are versionless show_upload_date boolean if commands should try to determine upload date show_zero_versions boolean if r command tells for which modules $version==0 suggests_policy whether suggested prerequisites should be included tar location of external program tar tar_verbosity verbosity level for the tar command term_is_latin deprecated: if true Unicode is translated to ISO-8859-1 (and nonsense for characters outside latin range) term_ornaments boolean to turn ReadLine ornamenting on/off test_report email test reports (if CPAN::Reporter is installed) trust_test_report_history skip testing when previously tested ok (according to CPAN::Reporter history) unzip location of external program unzip urllist arrayref to nearby CPAN sites (or equivalent locations) urllist_ping_external use external ping command when autoselecting mirrors urllist_ping_verbose increase verbosity when autoselecting mirrors use_prompt_default set PERL_MM_USE_DEFAULT for configure/make/test/install use_sqlite use CPAN::SQLite for metadata storage (fast and lean) username your username if you CPAN server wants one version_timeout stops version parsing after this many seconds. Default is 15 secs. Set to 0 to disable. wait_list arrayref to a wait server to try (See CPAN::WAIT) wget path to external prg yaml_load_code enable YAML code deserialisation via CPAN::DeferredCode yaml_module which module to use to read/write YAML files You can set and query each of these options interactively in the cpan shell with the C or the C command as specified below. =over 2 =item Cscalar optionE> prints the current value of the I =item Cscalar optionE EvalueE> Sets the value of the I to I =item Clist optionE> prints the current value of the I in MakeMaker's neatvalue format. =item Clist optionE [shift|pop]> shifts or pops the array in the I variable =item Clist optionE [unshift|push|splice] ElistE> works like the corresponding perl commands. =item interactive editing: o conf init [MATCH|LIST] Runs an interactive configuration dialog for matching variables. Without argument runs the dialog over all supported config variables. To specify a MATCH the argument must be enclosed by slashes. Examples: o conf init ftp_passive ftp_proxy o conf init /color/ Note: this method of setting config variables often provides more explanation about the functioning of a variable than the manpage. =back =head2 CPAN::anycwd($path): Note on config variable getcwd CPAN.pm changes the current working directory often and needs to determine its own current working directory. By default it uses Cwd::cwd, but if for some reason this doesn't work on your system, configure alternatives according to the following table: =over 4 =item cwd Calls Cwd::cwd =item getcwd Calls Cwd::getcwd =item fastcwd Calls Cwd::fastcwd =item getdcwd Calls Cwd::getdcwd =item backtickcwd Calls the external command cwd. =back =head2 Note on the format of the urllist parameter urllist parameters are URLs according to RFC 1738. We do a little guessing if your URL is not compliant, but if you have problems with C URLs, please try the correct format. Either: file://localhost/whatever/ftp/pub/CPAN/ or file:///home/ftp/pub/CPAN/ =head2 The urllist parameter has CD-ROM support The C parameter of the configuration table contains a list of URLs used for downloading. If the list contains any C URLs, CPAN always tries there first. This feature is disabled for index files. So the recommendation for the owner of a CD-ROM with CPAN contents is: include your local, possibly outdated CD-ROM as a C URL at the end of urllist, e.g. o conf urllist push file://localhost/CDROM/CPAN CPAN.pm will then fetch the index files from one of the CPAN sites that come at the beginning of urllist. It will later check for each module to see whether there is a local copy of the most recent version. Another peculiarity of urllist is that the site that we could successfully fetch the last file from automatically gets a preference token and is tried as the first site for the next request. So if you add a new site at runtime it may happen that the previously preferred site will be tried another time. This means that if you want to disallow a site for the next transfer, it must be explicitly removed from urllist. =head2 Maintaining the urllist parameter If you have YAML.pm (or some other YAML module configured in C) installed, CPAN.pm collects a few statistical data about recent downloads. You can view the statistics with the C command or inspect them directly by looking into the C file in your C directory. To get some interesting statistics, it is recommended that C be set; this introduces some amount of randomness into the URL selection. =head2 The C and C dependency declarations Since CPAN.pm version 1.88_51 modules declared as C by a distribution are treated differently depending on the config variable C. By setting C to C, such a module is not installed. It is only built and tested, and then kept in the list of tested but uninstalled modules. As such, it is available during the build of the dependent module by integrating the path to the C and C directories in the environment variable PERL5LIB. If C is set to C, then both modules declared as C and those declared as C are treated alike. By setting to C or C, CPAN.pm asks the user and sets the default accordingly. =head2 Configuration of the allow_installing_* parameters The C parameters are evaluated during the C phase. If set to C, they allow the testing and the installation of the current distro and otherwise have no effect. If set to C, they may abort the build (preventing testing and installing), depending on the contents of the C directory. The C directory is the directory that holds all the files that would usually be installed in the C phase. C compares the C directory with the CPAN index. If it finds something there that belongs, according to the index, to a different dist, it aborts the current build. C compares the C directory with already installed modules, actually their version numbers, as determined by ExtUtils::MakeMaker or equivalent. If a to-be-installed module would downgrade an already installed module, the current build is aborted. An interesting twist occurs when a distroprefs document demands the installation of an outdated dist via goto while C forbids it. Without additional provisions, this would let the C win and the distroprefs lose. So the proper arrangement in such a case is to write a second distroprefs document for the distro that C points to and overrule the C there. E.g.: --- match: distribution: "^MAUKE/Keyword-Simple-0.04.tar.gz" goto: "MAUKE/Keyword-Simple-0.03.tar.gz" --- match: distribution: "^MAUKE/Keyword-Simple-0.03.tar.gz" cpanconfig: allow_installing_outdated_dists: yes =head2 Configuration for individual distributions (I) (B This feature has been introduced in CPAN.pm 1.8854) Distributions on CPAN usually behave according to what we call the CPAN mantra. Or since the advent of Module::Build we should talk about two mantras: perl Makefile.PL perl Build.PL make ./Build make test ./Build test make install ./Build install But some modules cannot be built with this mantra. They try to get some extra data from the user via the environment, extra arguments, or interactively--thus disturbing the installation of large bundles like Phalanx100 or modules with many dependencies like Plagger. The distroprefs system of C addresses this problem by allowing the user to specify extra informations and recipes in YAML files to either =over =item pass additional arguments to one of the four commands, =item set environment variables =item instantiate an Expect object that reads from the console, waits for some regular expressions and enters some answers =item temporarily override assorted C configuration variables =item specify dependencies the original maintainer forgot =item disable the installation of an object altogether =back See the YAML and Data::Dumper files that come with the C distribution in the C directory for examples. =head2 Filenames The YAML files themselves must have the C<.yml> extension; all other files are ignored (for two exceptions see I below). The containing directory can be specified in C in the C config variable. Try C in the CPAN shell to set and activate the distroprefs system. Every YAML file may contain arbitrary documents according to the YAML specification, and every document is treated as an entity that can specify the treatment of a single distribution. Filenames can be picked arbitrarily; C always reads all files (in alphabetical order) and takes the key C (see below in I) as a hashref containing match criteria that determine if the current distribution matches the YAML document or not. =head2 Fallback Data::Dumper and Storable If neither your configured C nor YAML.pm is installed, CPAN.pm falls back to using Data::Dumper and Storable and looks for files with the extensions C<.dd> or C<.st> in the C directory. These files are expected to contain one or more hashrefs. For Data::Dumper generated files, this is expected to be done with by defining C<$VAR1>, C<$VAR2>, etc. The YAML shell would produce these with the command ysh < somefile.yml > somefile.dd For Storable files the rule is that they must be constructed such that C returns an array reference and the array elements represent one distropref object each. The conversion from YAML would look like so: perl -MYAML=LoadFile -MStorable=nstore -e ' @y=LoadFile(shift); nstore(\@y, shift)' somefile.yml somefile.st In bootstrapping situations it is usually sufficient to translate only a few YAML files to Data::Dumper for crucial modules like C, C and C. If you prefer Storable over Data::Dumper, remember to pull out a Storable version that writes an older format than all the other Storable versions that will need to read them. =head2 Blueprint The following example contains all supported keywords and structures with the exception of C which can be used instead of C. --- comment: "Demo" match: module: "Dancing::Queen" distribution: "^CHACHACHA/Dancing-" not_distribution: "\.zip$" perl: "/usr/local/cariba-perl/bin/perl" perlconfig: archname: "freebsd" not_cc: "gcc" env: DANCING_FLOOR: "Shubiduh" disabled: 1 cpanconfig: make: gmake pl: args: - "--somearg=specialcase" env: {} expect: - "Which is your favorite fruit" - "apple\n" make: args: - all - extra-all env: {} expect: [] commandline: "echo SKIPPING make" test: args: [] env: {} expect: [] install: args: [] env: WANT_TO_INSTALL: YES expect: - "Do you really want to install" - "y\n" patches: - "ABCDE/Fedcba-3.14-ABCDE-01.patch" depends: configure_requires: LWP: 5.8 build_requires: Test::Exception: 0.25 requires: Spiffy: 0.30 =head2 Language Specs Every YAML document represents a single hash reference. The valid keys in this hash are as follows: =over =item comment [scalar] A comment =item cpanconfig [hash] Temporarily override assorted C configuration variables. Supported are: C, C, C, C, C, C. Please report as a bug when you need another one supported. =item depends [hash] *** EXPERIMENTAL FEATURE *** All three types, namely C, C, and C are supported in the way specified in the META.yml specification. The current implementation I the specified dependencies with those declared by the package maintainer. In a future implementation this may be changed to override the original declaration. =item disabled [boolean] Specifies that this distribution shall not be processed at all. =item features [array] *** EXPERIMENTAL FEATURE *** Experimental implementation to deal with optional_features from META.yml. Still needs coordination with installer software and currently works only for META.yml declaring C. Use with caution. =item goto [string] The canonical name of a delegate distribution to install instead. Useful when a new version, although it tests OK itself, breaks something else or a developer release or a fork is already uploaded that is better than the last released version. =item install [hash] Processing instructions for the C or C<./Build install> phase of the CPAN mantra. See below under I. =item make [hash] Processing instructions for the C or C<./Build> phase of the CPAN mantra. See below under I. =item match [hash] A hashref with one or more of the keys C, C, C, C, and C that specify whether a document is targeted at a specific CPAN distribution or installation. Keys prefixed with C negates the corresponding match. The corresponding values are interpreted as regular expressions. The C related one will be matched against the canonical distribution name, e.g. "AUTHOR/Foo-Bar-3.14.tar.gz". The C related one will be matched against I modules contained in the distribution until one module matches. The C related one will be matched against C<$^X> (but with the absolute path). The value associated with C is itself a hashref that is matched against corresponding values in the C<%Config::Config> hash living in the C module. Keys prefixed with C negates the corresponding match. The value associated with C is itself a hashref that is matched against corresponding values in the C<%ENV> hash. Keys prefixed with C negates the corresponding match. If more than one restriction of C, C, etc. is specified, the results of the separately computed match values must all match. If so, the hashref represented by the YAML document is returned as the preference structure for the current distribution. =item patches [array] An array of patches on CPAN or on the local disk to be applied in order via an external patch program. If the value for the C<-p> parameter is C<0> or C<1> is determined by reading the patch beforehand. The path to each patch is either an absolute path on the local filesystem or relative to a patch directory specified in the C configuration variable or in the format of a canonical distro name. For examples please consult the distroprefs/ directory in the CPAN.pm distribution (these examples are not installed by default). Note: if the C program is installed and C knows about it B a patch is written by the C program, then C lets C apply the patch. Both C and C are available from CPAN in the C distribution. =item pl [hash] Processing instructions for the C or C phase of the CPAN mantra. See below under I. =item test [hash] Processing instructions for the C or C<./Build test> phase of the CPAN mantra. See below under I. =back =head2 Processing Instructions =over =item args [array] Arguments to be added to the command line =item commandline A full commandline to run via C. During execution, the environment variable PERL is set to $^X (but with an absolute path). If C is specified, C is not used. =item eexpect [hash] Extended C. This is a hash reference with four allowed keys, C, C, C, and C. You must install the C module to use C. CPAN.pm does not install it for you. C may have the values C for the case where all questions come in the order written down and C for the case where the questions may come in any order. The default mode is C. C denotes a timeout in seconds. Floating-point timeouts are OK. With C, the timeout denotes the timeout per question; with C it denotes the timeout per byte received from the stream or questions. C is a reference to an array that contains alternating questions and answers. Questions are regular expressions and answers are literal strings. The Expect module watches the stream from the execution of the external program (C, C, C, etc.). For C, the CPAN.pm injects the corresponding answer as soon as the stream matches the regular expression. For C CPAN.pm answers a question as soon as the timeout is reached for the next byte in the input stream. In this mode you can use the C parameter to decide what will happen with a question-answer pair after it has been used. In the default case (reuse=0) it is removed from the array, avoiding being used again accidentally. If you want to answer the question C several times, then it must be included in the array at least as often as you want this answer to be given. Setting the parameter C to 1 makes this repetition unnecessary. =item env [hash] Environment variables to be set during the command =item expect [array] You must install the C module to use C. CPAN.pm does not install it for you. C<< expect: >> is a short notation for this C: eexpect: mode: deterministic timeout: 15 talk: =back =head2 Schema verification with C If you have the C module installed (which is part of the Bundle::CPANxxl), then all your distroprefs files are checked for syntactic correctness. =head2 Example Distroprefs Files C comes with a collection of example YAML files. Note that these are really just examples and should not be used without care because they cannot fit everybody's purpose. After all, the authors of the packages that ask questions had a need to ask, so you should watch their questions and adjust the examples to your environment and your needs. You have been warned:-) =head1 PROGRAMMER'S INTERFACE If you do not enter the shell, shell commands are available both as methods (Cinstall(...)>) and as functions in the calling package (C). Before calling low-level commands, it makes sense to initialize components of CPAN you need, e.g.: CPAN::HandleConfig->load; CPAN::Shell::setup_output; CPAN::Index->reload; High-level commands do such initializations automatically. There's currently only one class that has a stable interface - CPAN::Shell. All commands that are available in the CPAN shell are methods of the class CPAN::Shell. The arguments on the commandline are passed as arguments to the method. So if you take for example the shell command notest install A B C the actually executed command is CPAN::Shell->notest("install","A","B","C"); Each of the commands that produce listings of modules (C, C, C) also return a list of the IDs of all modules within the list. =over 2 =item expand($type,@things) The IDs of all objects available within a program are strings that can be expanded to the corresponding real objects with the Cexpand("Module",@things)> method. Expand returns a list of CPAN::Module objects according to the C<@things> arguments given. In scalar context, it returns only the first element of the list. =item expandany(@things) Like expand, but returns objects of the appropriate type, i.e. CPAN::Bundle objects for bundles, CPAN::Module objects for modules, and CPAN::Distribution objects for distributions. Note: it does not expand to CPAN::Author objects. =item Programming Examples This enables the programmer to do operations that combine functionalities that are available in the shell. # install everything that is outdated on my disk: perl -MCPAN -e 'CPAN::Shell->install(CPAN::Shell->r)' # install my favorite programs if necessary: for $mod (qw(Net::FTP Digest::SHA Data::Dumper)) { CPAN::Shell->install($mod); } # list all modules on my disk that have no VERSION number for $mod (CPAN::Shell->expand("Module","/./")) { next unless $mod->inst_file; # MakeMaker convention for undefined $VERSION: next unless $mod->inst_version eq "undef"; print "No VERSION in ", $mod->id, "\n"; } # find out which distribution on CPAN contains a module: print CPAN::Shell->expand("Module","Apache::Constants")->cpan_file Or if you want to schedule a I job to watch CPAN, you could list all modules that need updating. First a quick and dirty way: perl -e 'use CPAN; CPAN::Shell->r;' If you don't want any output should all modules be up to date, parse the output of above command for the regular expression C and decide to mail the output only if it doesn't match. If you prefer to do it more in a programmerish style in one single process, something like this may better suit you: # list all modules on my disk that have newer versions on CPAN for $mod (CPAN::Shell->expand("Module","/./")) { next unless $mod->inst_file; next if $mod->uptodate; printf "Module %s is installed as %s, could be updated to %s from CPAN\n", $mod->id, $mod->inst_version, $mod->cpan_version; } If that gives too much output every day, you may want to watch only for three modules. You can write for $mod (CPAN::Shell->expand("Module","/Apache|LWP|CGI/")) { as the first line instead. Or you can combine some of the above tricks: # watch only for a new mod_perl module $mod = CPAN::Shell->expand("Module","mod_perl"); exit if $mod->uptodate; # new mod_perl arrived, let me know all update recommendations CPAN::Shell->r; =back =head2 Methods in the other Classes =over 4 =item CPAN::Author::as_glimpse() Returns a one-line description of the author =item CPAN::Author::as_string() Returns a multi-line description of the author =item CPAN::Author::email() Returns the author's email address =item CPAN::Author::fullname() Returns the author's name =item CPAN::Author::name() An alias for fullname =item CPAN::Bundle::as_glimpse() Returns a one-line description of the bundle =item CPAN::Bundle::as_string() Returns a multi-line description of the bundle =item CPAN::Bundle::clean() Recursively runs the C method on all items contained in the bundle. =item CPAN::Bundle::contains() Returns a list of objects' IDs contained in a bundle. The associated objects may be bundles, modules or distributions. =item CPAN::Bundle::force($method,@args) Forces CPAN to perform a task that it normally would have refused to do. Force takes as arguments a method name to be called and any number of additional arguments that should be passed to the called method. The internals of the object get the needed changes so that CPAN.pm does not refuse to take the action. The C is passed recursively to all contained objects. See also the section above on the C and the C pragma. =item CPAN::Bundle::get() Recursively runs the C method on all items contained in the bundle =item CPAN::Bundle::inst_file() Returns the highest installed version of the bundle in either @INC or C<< $CPAN::Config->{cpan_home} >>. Note that this is different from CPAN::Module::inst_file. =item CPAN::Bundle::inst_version() Like CPAN::Bundle::inst_file, but returns the $VERSION =item CPAN::Bundle::uptodate() Returns 1 if the bundle itself and all its members are up-to-date. =item CPAN::Bundle::install() Recursively runs the C method on all items contained in the bundle =item CPAN::Bundle::make() Recursively runs the C method on all items contained in the bundle =item CPAN::Bundle::readme() Recursively runs the C method on all items contained in the bundle =item CPAN::Bundle::test() Recursively runs the C method on all items contained in the bundle =item CPAN::Distribution::as_glimpse() Returns a one-line description of the distribution =item CPAN::Distribution::as_string() Returns a multi-line description of the distribution =item CPAN::Distribution::author Returns the CPAN::Author object of the maintainer who uploaded this distribution =item CPAN::Distribution::pretty_id() Returns a string of the form "AUTHORID/TARBALL", where AUTHORID is the author's PAUSE ID and TARBALL is the distribution filename. =item CPAN::Distribution::base_id() Returns the distribution filename without any archive suffix. E.g "Foo-Bar-0.01" =item CPAN::Distribution::clean() Changes to the directory where the distribution has been unpacked and runs C there. =item CPAN::Distribution::containsmods() Returns a list of IDs of modules contained in a distribution file. Works only for distributions listed in the 02packages.details.txt.gz file. This typically means that just most recent version of a distribution is covered. =item CPAN::Distribution::cvs_import() Changes to the directory where the distribution has been unpacked and runs something like cvs -d $cvs_root import -m $cvs_log $cvs_dir $userid v$version there. =item CPAN::Distribution::dir() Returns the directory into which this distribution has been unpacked. =item CPAN::Distribution::force($method,@args) Forces CPAN to perform a task that it normally would have refused to do. Force takes as arguments a method name to be called and any number of additional arguments that should be passed to the called method. The internals of the object get the needed changes so that CPAN.pm does not refuse to take the action. See also the section above on the C and the C pragma. =item CPAN::Distribution::get() Downloads the distribution from CPAN and unpacks it. Does nothing if the distribution has already been downloaded and unpacked within the current session. =item CPAN::Distribution::install() Changes to the directory where the distribution has been unpacked and runs the external command C there. If C has not yet been run, it will be run first. A C is issued in any case and if this fails, the install is cancelled. The cancellation can be avoided by letting C run the C for you. This install method only has the power to install the distribution if there are no dependencies in the way. To install an object along with all its dependencies, use CPAN::Shell->install. Note that install() gives no meaningful return value. See uptodate(). =item CPAN::Distribution::isa_perl() Returns 1 if this distribution file seems to be a perl distribution. Normally this is derived from the file name only, but the index from CPAN can contain a hint to achieve a return value of true for other filenames too. =item CPAN::Distribution::look() Changes to the directory where the distribution has been unpacked and opens a subshell there. Exiting the subshell returns. =item CPAN::Distribution::make() First runs the C method to make sure the distribution is downloaded and unpacked. Changes to the directory where the distribution has been unpacked and runs the external commands C or C and C there. =item CPAN::Distribution::perldoc() Downloads the pod documentation of the file associated with a distribution (in HTML format) and runs it through the external command I specified in C<< $CPAN::Config->{lynx} >>. If I isn't available, it converts it to plain text with the external command I and runs it through the pager specified in C<< $CPAN::Config->{pager} >>. =item CPAN::Distribution::prefs() Returns the hash reference from the first matching YAML file that the user has deposited in the C directory. The first succeeding match wins. The files in the C are processed alphabetically, and the canonical distro name (e.g. AUTHOR/Foo-Bar-3.14.tar.gz) is matched against the regular expressions stored in the $root->{match}{distribution} attribute value. Additionally all module names contained in a distribution are matched against the regular expressions in the $root->{match}{module} attribute value. The two match values are ANDed together. Each of the two attributes are optional. =item CPAN::Distribution::prereq_pm() Returns the hash reference that has been announced by a distribution as the C and C elements. These can be declared either by the C (if authoritative) or can be deposited after the run of C in the file C<./_build/prereqs> or after the run of C written as the C hash in a comment in the produced C. I: this method only works after an attempt has been made to C the distribution. Returns undef otherwise. =item CPAN::Distribution::readme() Downloads the README file associated with a distribution and runs it through the pager specified in C<< $CPAN::Config->{pager} >>. =item CPAN::Distribution::reports() Downloads report data for this distribution from www.cpantesters.org and displays a subset of them. =item CPAN::Distribution::read_yaml() Returns the content of the META.yml of this distro as a hashref. Note: works only after an attempt has been made to C the distribution. Returns undef otherwise. Also returns undef if the content of META.yml is not authoritative. (The rules about what exactly makes the content authoritative are still in flux.) =item CPAN::Distribution::test() Changes to the directory where the distribution has been unpacked and runs C there. =item CPAN::Distribution::uptodate() Returns 1 if all the modules contained in the distribution are up-to-date. Relies on containsmods. =item CPAN::Index::force_reload() Forces a reload of all indices. =item CPAN::Index::reload() Reloads all indices if they have not been read for more than C<< $CPAN::Config->{index_expire} >> days. =item CPAN::InfoObj::dump() CPAN::Author, CPAN::Bundle, CPAN::Module, and CPAN::Distribution inherit this method. It prints the data structure associated with an object. Useful for debugging. Note: the data structure is considered internal and thus subject to change without notice. =item CPAN::Module::as_glimpse() Returns a one-line description of the module in four columns: The first column contains the word C, the second column consists of one character: an equals sign if this module is already installed and up-to-date, a less-than sign if this module is installed but can be upgraded, and a space if the module is not installed. The third column is the name of the module and the fourth column gives maintainer or distribution information. =item CPAN::Module::as_string() Returns a multi-line description of the module =item CPAN::Module::clean() Runs a clean on the distribution associated with this module. =item CPAN::Module::cpan_file() Returns the filename on CPAN that is associated with the module. =item CPAN::Module::cpan_version() Returns the latest version of this module available on CPAN. =item CPAN::Module::cvs_import() Runs a cvs_import on the distribution associated with this module. =item CPAN::Module::description() Returns a 44 character description of this module. Only available for modules listed in The Module List (CPAN/modules/00modlist.long.html or 00modlist.long.txt.gz) =item CPAN::Module::distribution() Returns the CPAN::Distribution object that contains the current version of this module. =item CPAN::Module::dslip_status() Returns a hash reference. The keys of the hash are the letters C, C, C, C, and

, for development status, support level, language, interface and public licence respectively. The data for the DSLIP status are collected by pause.perl.org when authors register their namespaces. The values of the 5 hash elements are one-character words whose meaning is described in the table below. There are also 5 hash elements C, C, C, C, and that carry a more verbose value of the 5 status variables. Where the 'DSLIP' characters have the following meanings: D - Development Stage (Note: *NO IMPLIED TIMESCALES*): i - Idea, listed to gain consensus or as a placeholder c - under construction but pre-alpha (not yet released) a/b - Alpha/Beta testing R - Released M - Mature (no rigorous definition) S - Standard, supplied with Perl 5 S - Support Level: m - Mailing-list d - Developer u - Usenet newsgroup comp.lang.perl.modules n - None known, try comp.lang.perl.modules a - abandoned; volunteers welcome to take over maintenance L - Language Used: p - Perl-only, no compiler needed, should be platform independent c - C and perl, a C compiler will be needed h - Hybrid, written in perl with optional C code, no compiler needed + - C++ and perl, a C++ compiler will be needed o - perl and another language other than C or C++ I - Interface Style f - plain Functions, no references used h - hybrid, object and function interfaces available n - no interface at all (huh?) r - some use of unblessed References or ties O - Object oriented using blessed references and/or inheritance P - Public License p - Standard-Perl: user may choose between GPL and Artistic g - GPL: GNU General Public License l - LGPL: "GNU Lesser General Public License" (previously known as "GNU Library General Public License") b - BSD: The BSD License a - Artistic license alone 2 - Artistic license 2.0 or later o - open source: approved by www.opensource.org d - allows distribution without restrictions r - restricted distribution n - no license at all =item CPAN::Module::force($method,@args) Forces CPAN to perform a task it would normally refuse to do. Force takes as arguments a method name to be invoked and any number of additional arguments to pass that method. The internals of the object get the needed changes so that CPAN.pm does not refuse to take the action. See also the section above on the C and the C pragma. =item CPAN::Module::get() Runs a get on the distribution associated with this module. =item CPAN::Module::inst_file() Returns the filename of the module found in @INC. The first file found is reported, just as perl itself stops searching @INC once it finds a module. =item CPAN::Module::available_file() Returns the filename of the module found in PERL5LIB or @INC. The first file found is reported. The advantage of this method over C is that modules that have been tested but not yet installed are included because PERL5LIB keeps track of tested modules. =item CPAN::Module::inst_version() Returns the version number of the installed module in readable format. =item CPAN::Module::available_version() Returns the version number of the available module in readable format. =item CPAN::Module::install() Runs an C on the distribution associated with this module. =item CPAN::Module::look() Changes to the directory where the distribution associated with this module has been unpacked and opens a subshell there. Exiting the subshell returns. =item CPAN::Module::make() Runs a C on the distribution associated with this module. =item CPAN::Module::manpage_headline() If module is installed, peeks into the module's manpage, reads the headline, and returns it. Moreover, if the module has been downloaded within this session, does the equivalent on the downloaded module even if it hasn't been installed yet. =item CPAN::Module::perldoc() Runs a C on this module. =item CPAN::Module::readme() Runs a C on the distribution associated with this module. =item CPAN::Module::reports() Calls the reports() method on the associated distribution object. =item CPAN::Module::test() Runs a C on the distribution associated with this module. =item CPAN::Module::uptodate() Returns 1 if the module is installed and up-to-date. =item CPAN::Module::userid() Returns the author's ID of the module. =back =head2 Cache Manager Currently the cache manager only keeps track of the build directory ($CPAN::Config->{build_dir}). It is a simple FIFO mechanism that deletes complete directories below C as soon as the size of all directories there gets bigger than $CPAN::Config->{build_cache} (in MB). The contents of this cache may be used for later re-installations that you intend to do manually, but will never be trusted by CPAN itself. This is due to the fact that the user might use these directories for building modules on different architectures. There is another directory ($CPAN::Config->{keep_source_where}) where the original distribution files are kept. This directory is not covered by the cache manager and must be controlled by the user. If you choose to have the same directory as build_dir and as keep_source_where directory, then your sources will be deleted with the same fifo mechanism. =head2 Bundles A bundle is just a perl module in the namespace Bundle:: that does not define any functions or methods. It usually only contains documentation. It starts like a perl module with a package declaration and a $VERSION variable. After that the pod section looks like any other pod with the only difference being that I exists starting with (verbatim): =head1 CONTENTS In this pod section each line obeys the format Module_Name [Version_String] [- optional text] The only required part is the first field, the name of a module (e.g. Foo::Bar, i.e. I the name of the distribution file). The rest of the line is optional. The comment part is delimited by a dash just as in the man page header. The distribution of a bundle should follow the same convention as other distributions. Bundles are treated specially in the CPAN package. If you say 'install Bundle::Tkkit' (assuming such a bundle exists), CPAN will install all the modules in the CONTENTS section of the pod. You can install your own Bundles locally by placing a conformant Bundle file somewhere into your @INC path. The autobundle() command which is available in the shell interface does that for you by including all currently installed modules in a snapshot bundle file. =head1 PREREQUISITES The CPAN program is trying to depend on as little as possible so the user can use it in hostile environment. It works better the more goodies the environment provides. For example if you try in the CPAN shell install Bundle::CPAN or install Bundle::CPANxxl you will find the shell more convenient than the bare shell before. If you have a local mirror of CPAN and can access all files with "file:" URLs, then you only need a perl later than perl5.003 to run this module. Otherwise Net::FTP is strongly recommended. LWP may be required for non-UNIX systems, or if your nearest CPAN site is associated with a URL that is not C. If you have neither Net::FTP nor LWP, there is a fallback mechanism implemented for an external ftp command or for an external lynx command. =head1 UTILITIES =head2 Finding packages and VERSION This module presumes that all packages on CPAN =over 2 =item * declare their $VERSION variable in an easy to parse manner. This prerequisite can hardly be relaxed because it consumes far too much memory to load all packages into the running program just to determine the $VERSION variable. Currently all programs that are dealing with version use something like this perl -MExtUtils::MakeMaker -le \ 'print MM->parse_version(shift)' filename If you are author of a package and wonder if your $VERSION can be parsed, please try the above method. =item * come as compressed or gzipped tarfiles or as zip files and contain a C or C (well, we try to handle a bit more, but with little enthusiasm). =back =head2 Debugging Debugging this module is more than a bit complex due to interference from the software producing the indices on CPAN, the mirroring process on CPAN, packaging, configuration, synchronicity, and even (gasp!) due to bugs within the CPAN.pm module itself. For debugging the code of CPAN.pm itself in interactive mode, some debugging aid can be turned on for most packages within CPAN.pm with one of =over 2 =item o debug package... sets debug mode for packages. =item o debug -package... unsets debug mode for packages. =item o debug all turns debugging on for all packages. =item o debug number =back which sets the debugging packages directly. Note that C turns debugging off. What seems a successful strategy is the combination of C and the debugging switches. Add a new debug statement while running in the shell and then issue a C and see the new debugging messages immediately without losing the current context. C without an argument lists the valid package names and the current set of packages in debugging mode. C has built-in completion support. For debugging of CPAN data there is the C command which takes the same arguments as make/test/install and outputs each object's Data::Dumper dump. If an argument looks like a perl variable and contains one of C<$>, C<@> or C<%>, it is eval()ed and fed to Data::Dumper directly. =head2 Floppy, Zip, Offline Mode CPAN.pm works nicely without network access, too. If you maintain machines that are not networked at all, you should consider working with C URLs. You'll have to collect your modules somewhere first. So you might use CPAN.pm to put together all you need on a networked machine. Then copy the $CPAN::Config->{keep_source_where} (but not $CPAN::Config->{build_dir}) directory on a floppy. This floppy is kind of a personal CPAN. CPAN.pm on the non-networked machines works nicely with this floppy. See also below the paragraph about CD-ROM support. =head2 Basic Utilities for Programmers =over 2 =item has_inst($module) Returns true if the module is installed. Used to load all modules into the running CPAN.pm that are considered optional. The config variable C intercepts the C call such that an optional module is not loaded despite being available. For example, the following command will prevent C from being loaded: cpan> o conf dontload_list push YAML See the source for details. =item use_inst($module) Similary to L tries to load optional library but also dies if library is not available =item has_usable($module) Returns true if the module is installed and in a usable state. Only useful for a handful of modules that are used internally. See the source for details. =item instance($module) The constructor for all the singletons used to represent modules, distributions, authors, and bundles. If the object already exists, this method returns the object; otherwise, it calls the constructor. =item frontend() =item frontend($new_frontend) Getter/setter for frontend object. Method just allows to subclass CPAN.pm. =back =head1 SECURITY There's no strong security layer in CPAN.pm. CPAN.pm helps you to install foreign, unmasked, unsigned code on your machine. We compare to a checksum that comes from the net just as the distribution file itself. But we try to make it easy to add security on demand: =head2 Cryptographically signed modules Since release 1.77, CPAN.pm has been able to verify cryptographically signed module distributions using Module::Signature. The CPAN modules can be signed by their authors, thus giving more security. The simple unsigned MD5 checksums that were used before by CPAN protect mainly against accidental file corruption. You will need to have Module::Signature installed, which in turn requires that you have at least one of Crypt::OpenPGP module or the command-line F tool installed. You will also need to be able to connect over the Internet to the public key servers, like pgp.mit.edu, and their port 11731 (the HKP protocol). The configuration parameter check_sigs is there to turn signature checking on or off. =head1 EXPORT Most functions in package CPAN are exported by default. The reason for this is that the primary use is intended for the cpan shell or for one-liners. =head1 ENVIRONMENT When the CPAN shell enters a subshell via the look command, it sets the environment CPAN_SHELL_LEVEL to 1, or increments that variable if it is already set. When CPAN runs, it sets the environment variable PERL5_CPAN_IS_RUNNING to the ID of the running process. It also sets PERL5_CPANPLUS_IS_RUNNING to prevent runaway processes which could happen with older versions of Module::Install. When running C, the environment variable C is set to the full path of the C that is being executed. This prevents runaway processes with newer versions of Module::Install. When the config variable ftp_passive is set, all downloads will be run with the environment variable FTP_PASSIVE set to this value. This is in general a good idea as it influences both Net::FTP and LWP based connections. The same effect can be achieved by starting the cpan shell with this environment variable set. For Net::FTP alone, one can also always set passive mode by running libnetcfg. =head1 POPULATE AN INSTALLATION WITH LOTS OF MODULES Populating a freshly installed perl with one's favorite modules is pretty easy if you maintain a private bundle definition file. To get a useful blueprint of a bundle definition file, the command autobundle can be used on the CPAN shell command line. This command writes a bundle definition file for all modules installed for the current perl interpreter. It's recommended to run this command once only, and from then on maintain the file manually under a private name, say Bundle/my_bundle.pm. With a clever bundle file you can then simply say cpan> install Bundle::my_bundle then answer a few questions and go out for coffee (possibly even in a different city). Maintaining a bundle definition file means keeping track of two things: dependencies and interactivity. CPAN.pm sometimes fails on calculating dependencies because not all modules define all MakeMaker attributes correctly, so a bundle definition file should specify prerequisites as early as possible. On the other hand, it's annoying that so many distributions need some interactive configuring. So what you can try to accomplish in your private bundle file is to have the packages that need to be configured early in the file and the gentle ones later, so you can go out for coffee after a few minutes and leave CPAN.pm to churn away unattended. =head1 WORKING WITH CPAN.pm BEHIND FIREWALLS Thanks to Graham Barr for contributing the following paragraphs about the interaction between perl, and various firewall configurations. For further information on firewalls, it is recommended to consult the documentation that comes with the I program. If you are unable to go through the firewall with a simple Perl setup, it is likely that you can configure I so that it works through your firewall. =head2 Three basic types of firewalls Firewalls can be categorized into three basic types. =over 4 =item http firewall This is when the firewall machine runs a web server, and to access the outside world, you must do so via that web server. If you set environment variables like http_proxy or ftp_proxy to values beginning with http://, or in your web browser you've proxy information set, then you know you are running behind an http firewall. To access servers outside these types of firewalls with perl (even for ftp), you need LWP or HTTP::Tiny. =item ftp firewall This where the firewall machine runs an ftp server. This kind of firewall will only let you access ftp servers outside the firewall. This is usually done by connecting to the firewall with ftp, then entering a username like "user@outside.host.com". To access servers outside these type of firewalls with perl, you need Net::FTP. =item One-way visibility One-way visibility means these firewalls try to make themselves invisible to users inside the firewall. An FTP data connection is normally created by sending your IP address to the remote server and then listening for the return connection. But the remote server will not be able to connect to you because of the firewall. For these types of firewall, FTP connections need to be done in a passive mode. There are two that I can think off. =over 4 =item SOCKS If you are using a SOCKS firewall, you will need to compile perl and link it with the SOCKS library. This is what is normally called a 'socksified' perl. With this executable you will be able to connect to servers outside the firewall as if it were not there. =item IP Masquerade This is when the firewall implemented in the kernel (via NAT, or networking address translation), it allows you to hide a complete network behind one IP address. With this firewall no special compiling is needed as you can access hosts directly. For accessing ftp servers behind such firewalls you usually need to set the environment variable C or the config variable ftp_passive to a true value. =back =back =head2 Configuring lynx or ncftp for going through a firewall If you can go through your firewall with e.g. lynx, presumably with a command such as /usr/local/bin/lynx -pscott:tiger then you would configure CPAN.pm with the command o conf lynx "/usr/local/bin/lynx -pscott:tiger" That's all. Similarly for ncftp or ftp, you would configure something like o conf ncftp "/usr/bin/ncftp -f /home/scott/ncftplogin.cfg" Your mileage may vary... =head1 FAQ =over 4 =item 1) I installed a new version of module X but CPAN keeps saying, I have the old version installed Probably you B have the old version installed. This can happen if a module installs itself into a different directory in the @INC path than it was previously installed. This is not really a CPAN.pm problem, you would have the same problem when installing the module manually. The easiest way to prevent this behaviour is to add the argument C to the C call, and that is why many people add this argument permanently by configuring o conf make_install_arg UNINST=1 =item 2) So why is UNINST=1 not the default? Because there are people who have their precise expectations about who may install where in the @INC path and who uses which @INC array. In fine tuned environments C can cause damage. =item 3) I want to clean up my mess, and install a new perl along with all modules I have. How do I go about it? Run the autobundle command for your old perl and optionally rename the resulting bundle file (e.g. Bundle/mybundle.pm), install the new perl with the Configure option prefix, e.g. ./Configure -Dprefix=/usr/local/perl-5.6.78.9 Install the bundle file you produced in the first step with something like cpan> install Bundle::mybundle and you're done. =item 4) When I install bundles or multiple modules with one command there is too much output to keep track of. You may want to configure something like o conf make_arg "| tee -ai /root/.cpan/logs/make.out" o conf make_install_arg "| tee -ai /root/.cpan/logs/make_install.out" so that STDOUT is captured in a file for later inspection. =item 5) I am not root, how can I install a module in a personal directory? As of CPAN 1.9463, if you do not have permission to write the default perl library directories, CPAN's configuration process will ask you whether you want to bootstrap , which makes keeping a personal perl library directory easy. Another thing you should bear in mind is that the UNINST parameter can be dangerous when you are installing into a private area because you might accidentally remove modules that other people depend on that are not using the private area. =item 6) How to get a package, unwrap it, and make a change before building it? Have a look at the C (!) command. =item 7) I installed a Bundle and had a couple of fails. When I retried, everything resolved nicely. Can this be fixed to work on first try? The reason for this is that CPAN does not know the dependencies of all modules when it starts out. To decide about the additional items to install, it just uses data found in the META.yml file or the generated Makefile. An undetected missing piece breaks the process. But it may well be that your Bundle installs some prerequisite later than some depending item and thus your second try is able to resolve everything. Please note, CPAN.pm does not know the dependency tree in advance and cannot sort the queue of things to install in a topologically correct order. It resolves perfectly well B all modules declare the prerequisites correctly with the PREREQ_PM attribute to MakeMaker or the C stanza of Module::Build. For bundles which fail and you need to install often, it is recommended to sort the Bundle definition file manually. =item 8) In our intranet, we have many modules for internal use. How can I integrate these modules with CPAN.pm but without uploading the modules to CPAN? Have a look at the CPAN::Site module. =item 9) When I run CPAN's shell, I get an error message about things in my C (or C<~/.inputrc>) file. These are readline issues and can only be fixed by studying readline configuration on your architecture and adjusting the referenced file accordingly. Please make a backup of the C or C<~/.inputrc> and edit them. Quite often harmless changes like uppercasing or lowercasing some arguments solves the problem. =item 10) Some authors have strange characters in their names. Internally CPAN.pm uses the UTF-8 charset. If your terminal is expecting ISO-8859-1 charset, a converter can be activated by setting term_is_latin to a true value in your config file. One way of doing so would be cpan> o conf term_is_latin 1 If other charset support is needed, please file a bug report against CPAN.pm at rt.cpan.org and describe your needs. Maybe we can extend the support or maybe UTF-8 terminals become widely available. Note: this config variable is deprecated and will be removed in a future version of CPAN.pm. It will be replaced with the conventions around the family of $LANG and $LC_* environment variables. =item 11) When an install fails for some reason and then I correct the error condition and retry, CPAN.pm refuses to install the module, saying C. You could use the force pragma like so force install Foo::Bar Or, to avoid a force install (which would install even if the tests fail), you can force only the test and then install: force test Foo::Bar install Foo::Bar Or you can use look Foo::Bar and then C directly in the subshell. =item 12) How do I install a "DEVELOPER RELEASE" of a module? By default, CPAN will install the latest non-developer release of a module. If you want to install a dev release, you have to specify the partial path starting with the author id to the tarball you wish to install, like so: cpan> install KWILLIAMS/Module-Build-0.27_07.tar.gz Note that you can use the C command to get this path listed. =item 13) How do I install a module and all its dependencies from the commandline, without being prompted for anything, despite my CPAN configuration (or lack thereof)? CPAN uses ExtUtils::MakeMaker's prompt() function to ask its questions, so if you set the PERL_MM_USE_DEFAULT environment variable, you shouldn't be asked any questions at all (assuming the modules you are installing are nice about obeying that variable as well): % PERL_MM_USE_DEFAULT=1 perl -MCPAN -e 'install My::Module' =item 14) How do I create a Module::Build based Build.PL derived from an ExtUtils::MakeMaker focused Makefile.PL? http://search.cpan.org/dist/Module-Build-Convert/ =item 15) I'm frequently irritated with the CPAN shell's inability to help me select a good mirror. CPAN can now help you select a "good" mirror, based on which ones have the lowest 'ping' round-trip times. From the shell, use the command 'o conf init urllist' and allow CPAN to automatically select mirrors for you. Beyond that help, the urllist config parameter is yours. You can add and remove sites at will. You should find out which sites have the best up-to-dateness, bandwidth, reliability, etc. and are topologically close to you. Some people prefer fast downloads, others up-to-dateness, others reliability. You decide which to try in which order. Henk P. Penning maintains a site that collects data about CPAN sites: http://mirrors.cpan.org/ Also, feel free to play with experimental features. Run o conf init randomize_urllist ftpstats_period ftpstats_size and choose your favorite parameters. After a few downloads running the C command will probably assist you in choosing the best mirror sites. =item 16) Why do I get asked the same questions every time I start the shell? You can make your configuration changes permanent by calling the command C. Alternatively set the C variable to true by running C and answering the following question with yes. =item 17) Older versions of CPAN.pm had the original root directory of all tarballs in the build directory. Now there are always random characters appended to these directory names. Why was this done? The random characters are provided by File::Temp and ensure that each module's individual build directory is unique. This makes running CPAN.pm in concurrent processes simultaneously safe. =item 18) Speaking of the build directory. Do I have to clean it up myself? You have the choice to set the config variable C to C. Then you must clean it up yourself. The other possible values, C and C clean up the build directory when you start (or more precisely, after the first extraction into the build directory) or exit the CPAN shell, respectively. If you never start up the CPAN shell, you probably also have to clean up the build directory yourself. =item 19) How can I switch to sudo instead of local::lib? The following 5 environment veriables need to be reset to the previous values: PATH, PERL5LIB, PERL_LOCAL_LIB_ROOT, PERL_MB_OPT, PERL_MM_OPT; and these two CPAN.pm config variables must be reconfigured: make_install_make_command and mbuild_install_build_command. The five env variables have probably been overwritten in your $HOME/.bashrc or some equivalent. You either find them there and delete their traces and logout/login or you override them temporarily, depending on your exact desire. The two cpanpm config variables can be set with: o conf init /install_.*_command/ probably followed by o conf commit =item 20) How do recommends_policy and suggests_policy work, exactly? The terms C and C have been standardized in https://metacpan.org/pod/CPAN::Meta::Spec In CPAN.pm, if you set C to a true value, that means: if you then install a distribution C that I a module C, both C and C will be tested and potentially installed. Similarly, if you set C to a true value, it means: if you install a distribution C that I a module C, both C and C will be tested and potentially installed. In either case, when C passes its tests and C does not pass its tests, C will be installed nontheless. But if C does not pass its tests, neither will be installed. This also works recursively for all recommends and suggests of the module C. This has also been illustrated by a cpan tester, who wrote: I just tested Starlink-AST-3.03 which recommends Tk::Zinc; Tk-Zinc-3.306 fails with http://www.cpantesters.org/cpan/report/a2de7c38-810d-11ee-9ad4-e2167316189a ; nonetheless Starlink-AST-3.03 succeeds with http://www.cpantesters.org/cpan/report/9352e754-810d-11ee-90e9-46117316189a =back =head1 COMPATIBILITY =head2 OLD PERL VERSIONS CPAN.pm is regularly tested to run under 5.005 and assorted newer versions. It is getting more and more difficult to get the minimal prerequisites working on older perls. It is close to impossible to get the whole Bundle::CPAN working there. If you're in the position to have only these old versions, be advised that CPAN is designed to work fine without the Bundle::CPAN installed. To get things going, note that GBARR/Scalar-List-Utils-1.18.tar.gz is compatible with ancient perls and that File::Temp is listed as a prerequisite but CPAN has reasonable workarounds if it is missing. =head2 CPANPLUS This module and its competitor, the CPANPLUS module, are both much cooler than the other. CPAN.pm is older. CPANPLUS was designed to be more modular, but it was never intended to be compatible with CPAN.pm. =head2 CPANMINUS In the year 2010 App::cpanminus was launched as a new approach to a cpan shell with a considerably smaller footprint. Very cool stuff. =head1 SECURITY ADVICE This software enables you to upgrade software on your computer and so is inherently dangerous because the newly installed software may contain bugs and may alter the way your computer works or even make it unusable. Please consider backing up your data before every upgrade. =head1 BUGS Please report bugs via L Before submitting a bug, please make sure that the traditional method of building a Perl module package from a shell by following the installation instructions of that package still works in your environment. =head1 AUTHOR Andreas Koenig C<< >> =head1 LICENSE This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See L =head1 TRANSLATIONS Kawai,Takanori provides a Japanese translation of a very old version of this manpage at L =head1 SEE ALSO Many people enter the CPAN shell by running the L utility program which is installed in the same directory as perl itself. So if you have this directory in your PATH variable (or some equivalent in your operating system) then typing C in a console window will work for you as well. Above that the utility provides several commandline shortcuts. melezhik (Alexey) sent me a link where he published a chef recipe to work with CPAN.pm: http://community.opscode.com/cookbooks/cpan. =cut