You are viewing the version of this documentation from Perl 5.8.8. View the latest version

CONTENTS

NAME

perlintern - autogenerated documentation of purely internal Perl functions

DESCRIPTION

This file is the autogenerated documentation of functions in the Perl interpreter that are documented using Perl's internal documentation format but are not marked as part of the Perl API. In other words, they are not for use in extensions!

CV reference counts and CvOUTSIDE

CvWEAKOUTSIDE

Each CV has a pointer, CvOUTSIDE(), to its lexically enclosing CV (if any). Because pointers to anonymous sub prototypes are stored in & pad slots, it is a possible to get a circular reference, with the parent pointing to the child and vice-versa. To avoid the ensuing memory leak, we do not increment the reference count of the CV pointed to by CvOUTSIDE in the one specific instance that the parent has a & pad slot pointing back to us. In this case, we set the CvWEAKOUTSIDE flag in the child. This allows us to determine under what circumstances we should decrement the refcount of the parent when freeing the child.

There is a further complication with non-closure anonymous subs (i.e. those that do not refer to any lexicals outside that sub). In this case, the anonymous prototype is shared rather than being cloned. This has the consequence that the parent may be freed while there are still active children, eg

BEGIN { $a = sub { eval '$x' } }

In this case, the BEGIN is freed immediately after execution since there are no active references to it: the anon sub prototype has CvWEAKOUTSIDE set since it's not a closure, and $a points to the same CV, so it doesn't contribute to BEGIN's refcount either. When $a is executed, the eval '$x' causes the chain of CvOUTSIDEs to be followed, and the freed BEGIN is accessed.

To avoid this, whenever a CV and its associated pad is freed, any & entries in the pad are explicitly removed from the pad, and if the refcount of the pointed-to anon sub is still positive, then that child's CvOUTSIDE is set to point to its grandparent. This will only occur in the single specific case of a non-closure anon prototype having one or more active references (such as $a above).

One other thing to consider is that a CV may be merely undefined rather than freed, eg undef &foo. In this case, its refcount may not have reached zero, but we still delete its pad and its CvROOT etc. Since various children may still have their CvOUTSIDE pointing at this undefined CV, we keep its own CvOUTSIDE for the time being, so that the chain of lexical scopes is unbroken. For example, the following should print 123:

    my $x = 123;
    sub tmp { sub { eval '$x' } }
    my $a = tmp();
    undef &tmp;
    print  $a->();

	bool	CvWEAKOUTSIDE(CV *cv)

Functions in file pad.h

CX_CURPAD_SAVE

Save the current pad in the given context block structure.

void	CX_CURPAD_SAVE(struct context)
CX_CURPAD_SV

Access the SV at offset po in the saved current pad in the given context block structure (can be used as an lvalue).

SV *	CX_CURPAD_SV(struct context, PADOFFSET po)
PAD_BASE_SV

Get the value from slot po in the base (DEPTH=1) pad of a padlist

SV *	PAD_BASE_SV(PADLIST padlist, PADOFFSET po)
PAD_CLONE_VARS

|CLONE_PARAMS* param Clone the state variables associated with running and compiling pads.

void	PAD_CLONE_VARS(PerlInterpreter *proto_perl \)
PAD_COMPNAME_FLAGS

Return the flags for the current compiling pad name at offset po. Assumes a valid slot entry.

U32	PAD_COMPNAME_FLAGS(PADOFFSET po)
PAD_COMPNAME_GEN

The generation number of the name at offset po in the current compiling pad (lvalue). Note that SvCUR is hijacked for this purpose.

STRLEN	PAD_COMPNAME_GEN(PADOFFSET po)
PAD_COMPNAME_GEN_set

Sets the generation number of the name at offset po in the current ling pad (lvalue) to gen. Note that SvCUR_set is hijacked for this purpose.

STRLEN	PAD_COMPNAME_GEN_set(PADOFFSET po, int gen)
PAD_COMPNAME_OURSTASH

Return the stash associated with an our variable. Assumes the slot entry is a valid our lexical.

HV *	PAD_COMPNAME_OURSTASH(PADOFFSET po)
PAD_COMPNAME_PV

Return the name of the current compiling pad name at offset po. Assumes a valid slot entry.

char *	PAD_COMPNAME_PV(PADOFFSET po)
PAD_COMPNAME_TYPE

Return the type (stash) of the current compiling pad name at offset po. Must be a valid name. Returns null if not typed.

HV *	PAD_COMPNAME_TYPE(PADOFFSET po)
PAD_DUP

Clone a padlist.

void	PAD_DUP(PADLIST dstpad, PADLIST srcpad, CLONE_PARAMS* param)
PAD_RESTORE_LOCAL

Restore the old pad saved into the local variable opad by PAD_SAVE_LOCAL()

void	PAD_RESTORE_LOCAL(PAD *opad)
PAD_SAVE_LOCAL

Save the current pad to the local variable opad, then make the current pad equal to npad

void	PAD_SAVE_LOCAL(PAD *opad, PAD *npad)
PAD_SAVE_SETNULLPAD

Save the current pad then set it to null.

void	PAD_SAVE_SETNULLPAD()
PAD_SETSV

Set the slot at offset po in the current pad to sv

SV *	PAD_SETSV(PADOFFSET po, SV* sv)
PAD_SET_CUR

Set the current pad to be pad n in the padlist, saving the previous current pad. NB currently this macro expands to a string too long for some compilers, so it's best to replace it with

    SAVECOMPPAD();
    PAD_SET_CUR_NOSAVE(padlist,n);


	void	PAD_SET_CUR(PADLIST padlist, I32 n)
PAD_SET_CUR_NOSAVE

like PAD_SET_CUR, but without the save

void	PAD_SET_CUR_NOSAVE(PADLIST padlist, I32 n)
PAD_SV

Get the value at offset po in the current pad

void	PAD_SV(PADOFFSET po)
PAD_SVl

Lightweight and lvalue version of PAD_SV. Get or set the value at offset po in the current pad. Unlike PAD_SV, does not print diagnostics with -DX. For internal use only.

SV *	PAD_SVl(PADOFFSET po)
SAVECLEARSV

Clear the pointed to pad value on scope exit. (i.e. the runtime action of 'my')

void	SAVECLEARSV(SV **svp)
SAVECOMPPAD

save PL_comppad and PL_curpad

void	SAVECOMPPAD()
SAVEPADSV

Save a pad slot (used to restore after an iteration)

XXX DAPM it would make more sense to make the arg a PADOFFSET void SAVEPADSV(PADOFFSET po)

Functions in file pp_ctl.c

find_runcv

Locate the CV corresponding to the currently executing sub or eval. If db_seqp is non_null, skip CVs that are in the DB package and populate *db_seqp with the cop sequence number at the point that the DB:: code was entered. (allows debuggers to eval in the scope of the breakpoint rather than in the scope of the debugger itself).

CV*	find_runcv(U32 *db_seqp)

Global Variables

PL_DBsingle

When Perl is run in debugging mode, with the -d switch, this SV is a boolean which indicates whether subs are being single-stepped. Single-stepping is automatically turned on after every step. This is the C variable which corresponds to Perl's $DB::single variable. See PL_DBsub.

SV *	PL_DBsingle
PL_DBsub

When Perl is run in debugging mode, with the -d switch, this GV contains the SV which holds the name of the sub being debugged. This is the C variable which corresponds to Perl's $DB::sub variable. See PL_DBsingle.

GV *	PL_DBsub
PL_DBtrace

Trace variable used when Perl is run in debugging mode, with the -d switch. This is the C variable which corresponds to Perl's $DB::trace variable. See PL_DBsingle.

SV *	PL_DBtrace
PL_dowarn

The C variable which corresponds to Perl's $^W warning variable.

bool	PL_dowarn
PL_last_in_gv

The GV which was last used for a filehandle input operation. (<FH>)

GV*	PL_last_in_gv
PL_ofs_sv

The output field separator - $, in Perl space.

SV*	PL_ofs_sv
PL_rs

The input record separator - $/ in Perl space.

SV*	PL_rs

GV Functions

is_gv_magical

Returns TRUE if given the name of a magical GV.

Currently only useful internally when determining if a GV should be created even in rvalue contexts.

flags is not used at present but available for future extension to allow selecting particular classes of magical variable.

Currently assumes that name is NUL terminated (as well as len being valid). This assumption is met by all callers within the perl core, which all pass pointers returned by SvPV.

bool	is_gv_magical(char *name, STRLEN len, U32 flags)

IO Functions

start_glob

Function called by do_readline to spawn a glob (or do the glob inside perl on VMS). This code used to be inline, but now perl uses File::Glob this glob starter is only used by miniperl during the build process. Moving it away shrinks pp_hot.c; shrinking pp_hot.c helps speed perl up.

PerlIO*	start_glob(SV* pattern, IO *io)

Pad Data Structures

CvPADLIST

CV's can have CvPADLIST(cv) set to point to an AV.

For these purposes "forms" are a kind-of CV, eval""s are too (except they're not callable at will and are always thrown away after the eval"" is done executing).

XSUBs don't have CvPADLIST set - dXSTARG fetches values from PL_curpad, but that is really the callers pad (a slot of which is allocated by every entersub).

The CvPADLIST AV has does not have AvREAL set, so REFCNT of component items is managed "manual" (mostly in pad.c) rather than normal av.c rules. The items in the AV are not SVs as for a normal AV, but other AVs:

0'th Entry of the CvPADLIST is an AV which represents the "names" or rather the "static type information" for lexicals.

The CvDEPTH'th entry of CvPADLIST AV is an AV which is the stack frame at that depth of recursion into the CV. The 0'th slot of a frame AV is an AV which is @_. other entries are storage for variables and op targets.

During compilation: PL_comppad_name is set to the names AV. PL_comppad is set to the frame AV for the frame CvDEPTH == 1. PL_curpad is set to the body of the frame AV (i.e. AvARRAY(PL_comppad)).

During execution, PL_comppad and PL_curpad refer to the live frame of the currently executing sub.

Iterating over the names AV iterates over all possible pad items. Pad slots that are SVs_PADTMP (targets/GVs/constants) end up having &PL_sv_undef "names" (see pad_alloc()).

Only my/our variable (SVs_PADMY/SVs_PADOUR) slots get valid names. The rest are op targets/GVs/constants which are statically allocated or resolved at compile time. These don't have names by which they can be looked up from Perl code at run time through eval"" like my/our variables can be. Since they can't be looked up by "name" but only by their index allocated at compile time (which is usually in PL_op->op_targ), wasting a name SV for them doesn't make sense.

The SVs in the names AV have their PV being the name of the variable. NV+1..IV inclusive is a range of cop_seq numbers for which the name is valid. For typed lexicals name SV is SVt_PVMG and SvSTASH points at the type. For our lexicals, the type is SVt_PVGV, and GvSTASH points at the stash of the associated global (so that duplicate our declarations in the same package can be detected). SvCUR is sometimes hijacked to store the generation number during compilation.

If SvFAKE is set on the name SV then slot in the frame AVs are a REFCNT'ed references to a lexical from "outside". In this case, the name SV does not have a cop_seq range, since it is in scope throughout.

If the 'name' is '&' the corresponding entry in frame AV is a CV representing a possible closure. (SvFAKE and name of '&' is not a meaningful combination currently but could become so if my sub foo {} is implemented.)

The flag SVf_PADSTALE is cleared on lexicals each time the my() is executed, and set on scope exit. This allows the 'Variable $x is not available' warning to be generated in evals, such as

    { my $x = 1; sub f { eval '$x'} } f();

	AV *	CvPADLIST(CV *cv)
cv_clone

Clone a CV: make a new CV which points to the same code etc, but which has a newly-created pad built by copying the prototype pad and capturing any outer lexicals.

CV*	cv_clone(CV* proto)
cv_dump

dump the contents of a CV

void	cv_dump(const CV *cv, const char *title)
do_dump_pad

Dump the contents of a padlist

void	do_dump_pad(I32 level, PerlIO *file, PADLIST *padlist, int full)
intro_my

"Introduce" my variables to visible status.

U32	intro_my()
pad_add_anon

Add an anon code entry to the current compiling pad

PADOFFSET	pad_add_anon(SV* sv, OPCODE op_type)
pad_add_name

Create a new name in the current pad at the specified offset. If typestash is valid, the name is for a typed lexical; set the name's stash to that value. If ourstash is valid, it's an our lexical, set the name's GvSTASH to that value

Also, if the name is @.. or %.., create a new array or hash for that slot

If fake, it means we're cloning an existing entry

PADOFFSET	pad_add_name(char *name, HV* typestash, HV* ourstash, bool clone)
pad_alloc

Allocate a new my or tmp pad entry. For a my, simply push a null SV onto the end of PL_comppad, but for a tmp, scan the pad from PL_padix upwards for a slot which has no name and no active value.

PADOFFSET	pad_alloc(I32 optype, U32 tmptype)
pad_block_start

Update the pad compilation state variables on entry to a new block

void	pad_block_start(int full)
pad_check_dup

Check for duplicate declarations: report any of: * a my in the current scope with the same name; * an our (anywhere in the pad) with the same name and the same stash as ourstash is_our indicates that the name to check is an 'our' declaration

void	pad_check_dup(char* name, bool is_our, HV* ourstash)
pad_findlex

Find a named lexical anywhere in a chain of nested pads. Add fake entries in the inner pads if it's found in an outer one. innercv is the CV *inside* the chain of outer CVs to be searched. If newoff is non-null, this is a run-time cloning: don't add fake entries, just find the lexical and add a ref to it at newoff in the current pad.

PADOFFSET	pad_findlex(const char* name, PADOFFSET newoff, const CV* innercv)
pad_findmy

Given a lexical name, try to find its offset, first in the current pad, or failing that, in the pads of any lexically enclosing subs (including the complications introduced by eval). If the name is found in an outer pad, then a fake entry is added to the current pad. Returns the offset in the current pad, or NOT_IN_PAD on failure.

PADOFFSET	pad_findmy(char* name)
pad_fixup_inner_anons

For any anon CVs in the pad, change CvOUTSIDE of that CV from old_cv to new_cv if necessary. Needed when a newly-compiled CV has to be moved to a pre-existing CV struct.

void	pad_fixup_inner_anons(PADLIST *padlist, CV *old_cv, CV *new_cv)
pad_free

Free the SV at offset po in the current pad.

void	pad_free(PADOFFSET po)
pad_leavemy

Cleanup at end of scope during compilation: set the max seq number for lexicals in this scope and warn of any lexicals that never got introduced.

void	pad_leavemy()
pad_new

Create a new compiling padlist, saving and updating the various global vars at the same time as creating the pad itself. The following flags can be OR'ed together:

    padnew_CLONE	this pad is for a cloned CV
    padnew_SAVE		save old globals
    padnew_SAVESUB	also save extra stuff for start of sub

	PADLIST*	pad_new(int flags)
pad_push

Push a new pad frame onto the padlist, unless there's already a pad at this depth, in which case don't bother creating a new one. If has_args is true, give the new pad an @_ in slot zero.

void	pad_push(PADLIST *padlist, int depth, int has_args)
pad_reset

Mark all the current temporaries for reuse

void	pad_reset()
pad_setsv

Set the entry at offset po in the current pad to sv. Use the macro PAD_SETSV() rather than calling this function directly.

void	pad_setsv(PADOFFSET po, SV* sv)
pad_swipe

Abandon the tmp in the current pad at offset po and replace with a new one.

void	pad_swipe(PADOFFSET po, bool refadjust)
pad_tidy

Tidy up a pad after we've finished compiling it: * remove most stuff from the pads of anonsub prototypes; * give it a @_; * mark tmps as such.

void	pad_tidy(padtidy_type type)
pad_undef

Free the padlist associated with a CV. If parts of it happen to be current, we null the relevant PL_*pad* global vars so that we don't have any dangling references left. We also repoint the CvOUTSIDE of any about-to-be-orphaned inner subs to the outer of this cv.

(This function should really be called pad_free, but the name was already taken)

void	pad_undef(CV* cv)

Stack Manipulation Macros

djSP

Declare Just SP. This is actually identical to dSP, and declares a local copy of perl's stack pointer, available via the SP macro. See SP. (Available for backward source code compatibility with the old (Perl 5.005) thread model.)

djSP;
LVRET

True if this op will be the return value of an lvalue subroutine

SV Manipulation Functions

report_uninit

Print appropriate "Use of uninitialized variable" warning

void	report_uninit()
sv_add_arena

Given a chunk of memory, link it to the head of the list of arenas, and split it into a list of free SVs.

void	sv_add_arena(char* ptr, U32 size, U32 flags)
sv_clean_all

Decrement the refcnt of each remaining SV, possibly triggering a cleanup. This function may have to be called multiple times to free SVs which are in complex self-referential hierarchies.

I32	sv_clean_all()
sv_clean_objs

Attempt to destroy all objects not yet freed

void	sv_clean_objs()
sv_free_arenas

Deallocate the memory used by all arenas. Note that all the individual SV heads and bodies within the arenas must already have been freed.

void	sv_free_arenas()

AUTHORS

The autodocumentation system was originally added to the Perl core by Benjamin Stuhl. Documentation is by whoever was kind enough to document their functions.

SEE ALSO

perlguts(1), perlapi(1)